Yamaha DXR10MKII 1100W 10" Powered Speaker
Features
- Bass-Reflex ABS Cabinet
- 10" Woofer
- 1.75" Compression Tweeter
- H x V: 90° x 60°
- Biamplified Class-D Design
Description
You'll be amazed at the sonic clarity and depth you get from the Yamaha DXR10MKII 1100W 10" Powered Speaker, part of their DXR/DXS line of Class D–powered PA speakers. Housed in durable, compact ABS enclosures, the 10" DXR10mkII 2-way speakers represent Yamaha's latest sound reinforcement technology. While they're ready for duty as part of a full-scale stage rig, DXR10mkII speakers pack maximum performance into an efficient design that's also perfect for gigging musicians. And thanks to the built-in 3-channel mixer, the DXR10mkII is perfect for those times when you need sound reinforcement but don't need an entire PA system. Whether you're playing pre-recorded music or performing for a crowd, you'll love the transparent sound of Yamaha's DXR10mkII powered loudspeakers.
Key Features:
Consistent clarity and balance at any volume
While any loudspeaker's tonal balance can vary depending on its output level, the DXR10mkII features Yamaha's D-Contour intelligent multiband compressor to maintain its sonic integrity at any volume. D-Contour constantly monitors multiple frequency bands, and makes real-time adjustments to keep the balance consistent — it won't mess with your mix, it just ensures your mix stays the same at any volume level. And live sound engineers appreciate the flexibility to choose from two operational modes (FOH/Main or Monitor) to optimise the frequency balance depending on your application.
Full and detailed imaging thanks to advanced FIR-X tuning
Many loudspeakers exhibit a loss of clarity and/or volume in frequencies near their crossover points, but the Yamaha DXR10mkII maintains clear sound thanks to advanced FIR-X crossover tuning. Utilising ultra-precise 48-bit DSP, FIR-X optimises frequencies and phase relationships to practically eliminate crossover distortion. The result is a smooth, balanced response around the crossover frequencies and a better-sounding performance overall.
Built-in 3-channel mixer
While multiple DXR10mkII powered loudspeakers make a great sound system — especially when paired with a Yamaha DXS subwoofer — what about those situations where you just need a little bit of reinforcement without an entire sound system? Just turn the DXR10mkII around, and connect up to three microphones or line-level signals for instant amplification. The versatile nature of the DXR10mkII makes it the ideal loudspeaker for solo musicians, as well as schools and houses of worship that need a flexible sound system for multiple applications.
- High-powered portable loudspeaker with multi-use flexibility
- 10" speaker, powered by 1,100 watts of peak power in a 2-way design
- Built-in 3-channel mixer lets you connect microphones or line-level sources directly without an entire PA system
- Built-in DSP for phase optimisation and transparent dynamic control
- ABS cabinet is durable, with a low-resonance design for maximum sound quality
Specifications
PA Speaker | |
Configuration | Active 2-Way |
Enclosure Type | Bass-Reflex Loudspeaker |
Total Power Capacity | 1100 W Peak |
700 W RMS | |
Amplifier Power Rating | LF: 950 W Peak |
600 W RMS | |
HF:150 W Peak | |
100 W RMS | |
Amplifier Class | Class-D |
Drivers | |
HF Driver | 1 x 1.75" / 44.45 mm Compression Driver with 1" / 25 mm Throat |
LF Driver | 1 x 10" / 25.4 cm Woofer |
LF Voice Coil | 2" / 5.08 cm |
Magnet | HF: Neodymium |
LF: Ferrite | |
Performance | |
Frequency Range | 56 Hz to 20 kHz -10 dB |
Maximum SPL | 132 dB SPL |
Coverage Angle | 90° H x 60° V (Horn) |
Input Sensitivity | Line Input: +1 dBu (Max) |
Mic Input: -32 dBu (Max) | |
Line Input: -13 dBu (Max) | |
Mic Input: -22 dBu (Center) | |
Line Input: +11 dBu (Center) | |
Line Input: -3 dBu (Center) | |
Max Input Level | Line Input: +24 dBu (Balanced) |
Mic Input: +20 dBu (Balanced) | |
Line Input: +16 dBu (Unbalanced) | |
I/O Impedance | XLR Mic Input: 12 Kilohms (Balanced, Mono) |
XLR Line Input: 8 Kilohms (Balanced, Mono) | |
1/4" TRS Line Input: 40 Kilohms (Unbalanced, Stereo); 20 Kilohms (Unbalanced, Mono) | |
Protections | AC Coupling, Crossover Overload, DC Fault |
Connectivity | |
Audio I/O | 1 x XLR 3-Pin Input |
2 x 1/4" TS Input | |
2 x RCA Input | |
1 x XLR 3-Pin Thru | |
1 x XLR 3-Pin Link Output | |
Signal Processing | |
Crossover | 2.3 kHz |
Filters | 2 x High-Pass: 100 Hz, 24 dB/Octave |
120 Hz, 24 dB/Octave | |
Dynamic Processing | Compression, Multiband Limiter |
Digital Signal Processing | 48-Bit DSP: FIR Filter, Venue Settings |
Max Sample Rate/Resolution | 48 kHz / 24-Bit |
Power | |
AC Input Power | |
Universal | 100 to 240 VAC, 50 / 60 Hz |
AC Power Connector | 1 x IEC Input |
Power Consumption | 90 W |
Physical | |
Mounting | 2 x M8 (Top) |
1 x M8 (Rear) | |
1 x 1.38" / 35 mm Pole Socket (Dual Angle) | |
Monitor Angle | 50° |
Handles | 1 x Top |
Cooling | Fan (Variable Speed) |
Construction Material | ABS |
Dimensions | 305 x 502 x 310 mm |
Weight | 13.9 kg |
In The Box
- Yamaha DXR10MKII 1100W 10" Powered Speaker
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Yamaha DXR10MKII 1100W 10" Powered Speaker
- Manufacturer: Yamaha
- Model: DXR10MKII
- SKU: DXR10MKII
- RM Product #: 89684
- Warranty: Click here for warranty terms view terms