Lanparte Single Handle DSLR Camera Rig Kit
Product #35543
SKU SHR-01
Usually ships in 2 - 3 weeks


Lanparte Single Handle DSLR Camera Rig Kit

Product #35543 | SKU SHR-01
Usually ships in 2 - 3 weeks

15mm Rod Shoulder-Mount Kit for DSLRs, Quick-Release Baseplate
Our Price $995.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The Lanparte Single Handle DSLR Camera Rig Kit is a 15mm-rod shoulder-mount solution for DSLRs or mirrorless cameras and comes complete with a clamp-on follow focus and a quick-release baseplate. The baseplate includes a pair of 11.8" 15mm rods to support the follow focus and a single handle with non-slip rubberised grip. The single handle setup lets you support the rig with one hand, while freeing up your other hand to operate the follow focus for run-and-gun shooting. To complete the shoulder-mounted system, a shoulder support with 7.9" 15mm rods is included, which attaches to the rear of the rig using an offset clamp. The offset design places your camera's rear LCD screen in front of your eyes for easier viewing while shooting.

The follow focus uses a clamping design that lets you attach it to the rods without having to remove the handles or other rod-mounted accessories. Integrated into the follow focus are A and B hard stops, letting you set start/end points on DSLR lenses that have continuously rotating focus rings. The follow focus features a 0.8 pitch drive gear, which can be positioned on either side of the gear box. For use with DSLR lenses that lack an integrated focus gear rings, an adjustable gear ring comes included.

Please see the links below for more information on the components of this kit.

The Lanparte Single Handle allows for single-handed support of 15mm LWS rod shoulder rigs, leaving your other hand free to focus the lens or adjust camera settings as you shoot. It is constructed from CNC machined aluminium and features a non-slip silica-gel grip and a dual rod clamp that places the handle directly below a pair of 15mm rods.

The Lanparte Follow Focus V2 clamps onto 15mm LWS rods, allowing you to smoothly and accurately pull focus with cinema and DSLR lenses equipped with gear rings. Its quick release design that lets you easily snap it onto the rods without having to remove other rod-mounted accessories, such as a matte box. Integrated into the follow focus are A and B hard stops, letting you set start/end points on DSLR lenses that have continuously rotating focus rings. Additionally, the follow focus features an ARRI standard accessory port for using optional focus whips and speed cranks. A standard 0.8 pitch gear comes includes, which can be positioned on either side of the gearbox, as well as a removable magnetic marking disc. Also included is an adjustable gear ring for use with DSLR lenses that lack integrated focus gear rings.

The Quick Release Baseplate from Lanparte is a quick-release baseplate designed to be used with a standard 15mm rod system. The bottom of the plate features 1/4" and 3/8" threads for tripod mounting. Two 11.8" aluminium rods are included.

Carry your rig on your shoulder by incorporating this Shoulder Support from Lanparte . Using dual 15mm clamps, the Shoulder Support secures to 15mm LWS rigs. A riser clamp is included for height adjust-ability. The shoulder pad is arced to comfortably sit on your shoulder for long periods of time. A pair of 15mm rods are also included in order to more easily incorporate this shoulder plate into your existing rig or extend it further back to fit more accessories.

Use the Lanparte Offset Clamp to offset the shoulder mount from the rest of your 15mm LWS rig, allowing your camera to be within your line-of-sight for chequing focus and composition without the aid of an external monitor or EVF.

Key Features

  • Clamps onto 15mm LWS rods
  • Integrated A/B hard stops
  • Copper gear and precision bearing
  • Standard 0.8 pitch drive gear included
  • Drive gear can be flipped to either side of gearbox
  • Sliding dovetail design for adjusting to different sized lenses
  • Removable magnetic marking disc
  • ARRI standard 12mm accessory port
  • CNC machined aluminium components
  • Adjustable lens gear ring included
  • Lightweight at 19.4 oz
  • For 15mm rod system
  • 1/4" and 3/8" camera screw threads under plate for tripod mounting
  • Ergonomic design
  • Compatible with 15mm rod systems
  • Power supply system can be mounted on it
  • A standard Height Raiser Clamp is included
  • Compatible with Offset Clamp and Adjustable Offset Clamp (sold separately)
  • Hollow design makes unit lightweight at 21.9 oz
  • Precision CNC machined
  • Offsets base plate from shoulder pad
  • Two double 15mm rod clamps
  • Hollow design saves weight
  • Streamlined knob
  • CNC machined

Specifications

Dimensions (HxWxD) 6.8 x 3.1 x 1.2" (17.3 7.8 x 3.1 cm)
Weight 6.3 oz (180 g)
Dimensions (WxHxD) 7.44 x 4.31 x 3.16" (188.97 x 109.60 x 80.25 mm)
Weight 1.12 lb (0.51 g)
Rod System 15 mm
Thread Size 1/4" and 3/8"
Dimensions 12.6 x 5.1 x 2.4" (32 x 13 x 6 cm)
Weight 19.4 oz (550 g)
Material Aluminium alloy, rubber pad
Dimensions 7.9 x 4.3 x 4.5" (20.0 x 10.9 x 11.3 cm)
Weight 21.9 oz (620.0 g)
Vertical Offset 1.77" (45 mm)
Horizontal Offset 4.13" (105 mm)
Dimensions 7.2 x 0.6 x 3.1" (18.3 x 1.5 x 7.8 cm)
Weight 3.5 oz (100 g)

Reviews

Own or use this product?
Give it a rating

Reviews

Own or use this product?
Give it a rating
Product:
Lanparte Single Handle DSLR Camera Rig Kit
Manufacturer:
Lanparte
Model:
SHR-01
SKU:
SHR-01
RM Product #:
35543