iConnectivity iConnectAudio 2+ USB Audio and MIDI Interface
Features
- 2 Inputs / 6 Outputs.
- Configurable Audio Paths.
- Phantom Power.
- MIDI I/O with Advanced MIDI Connectivity.
- Supports Dual Computers.
Description
The iConnectivity iConnectAudio 2+ USB Audio and MIDI Interface is a two-input, six-output audio and MIDI interface for musicians and DJs. It features two combination microphone/line/instrument inputs and three pairs of independent stereo outputs, perfect for DJ and electronic music applications. Configurable audio paths allow for routing, combining, and monitoring signals as needed, while advanced MIDI connectivity, routing, and management solve common connection challenges between MIDI gear and computing devices.
Simultaneous support for two computer devices with full Mac, Windows and iOS compatibility, and the ability to pass audio and MIDI from one to another, opens up multiple creative options for solo or collaborative ventures. One plug brings an iPad into the workflow, or maybe another musician's computer. Just use the software patchbay and everyone's talking audio and MIDI. Route MIDI and audio everywhere and sync everything without cables. The unit is USB bus powered, but can also be powered via an optional external universal power supply that will also power an iPad if part of the setup.
Key Features:
- Two combination microphone/line/instrument inputs.
- Three pairs of independent stereo outputs perfect for DJ and electronic music applications.
- Configurable audio paths.
- 1/4" stereo headphone output with independent mix.
- MIDI input and output.
- Advanced MIDI connectivity, routing, and management solve the connection challenges between MIDI gear and computing devices.
- Supports two computer devices simultaneously with multi-host device ports for connecting one or two Mac/Windows computers, or one computer plus an iPad.
- Up to ten channels of bi-directional digital audio on each of the two device ports, and includes Audio passThru capability from one computer to another.
- Individual +48V phantom power toggle and line/instrument mode selection.
- iConfig software (Mac, Windows, iPad) for easy audio mixing/routing, and MIDI routing/processing with setups stored in flash memory on the device.
- Onboard audio mixer/patchbay.
- Interactive display for touch control of all input/output levels and +48V phantom power and line/instrument mode.
- USB bus-powered, or use the optional power supply (sold separately) to charge an iPad as well.
- USB audio and MIDI Class-Compliant.
Specifications
Interface | |
Max Sample Rate/Resolution | 96 kHz / 24-Bit |
Connectivity | |
Host Connection | 2 x USB Type-B (USB 2.0) Lightning |
Analogue I/O | 2 x Combo XLR / 1/4" Mic/Line Input 4 x 1/4" (6.3 mm) TRS Line Output 1 x 1/4" (6.3 mm) TRS Headphone Output |
Phantom Power | +48 V (Selectable on Individual Inputs) |
Digital I/O | * None |
MIDI I/O | 1 x 5-Pin MIDI In 1 x 5-Pin MIDI Out |
Performance | |
Frequency Response | Headphone Outputs: 20 Hz to 20 kHz ±0.1 dB Line Outputs: 20 Hz to 20 kHz ±0.1 dB Mic Inputs: 20 Hz to 20 kHz |
Gain Range | Mic Inputs: 0 to 60 dB |
Max Input Level | Line/Hi-Z Inputs: +20 dBu +18 dBV |
Max Output Level | Line Outputs: +12 dBu +9.8 dBV |
Headphone Output Power | 34 mW per Channel into 30 Ohms |
Dynamic Range | A/D Convertors: 102 dB D/A Convertors: 104 dB |
Impedance | Hi-Z Inputs: 800 kOhms Line Inputs: 45 kOhms |
THD+N | Line/Hi-Z Inputs: -88 dBA Line Outputs: -98 dBA Mic Inputs: -90 dBA Headphone Outputs: -99 dBA |
SNR | Line/Hi-Z Inputs: 104 dBA Line Outputs: 98 dBA Mic Inputs: 104 dBA Headphone Outputs: 100 dBA |
Digital Audio | |
Sample Rates | 44.1, 48, 88.2, and 96 kHz |
Bit Depth | 24-Bit |
Compatibility | |
OS Compatibility | Windows 7 or Later iOS 6.0 or Later macOS 10.8 or LaterUnit can be used with macOS 10.4, however configuration of the device with iConfig is limited to macOS 10.6 (64-bit) or Later. |
Power | |
Power Requirements | AC/DC Power Adapter (Not Included), USB Bus-Power |
AC/DC Power Adapter | 9 V (Not Included) |
Physical | |
Dimensions | 8.4 x 5.5 x 1.5" / 214 x 140 x 37 mm |
Weight | 2.1 lb / 965.0 g |
In The Box
- iConnectivity iConnectAudio 2+ USB Audio and MIDI Interface
- USB Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: iConnectivity iConnectAudio 2+ USB Audio and MIDI Interface
- Manufacturer: iConnectivity
- Model: ICAUDIO-02
- SKU: ICAUDIO-02
- RM Product #: 61759