Wooden Camera Blackmagic URSA Mini Accessory Kit (Advanced) has been discontinued, here are some related products you might like:
Wooden Camera's Blackmagic URSA Mini Camera Accessory Kit (Advanced) is a professional camera support package designed for the Blackmagic URSA Mini camera. The URSA Mini accessory package includes: Top Plate (URSA Mini), a top mounting camera cheeseplate for accessory attachment, Quick Base (URSA Mini), a camera baseplate for holding the two 15mm Rods (6”) at the correct lens height, NATO Handle Kit (Plus, 70mm), a quick release handle that attaches to the top plate, has a rotating top grip, multiple mounting points for accessories, integrated shoe mount, and a 15mm/19mm rod opening.
Top Plate (URSA Mini) - Top mounting cheese plate for Blackmagic URSA Mini Camera. Attaches to camera top by (4) 1/4-20 screws. Arrays of 1/4-20 holes in standard 9mm spacing and multiple 3/8-16 holes for large accessories. ARRI accessory mount also available in several places (3/8-16 screw hole with locating pins adjacent). Includes tape hook for accurate focus measuring. Original Blackmagic handle can be reinstalled on the Top Plate using center 1/4-20 threaded holes.
Quick Base (URSA Mini) - A quick release baseplate for the Blackmagic URSA Mini that provides lightweight 15mm rods at the correct lens height. The baseplate can attach to any tripod plate or ARRI standard bridgeplate such as Bridgeplate (19mm) or Bridgeplate (15mm Studio). When studio rods are not needed, a Dovetail Clamp can be added instead to interface with 2060 Dovetails, Safety Dovetails, or Shoulder Rigs.
2x 15mm Rod (6") - Two 15mm diameter iris rods 6 inches (15cm) in length.
NATO Handle Kit (Plus, 70mm) - a quick release top handle that attaches and detaches without screws. Includes NATO Handle (Plus) and Safety NATO Rail (70mm) at a reduced package price. To attach to camera, slide onto NATO rail and turn thumbscrew to lock in place. Loosen top knob to adjust grip rotation. Sideways 15mm tube clamp allows for attachment of UVF Mount v2 (No Clamp). Forward facing 15mm rod opening and 19mm rear rod opening for attaching single rods for focus motors, etc. Integrated shoe mount for attaching on camera lights, microphone shock mounts, etc. 1/4-20 and 3/8-16 holes on grip area for attaching additional accessories. 1/4-20 holes on handle front for attaching Rod Clamps which allow for pass through rods front to back. Safety NATO Rail (70mm), included in kit, attaches to two 1/4-20 screw points spaced up to 42mm apart center to center.