Video
Lanparte GoPro Clamp for Handheld Gimbal
GoPro clamp for the HHG-01 Gimbal system
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$64.95
Lanparte Speed Crank for Follow Focus
Enables faster focus pulling
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$62.95
Lanparte Long Focus Whip (405mm)
Designed to plug into the Lanparte Follow Focus' accessory port
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$299.00
Lanparte HDMI to Right-Angle Mini HDMI Cable (26")
Used for connecting your camera to a monitor or HDMI splitter
In stock
Ships Monday
You Pay:
$67.95
Lanparte Follow Focus V2 with Hard Stops for 15mm Rods
Allows you to smoothly pull focus with cinema and DSLR lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$919.00
Lanparte 0.8 Pitch Gear Mod for FF-01 / FF-02 Follow Focus Units (54 Teeth)
0.8 mod gear featuring 54 teeth
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$75.95
Lanparte Gear Ring for Follow Focus
Rubber gear with a standard pitch of 0.8 and maximum diameter of 4.1"
In stock
Ships Monday
You Pay:
$53.95
Lanparte Gear Ring with Pin-Lock Tightening Mechanism for Follow Focus
- Works with any prime/zoom lens
- Rubber material
- Pitch of 0.8
- Maximum lens diameter of 10.5 cm
- Length 33.0 cm approx.
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$99.95
Lanparte Extendable 15mm Aluminum Rod (Pair, 3.9")
High-precision rods that can be attached to a second pair of rods
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$59.95
Lanparte Extendable 15mm Aluminum Rod (Pair, 7.9")
High-precision rods that can be attached to a second pair of rods
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$64.95
Lanparte Extendable 15mm Aluminum Rod (Pair, 11.8")
High-precision rods that can be attached to a second pair of rods
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$68.95
Lanparte ARRI Rosette with Threaded Hole
Designed to connect to an EVF mount or handgrip
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$14.95
Lanparte Dual Rod Clamp with Rosettes
15mm Rod Compatible, ARRI Standard Rosette Adapters
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$99.95
Lanparte Single Rod Clamp with 1/4" Mount
Mounting solution that clamps onto a 15mm rod
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$41.95
Lanparte Basic Handle for 15mm Rod (Pair)
Enables dual handgrip support with 15mm rod support rigs
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$189.00
Lanparte Basic Cage for the Blackmagic Studio Camera
Compact cage with 15mm rods designed for the Blackmagic Studio Camera
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$989.00
Lanparte CA-01 C-Shaped Support Arm
Designed to be the framework for all the camera rig components
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$299.00
Lanparte CC-01 15mm Single Mount Cable Clamp
Compact rod mount made of rugged, anodised aluminium
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$44.95
Lanparte Carbon Fiber 15mm Rods (Pair, 7.9")
Pair of standard 15mm rods made of full carbon fibre
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$94.95
Lanparte Carbon Fiber 15mm Rods (Pair, 350mm)
Pair of standard 15mm rods made of full carbon fibre
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Lanparte Chest Pad
Designed for comfortable shooting while holding your camera rig stable
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$289.00
Lanparte Canon C300/C100 DC Power Cable for Battery Pinch
Supplies power to a Canon C300 or C100 Cinema Camera
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$34.95
Lanparte 4-Pin Female XLR 12 VDC Power Adapter Cable for Battery Pinch
Allows you to power any 12 VDC device with a 4-pin XLR connector
In stock
Ships Monday
$37.95
You Pay:
$17.00
$37.95
Lanparte Double 15mm Rod Clamp with 1/4" Screw
Mounts on any equipment featuring a 15mm rod system
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$55.95
Lanparte D-Tap Power Cable for Blackmagic Pocket Camera
D-Tap to 2.5mm Right-Angle DC Connector, 24" Long
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$36.95
