Wooden Camera D-Box for Canon C300 Mark II (V-Mount)
Features
- Power distribution
- Standardised remote start/stop
- Hot-swap abilities
- For Canon C300 Mark II
Description
D-Box (Canon C200, C200B, C300mkII, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardised remote start/stop, and hot swap abilities for the Canon C200, C200B, C300mkII. Two 12 inch (30cm) cables exit the power plate with one going to the 4pin LEMO compatible power plug and the other going to the Remote port. There is a LANC control board inside the D-Box which communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port.
The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to our Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system, use the Battery Slide or Recorder Slide paired with the same Rod Clamps listed above.
Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.
Features:
Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) and is hard wired to the D-Box. Inside the D-Box is a 10A fuse.
D-Box Slots Included:
- D-Tap - 12V Unregulated
- This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO
- 2 pin LEMO - 12V Unregulated
- ARRI standard wiring
- This slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)
- 2 pin LEMO - 12V Unregulated
- ARRI standard wiring
- This slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)
- 3 pin Fischer - 24V Regulated
- Regulator built in to convert battery voltage to 24V
- Maximum 3A shared between slot 4/5
- Note this slot is not swappable
- 3 pin Fischer - 24V Regulated
- Regulator built in to convert battery voltage to 24V
- Maximum 3A shared between slot 4/5
- Note this slot is not swappable
- 4 pin Mini XLR - 12V Input
- Hot swappable power input with included 8 inch pigtail cable for standard 4 pin XLR (12V nominal)
- Capable of providing power to accessories and camera without brick battery attached
- Note this slot is not swappable
Specifications
| General | |
| Product Type | Power distribution panel |
| Width | 8.9 cm |
| Depth | 4.3 cm |
| Height | 14.5 cm |
| Weight | 534 g |
| Power Device | |
| Voltage Provided | 12 / 24 V |
| Output Connectors | 4 pin mini XLR, D-tap, 2 pin Lemo, 3 pin Fisher |
| Max Electric Current | 10 A |
| Output Details | D-tap - 12 V 2 x 2 pin Lemo - 12 V 2 x 3 pin Fisher - 24 V - 3 A 4 pin mini XLR - 12 V |
| AC Power Adapter Required | Yes |
| Features | Integrated fuse, remote start/stop function |
| Miscellaneous | |
| Included Accessories | Allen key, screws |
| Cables Included | miniXLR to XLR cable - 8 in 2 x power cable - 1 ft |
| Compatibility Information | |
| Designed for | Canon EOS C300 Mark II |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Wooden Camera D-Box for Canon C300 Mark II (V-Mount)
- Manufacturer: Wooden Camera
- Model: 215800
- SKU: 215800
- RM Product #: 50131
- Compatible With: Canon C300 Mark II
- Warranty: 1 year manufacturer warranty
Recently Viewed
View AllWooden Camera D-Box for Canon C300 Mark II (V-Mount)
