Yamaha DZR12 2000W 12 inch Powered Speaker
Features
- For Live Stage, Theatre, DJ Setups
- Designed for FOH/Main & Floor Monitors
- LF: 12" and HF: 2"
- Max SPL: 139 dB
- Frequency Range: 39 Hz to 20 kHz (-10 dB)
Description
The Yamaha DZR12 2000W 12 inch Powered Speaker offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 39Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimised presets and an intuitive LCD display make dialling in your settings a piece of cake. As a powered PA speaker, the DZR12 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR12 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.
Key Features
- 2-way powered loudspeaker with 2" HF and 12" LF drivers
- Boasts a high-power 2,000-watt Class D amplifier and 39Hz–20kHz frequency range
- Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimise phase distortion
- D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
- FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application
- DSP protection safeguards your power supply, power amplifiers, and transducers against damage
- Optimised factory presets and intuitive LCD screen make operation easy
- Great-sounding, custom-designed transducers
- Rotatable horn allows vertical or horizontal mounting
- 90x60° dispersion from a vertical position
- Constant directivity horn supplies smooth, level coverage without roll-off
- Universal switching mode power supply offers maximum power, along with stable, worry-free operation
- Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating
Sophisticated DSP processing
Yamaha's Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimise phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR12 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR12's sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR12 remains easy to use, thanks to optimised factory presets and an intuitive LCD screen.
Custom-designed transducers
The Yamaha DZR12 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminium-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminium frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR12 delivers. The DZR12 isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.
Smart, ultra-flexible design
The DZR12 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90x60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR12's constant directivity horn — its innovative design minimises the roll-off that conventional horns often produce.
High-power Class D amplifier
Loaded with 2,000 watts of Class D power, the Yamaha DZR12 is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR12 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimised to match the DZR12's transducers, ensuring top-tier sound quality.
Specifications
PA Speaker | |
Configuration | Active 2-Way |
Enclosure Type | Bass-Reflex Loudspeaker |
Total Power Capacity | 2000 W Peak |
950 W RMS | |
Amplifier Power Rating | LF: 1000 W Peak |
850 W RMS | |
HF: 1000 W Peak | |
100 W RMS | |
Amplifier Class | Class-D |
Drivers | |
HF Driver | 1 x Rotatable Horn Titanium Compression Driver with 1" / 25.4 mm Throat |
HF Voice Coil | 2" / 50.8 mm |
LF Driver | 1 x 12" / 30.5 cm Woofer |
LF Voice Coil | 3" / 76.2 mm |
Magnet | HF: Neodymium |
LF: Neodymium | |
Performance | |
Frequency Range | 39 Hz to 20 kHz -10 dB |
Maximum SPL | 139 dB |
Coverage Angle | 90° H x 60° V (Rotatable Horn) |
60° H x 90° V (Monitor) | |
Max Input Level | Line Input: +24 dBu |
I/O Impedance | Input: 20 Kilohms |
Connectivity | |
Audio I/O | 2 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input |
2 x XLR 3-Pin Male Balanced Output | |
USB | 1 x USB Type-A (External Memory, Host Connection) |
Signal Processing | |
Crossover | 1.8 kHz |
Max Sample Rate/Resolution | 96 kHz |
Power | |
AC Input Power | Universal: 100 to 240 VAC, 50 / 60 Hz |
AC Power Connector | 1 x IEC (Locking) |
Power Consumption | 45 W (Idle) |
150 W (1/8 Power) | |
Physical | |
Mounting | 12 x M10 Fly Point |
2 x 1.4" / 35 mm Pole Socket (Dual Angle, Bottom) | |
Monitor Angle | 50° |
Handles | 1 x Each Side |
Cooling | Fan (Variable Speed) |
Construction Material | Plywood |
Dimensions | 410 x 646 x 394 mm |
Weight | 21.4 kg |
In The Box
- Yamaha DZR12 2000W 12 inch Powered Speaker
- Power Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Yamaha DZR12 2000W 12 inch Powered Speaker
- Manufacturer: Yamaha
- Model: DZR12
- SKU: DZR12
- RM Product #: 89732
- Warranty: Click here for warranty terms view terms