Lanparte D-Tap to 4-Pin XLR Power Adapter Cable
D-Tap to 4-Pin XLR Connector, 25" Long
In stock
Ships Monday
You Pay:
$36.95
Lanparte LANC Start / Stop Controller for Blackmagic Cameras
LANC Start / Stop Controller for select Blackmagic Cameras
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$139.00
Lanparte Double 15mm Rod Clamp with ARRI Rosette Lock
Compatible with 15mm standard rods, Steel lock, CNC machined
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Lanparte 0.5 Pitch Gear Mod for FF-01 / FF-02 Follow Focus Units (70 Teeth)
Replacement 0.5 mod gear featuring 70 teeth
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte Reversing Gear for Follow Focus
Mod 0.8 reversing gear for Nikon and similar lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$149.00
Lanparte Height Raiser Clamp
Clamp which holds two pairs of standard 15 mm rods
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$88.95
Lanparte ARRI Rosette with Un-Threaded Hole
Designed to connect to an EVF mount or handgrip
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$13.95
Lanparte Carbon Fiber 15mm Rods (Pair, 11.8")
Pair of standard 15mm rods made of full carbon fibre
Usually ships in 2 - 3 weeks
You Pay:
$129.00
Lanparte Carbon Fiber 15mm Rods (Pair, 17.7")
Pair of standard 15mm rods made of full carbon fibre
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Lanparte D-Tap to DC Power Cable for Blackmagic Camera 24"
Allows you to directly power your 2.5K or 4K Blackmagic camera
In stock
Ships Monday
You Pay:
$20.95
You Pay:
$23.95
Lanparte Rod Clamp with Hot Shoe Mount
Hot shoe mount connects to camera, Made by CNC machine
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$63.95
Lanparte Rod Extension Screw (Single)
Enable you to lengthen your rig track
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$19.95
Lanparte Starter DSLR Camera Rig Kit
15mm Rod Shoulder-Mount Rig for DSLRs, Height Adjustable Bridge Plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,729.00
Lanparte Double Handle DSLR Camera Rig Kit
15mm-Rod Shoulder-Mount Rig for DSLRs, Quick-Release Baseplate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,419.00
Lanparte Shoulder Support for DSLR Camera Rig
15mm LWS Compatible, Arced Shoulder Pad, Offset Bracket
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$339.00
Lanparte Universal Grip V2 for 19mm Rods
For 15mm LWS & 19mm Studio Rods, Steel Spindle Joint Locking System
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$839.00
Lanparte Top Handle for 15mm Rods
Dual 15mm Rod clamp, Non-Slip Silica-Gel Grip
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$189.00
Lanparte GoPro HERO5 Clamp for LA3D & LA3D-2 Handheld Gimbals
Available to order today
In stock
Ships Monday
$38.95
You Pay:
$1.00
$38.95
Lanparte GoPro HERO5 Clamp for LA3D-S & LA3D-S2 Handheld Gimbals
- For LA3D-S & LA3D-S2 Handheld Gimbals
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$59.95
Lanparte FANS Series Cage Kit for Sony a7 Series
- Dedicated Cage with Camera Adapter Plate
- 20.3 cm ARRI-Standard Dovetail Plate
- Fits ARRI-Standard 19mm Bridgeplates
- Baseplate with 15mm LWS Rod Support
- Dual 30.5 cm, 15mm Rods
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$995.00
Lanparte FANS Series Cage for Sony a7 Series
- Dedicated Cage with Camera Adapter Plate
- NATO Rail Top Handle
- 1/4"-20 Accessory Adapter
- Shoe Mount
- 15mm Rod Port
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$609.00
Lanparte ARRI Standard Bottom Dovetail Plate (12")
- Fits All ARRI Standard Bridge Plates
- 1/4"-20 and 3/8"-16 Threads
- Stopper Screw
- Safety Latch
- Scratch Resistant
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$839.00
Lanparte ARRI Standard Bottom Dovetail Plate (18")
- Fits All ARRI Standard Bridge Plates
- 1/4"-20 and 3/8"-16 Threads
- Stopper Screw
- Safety Latch
- Scratch Resistant
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,049.00
LanParte FANS Series Camera Shoulder Rig
- Supports ARRI-Standard 19mm Bridgeplates
- Rosette-Adjustable Handgrips
- Forward/Backward-Adjustable Shoulder Pad
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,299.00