Wooden Camera Handgrip Trigger Box for RED DSMC1/DSMC2 V-Lock Expander and Jetpacks
- Add Handgrip Start/Stop Functionality
- For RED DSMC2 Cameras
- Use with Wooden Right or Left Handgrip
- 3-Pin Fischer to 4-Pin LEMO-Type Cable
- Works with Jetpack/Jetpack-SDI Expanders
Email me when stock arrives
- Product: #76856
- SKU: 54.230709
Wooden Camera Handgrip Trigger Box 00 LEMO for RED DSMC1 and DSMC2 cameras attaches to the Wooden Handgrip (Right) and (Left) to add start/stop functionality for the RED standard 00 LEMO cameras utilizing a LEMO compatible connector. The same control box works with both the Left and the Right grip. Simply remove the captured M3 screws and insert them from the opposite side.
Before purchase, verify that you have selected the correct option for your configuration.
The DMSC2 Base Expander and DSMC1 option will work with: (D-Tap power source is required so the internal board can provide 5V to the camera to start and stop recording) -DSMC2 Base Expander -DSMC1 Cameras
The RED DSMC2 V-Lock Expander and Jetpacks option will work with: -DSMC2 Jetpack Expander -DSMC2 Jetpack-SDI Expander -DSMC2 V-Lock I/O Expander
Special Note: If you own the Wooden Camera B-Box, you should instead choose Wooden Camera Handgrip Trigger Box BNC (RED Epic/Scarlet/Weapon/Epic-W/Scarlet-W/Raven), which is the BNC connector version of this system.
Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.
|Dimensions||6 x 5 x 6" / 15.2 x 12.7 x 15.2 cm|
|Weight||6.4 oz / 181.4 g|