dB Technologies VIO S118R Line Array Subwoofer
Features
- Active 1×18″ bass reflex subwoofer.
- Last generation digipro G4 AMP technology.
- 1600 W RMS SMPS amplifier with PFC.
- System auto-test for quick diagnostics.
- Designed for maximum efficiency in the lower end.
- ON Board delay for quick time alignment operations.
- ON Board cardioid array configuration preset.
- Modular slot for network and digital audio expansion cards.
Description
With a Digipro G4® 1600W Class D amplifier driving its acoustic engine, the dB Technologies VIO S118R Line Array Subwoofer completes the impressive low-end VIO line array system. Digipro G4® is equipped the Power Factor Correction (PFC) and SMPS for higher resistance to line voltage fluctuations, as well a slot module with an RDNet expansion card to monitor and control the system via Aurora Net. This slot is also capable of digital audio network integration via Audinate Dante™ Expansion Card (sold separately). Run real-time tests on electronics and transducers directly on the amp module or remotely with Aurora Net. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary. Achieve the best possible cancellation on the rear side automatically with the on-board cardioid preset that processes the backward sub in inverted stack cardioid configurations for advanced settings.
Specifications
| Acoustical data | ||
| Frequency Response [- 6 dB] | 35 Hz to Cut Freq (X-Over Dependent) | |
| Frequency Response [- 10 dB] | 32 Hz | |
| Max SPL | 139 dB | |
| LF | 1x18" | |
| Voice Coil LF | 4" | |
| Directivity | Omnidirectional | |
| Amplifier | ||
| Amp Technology | Digipro G4 | |
| Amp Class | Class D | |
| RMS Power | 1600 W | |
| Peak Power | 3200 W | |
| Cooling | Convection + Internal Fan | |
| Power Supply | Full-range PSU with PFC | |
| Processor | ||
| Controller | DSP 32 Bit | |
| AD/DA Converter | 24 bit 96 kHz | |
| Limiter | RMS, Peak, Thermal | |
| Delay Option | 0- 9.9 ms | steps of 0.1 ms [on-board], 0 - 62 ms [via RDNet] |
| Crossover Frequency LF-HF | Selectable 60-110Hz + Full range | |
| LF-Xover out slope | 24 dB/Octave | |
| Input | ||
| Signal Input | 1xXLR balanced | |
| Signal Output | 1x XLR balanced (link or X-over) | |
| 1xRJ | 45 LINK (RDNet) | |
| Expansion Card | RDNet Card (1x RJ45 IN 1x RJ45 Link) [included], Dante card [optional] | |
| Mains Connections | 1x PowerCON TRUE1 In, 1x PowerCON TRUE1 Out | |
| Controls | 1x Input Attenuation Rotary Switch, 1x Rotary Encoder (Delay 9.9 ms), 1x Polarity Inversion Switch (0° or 180°), 1x Cardioid Mode Switch, 1x X-Over Freq Switch (60-110 Hz + Full Range, 1x System Auto-test | |
| Mechanics | ||
| Housing | Multiplex plywood, Polyurea painted | |
| Handles | 2x Per Side, Aluminium | |
| Pole Mount | M20 Thread | |
| Raincover | Included | |
| Width | 720 mm (28.34 in) | |
| Height | 520 mm (20.47 in) | |
| Depth | 695 mm (27.36 in) | |
| Weight | 47 kg (103.62 lbs) |
In The Box
- dB Technologies VIO S118R Line Array Subwoofer.
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: dB Technologies VIO S118R Line Array Subwoofer
- Manufacturer: dB Technologies
- Model: 1030102780
- SKU: 1030102780
- RM Product #: 70146
Recently Viewed
View AlldB Technologies VIO S118R Line Array Subwoofer
