Teradek Beam Transmitter & Receiver Set with Two Gold-Mount Plates
Product #31180
SKU 10-0581
Usually ships in 3 - 4 weeks


Teradek Beam Transmitter & Receiver Set with Two Gold-Mount Plates

Product #31180 | SKU 10-0581
Usually ships in 3 - 4 weeks

Product Features
  • 5GHz Wireless Video & Audio Transmission
  • Supports Resolutions Up to 1080p60
  • 762 m Distance with 70ms-80ms Latency
  • Includes Battery Plate for Both Units
  • 3G-SDI Input & Loop; 3G-SDI Output
Our Price $8,949.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The Teradek Beam system transmits up to 1080p60 video with audio for up to 762 mover the licence-free 5GHz frequency. Latency is only 70ms-80ms, which comes out to approximately 2 frames. This set includes one transmitter with a 3G-SDI input and loop output, and one receiver with a 3G-SDI output, and Gold-mount battery plates are included for both units. The transmitter comes with a Gold-mount male plate on one side and female on the other and is meant to be sandwiched in between your camera and battery. Both units also offer RJ45 ports supporting wired LAN transfer and bidirectional serial control.

Video is encoded in the H.264 codec and delivered at 30 Mbps over the 5GHz band and 50 Mbps over a LAN. The system uses RTSP streaming and also includes an MPEG-TS streaming licence that you can switch over to via the OLED menu display.

The transmitter has multicast capability in both 5GHz and LAN modes, supporting up to four receivers simultaneously. Both the transmitter and receiver also feature mic inputs and headphone outputs allowing two-way communication. Both units also offer 1/4"-20 mounting threads on the bottom.

Key Features

  • Transmits up 1080p60 for up to 762 m over the 5GHz frequency
  • 70ms-80ms latency (approximately 2 frames)
  • 3G-SDI input and loop output / 3G-SDI output
  • Includes Gold-mount plates for both the transmitter and receiver
  • RJ45 ports supporting wired LAN transfer
  • RJ45 ports for bidirectional serial control
  • H.264 encoding
  • 30 Mbps bit rate over 5 GHz and 50 Mbps over LAN
  • RTSP and MPEG-TS streaming
  • OLED menu display
  • Mic and headphone connections allowing two way communication
  • Dedicated bidirectional IFB channel
  • Multicast capable, supporting up to 4 receivers
Connections Transmitter:
1x 3G/HD/SD-SDI input
1x 3G-SDI loop output
1x RJ45 LAN port
1x RJ45 serial port
1x Mic input
1x Headphone output
1x USB port
1x 2-pin LEMO power port

Receiver:
1x 3G/HD/SD-SDI output
1x RJ45 LAN port
1x RJ45 serial port
1x Mic input
1x Headphone output
1x USB port
1x 2-pin LEMO power port
Supported Resolution 480i 59.94/60, 576i50, 720p50, 720p 59.94/60, 1080PsF 23.98/24, 1080p 23.98/24, 1080p25, 1080p30, 1080i50, 1080i 59.94/60, 1080p50, 1080p 59.94/60
Transmission Distance 2500 ft (762 m) line-of-sight
Latency 70 - 80 ms (min. 2 frames)
Sampling 4:2:0
Bit Rates 30 Mbps over 5GHz frequency, 50 Mbps over LAN
Codec H.264
Streaming Method RTPS or MPEG-TS
Menu Display OLED
Mount Types Gold-mount plates included for both transmitter and receiver
1/4"-20 thread on bottom of transmitter and receiver

In The Box

  • 3 x Transmitter Antennas
  • 3 x Receiver Antennas
  • Receiver Power Adapter
  • Pelican Case

Reviews

Own or use this product?
Give it a rating

In The Box

  • 3 x Transmitter Antennas
  • 3 x Receiver Antennas
  • Receiver Power Adapter
  • Pelican Case

Reviews

Own or use this product?
Give it a rating
Product:
Teradek Beam Transmitter & Receiver Set with Two Gold-Mount Plates
Manufacturer:
Teradek
Model:
10-0581
SKU:
10-0581
RM Product #:
31180