dB Technologies VIO S318 Active Subwoofer Line Array has been discontinued, here are some related products you might like:
dB Technologies VIO S318 Active Subwoofer Line Array
Overview
Description
The VIO series is completed by VIO S318 subwoofer, a one of a kind system both for its acoustic configuration and majestic output. Indeed, dBTechnologies succeded in designing an extraordinary powerful triple 18” woofer system while maximizing its frontal emission and extending lower frequencies.
Vio S318 is equipped with 3 18” bassreflex half-horn loaded woofers, configured in order to maximize frontal emission. The 3 voice coils are in facts mechanically aligned in order to achieve a perfect phase response.
The 3 DIGIPRO G3 amplifiers deliver a total 2700 W RMS power, allowing the system to reach up to 143dB SPL.
The system features an integrated delay module achieving up to 9.9 ms delay with 0,5 ms steps. The crossover module sets the low pass filter alongside with the highpass filter for the integrated crossover output. The system also features an attenuation control, a polarity switch and a RDnet port for remote control.
The high quality multiplex housing is reinforced with a robust polyurea finishing and equipped with 5 aluminium handles per side.
The dolly transport DT-318 allows to transport up to 3 subs simoultaneously, both on wheels or on lift track. As an alternative to the dolly, wheels can be mounted on the rear side of the cabinet.
Features
- Designed to maximize in-phase frontal emission
- On-board delay for perfect time alignement
- On board cardioid array configuration preset
- Frequency range extending down to 35Hz
- Network ready with an integrated RDNet port
- Active tri-amped 3x 18” bassreflex semi-horn loaded subwoofer
- Polyurea painting on a road-resistant wooden enclosure
Applications
- Large live sound applications
- Permanent installation in theatres, houses of worship, convention centres
- Portable PA, retail, clubs, ballrooms, houses of worship, corporate AV, live theatres
Specifications
| Technical Data | |
| Speaker Type | Active Bassreflex Semi-Horn-Loaded Subwoofer |
| Acoustical data | |
| Frequency Response [- 6 dB] | 39 Hz to Cut Freq (X-Over Dependent) |
| Frequency Response [- 10 dB] | 35 Hz (HPF) |
| Max SPL | 143 dB |
| LF | 3x18" |
| Voice Coil LF | 4 " |
| Directivity | Omnidirectional |
| Amplifier | |
| Amp Technology | Digipro® G3 |
| Amp Class | Class D |
| RMS Power | 2700 W |
| Peak Power | 5400 W |
| Cooling | Convection |
| Power Supply | 2700 W SMPS with Auto Range PSU |
| Processor | |
| Controller | DSP 64 bit |
| AD/DA Converter | 24 bit/48 KHz |
| Limiter | RMS, Peak, Thermal |
| Delay Option | 0-9.9 ms internal Steps of 0.1 ms |
| Crossover Frequency LF-HF | 70-105Hz + Full range |
| LF-Xover out slope | 24 dB/Octave |
| Input | |
| Signal Input | 1 x XLR balanced 1 x RJ45 LINK (RDNet) |
| Signal Output | 1 x XLR balanced 1 x RJ45 LINK (RDNet) |
| Power Socket | 1 x PowerCON TRUE1 IN 1 x PowerCON TRUE1 OUT |
| Controls | 1 x Input Attenuation Rotary Switch 2 x Rotary Encoder (Delay 9.9 ms) 1 x Polarity Inversion Switch (0° or 180°) 1 x Cardioid Mode Switch 1 x X-Over Freq Switch (70-105 Hz + Full Range (steps of 5 Hz) |
| Mechanics | |
| Housing | Multiplex plywood Polyurea painted |
| Handles | 4 x Per Side Aluminium |
| Raincover | Included |
| Rigging Points | 2 x Pick Points on top to fix DRK-210 rigging frame |
| Width | 1300 mm (51.18 in) |
| Height | 520 mm (20.47 in) |
| Depth | 800 mm (31.5 in) |
| Weight | 103.9 kg (229.06 lbs) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: dB Technologies VIO S318 Active Subwoofer Line Array
- Manufacturer: dB Technologies
- Model: 1030102440
- SKU: 1030102440
- RM Product #: 50547
Recently Viewed
View AlldB Technologies VIO S318 Active Subwoofer Line Array
