Yamaha TF3 Digital Mixing Console

Name: Yamaha TF3 Digital Mixing Console
Brand: Yamaha
SKU: TF3
Price: 6199.00 NZD
Availability: BackOrder

Product #35136 | SKU TF3 | Yamaha

| Write a review

Our Price $6,199^.00

This product can't be purchased at this time, please contact us for more information.

Email me when stock arrives

Request price match

Talk to our experts

Features

Touchscreen & 25 Motorised Faders
24 Analogue XLR/TRS Combo Mic/Line Inputs
2 Analogue RCA Pin Stereo Line Inputs
16 Analogue XLR Outputs
Per-Channel AEQ /Comp & 8 FX Processors

Description | Specifications | In The Box

Description

The Yamaha TF3 is a rack-mountable digital audio mixing console that features a touchscreen display, 25 motorised faders, and is expandable up to 48 input channels by adding the optional Tio1608-D I/O rack. Ideal for a multitude of live sound reinforcement scenarios, the TF3 can also be used for live recording, offering 34 x 34 channel digital recording and playback via USB 2.0 using a computer and your preferred DAW software, and 2 x 2 channel recording and playback using any USB storage device.

The TF3 console itself provides 24 analogue XLR/TRS combo mic/line inputs with 48V phantom power, as well as 2 analogue RCA stereo line inputs, and 16 analogue XLR outputs. Each combo input channel features a recallable D-PRE microphone preamp, as well AEQ and two dynamics processors. In addition, the console offers eight powerful FX processors with patches ranging from reverb and delay, to modulation effects such as flanger and chorus, to utility processing like 3-band multi-band compression. The TF3 ships with Steinberg's Nuendo Live for advanced multi-tracking and virtual sound cheque capabilities.

Features

25 motor faders (24 channels + 1 master)
48 input mixing channels (40 mono + 2 stereo + 2 return)
20 Aux (8 mono + 6 stereo) + Stereo + Sub buses
8 DCA groups with Roll-out
24 analogue XLR/TRS combo mic/line inputs + 2 analogue RCA pin stereo line inputs
16 analogue XLR outputs
34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
Download information for CUBASE AI DAW software
Optional rackmount kit
1 expansion slot for optional NY64-D Dante audio interface card
Optional Tio1608-D Dante equipped I/O rack with 16 microphone/line inputs and 8 line outputs

Specifications


Faders	25
Mixer	Input Channels: 48 (40 mono + 2 stereo + 2 return) Aux Buses: 20 (8 mono + 6 stereo) Stereo Buses: 1 Sub Buses: 1 Input Channel Functions: 8 DCA Groups
I/O	Inputs: 24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) Outputs: 16 (XLR) Expansion Slots: 1
DSP	8 effects + 10 GEQ
USB	34 x 34 USB audio interface, 2-track recording via USB storage device
Sampling Frequency	48 kHz, internal
Signal Delay	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Faders	100 mm motorised, resolution = 10-bit, +10 to -138 dB, -∞ dB all faders
Total Harmonic Distortion	Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 ohms, INPUT to OMNI OUT, input gain = min. (measured with a -18 dB/octave filter @ 80 kHz)
Frequency Response	+0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OMNI OUT
Dynamic Range	110 dB typ., DA convertor, 107 dB typ., INPUT to OMNI OUT, input gain = min
Noise	Equivalent Input Noise:-128 dBu typ., input gain = max. (measured with an A-weight filter) Residual output noise:-85 dBu, ST master off (measured with an A-weight filter)
Crosstalk	-100 dB (measured with a -30 dB/octave filter @ 22 kHz), adjacent INPUT/OMNI OUT channels, input gain = min
Power Requirements	100 - 240 V 50/60 Hz
Power Consumption	110 W
Analogue Inputs	Input Terminals: INPUT 1-24, ST IN 1,2 GAIN: -6 dB / +66 dB (INPUT 1-24) Load Impedance: 7.5 kOhms (INPUT 1-24); 10 kOhms (ST IN 1,2) For Use With Nominal: 50 - 600 ohm mics or 600 ohm lines (INPUT 1-24); 600 ohm lines (ST IN 1,2) Sensitivity: -82 dBu (61.6 V), -10 dBu (245 mV) (INPUT 1-24); -30 dBV (31.6 V) (ST IN 1,2) Nominal: -62 dBu (0.616 mV), +10 dBu (2.45 V) (INPUT 1-24); -10 dBV (316 mV) (INPUT 1-24) Max. Before Clip: -42 dBu (6.16 mV), +30 dBu (24.5 V) (INPUT 1-24); +10 dBV (3.16 V) (ST IN 1,2) Connector: Combo Jack (XLR-3-31 type or TRS phone) balanced (INPUT 1-24); RCA pin jack unbalanced (ST IN 1,2)
Analogue Outputs	Output Terminals: OMNI OUT 1-16, PHONES Source Impedance: 75 ohms (OMNI OUT 1-16); 100 ohms (PHONES) For Use With Nominal: 600 ohm lines (OMNI OUT 1-16); 40 ohms (PHONES) GAIN SW: +24 dBu position (default) (OMNI OUT 1-16) Nominal Output Level: +4 dBu (1.23 V) (OMNI OUT 1-16); 3 mW (PHONES) Max. Output Level Before Clip: +24 dBu (12.3 V) (OMNI OUT 1-16); 75 mW (PHONES) Connector: XLR-3-32 type balanced (OMNI OUT 1-16); stereo phone jack (TRS) unbalanced (PHONES)
Digital Input/Output	Terminals: USB (TO HOST), iPad Format: USB Data length 24-bit (USB TO HOST) Audio: 34 ch input / 34 ch output, PCM (USB TO HOST); Playback: MP3 or WAV file data / Record: WAV file data (iPad) Connector: USB (B type) (USB TO HOST); USB (A type) (iPad)
Control I/O	Terminals: NETWORK, FOOT SW Format:IEEE802.3 (NETWORK) Level: 10BASE-T/100Base-TX (NETWORK) Connector: RJ-45 (NETWORK); TS Phone (FOOT SW )
Dimensions	716 x 225 x 599 mm
Nett Weight	7 kg