sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)
Features
- Cardioid Polar Pattern
- Matched Pair for Stereo Recordings
- Gold-Sputtered, Small-Diaphragm Capsule
- Transformerless Design for Transparency
Description
Designed for stereo recording, the sE Electronics sE8 Matched Pair gives you two sE8 microphones in one convenient package. The sE8 itself is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule. Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound as well as a detailed transient response. With two microphones matched specifically for consistency, you'll be able to capture a clear and accurate stereo image.
The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately.
Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You'll also note a switchable low-pass filter that rolls off low end at either 80 or 160 Hz at 6 dB per octave.
To enhance durability—and to reject electrical interference and noise—the sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, the microphones come with two mic clips, two thread adapters, two windscreens, a stereo bar for mounting the microphones, and a robust metal case for protecting the mics when they're not in use.
Key Features:
- 3-micron, gold-sputtered diaphragm
- Handcrafted, hand-tuned capsule
- Precision electrode design for a linear, naturalistic response
- Backplate design provides smooth, natural sound and consistent off-axis response
- Electronic design provides low noise without the use of integrated circuits
- Transformerless design for transparency and clarity
- Class-A circuitry for a high dynamic range and transient response without distortion
- -10 and -20 dB pads, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more
- Low-pass filters, selectable between 80 and 160 Hz
- All-metal chassis provides efficient rejection of electrical interference and noise
- Includes two mic clips, each with a thread adapter
- Includes two windscreens
- Includes stereo bar for mounting microphones for stereo recording
- Includes a robust metal case
Specifications
Microphone | |
Primary Applications | Studio Recording |
Form Factor | Stand/Boom Mount |
Intended Sound Sources | Acoustic Guitar, Piano, Drums, Percussion, Cymbals, Overhead, Instrument, Strings, Room Ambiance |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Polar Pattern | Cardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | -10 dB-20 dB |
High-Pass Filter | 80 Hz, 6 dB/Octave160 Hz, 6 dB/Octave |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
On-Board Controls | High-Pass Filter, Pad |
Windscreen | Foam (Included) |
Performance | |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | Cardioid: 139 dB SPL Peak (1 kHz, .5% THD)159 dB SPL (1 kHz, .5% THD, with Pad) |
Impedance | 110 Ohms |
Load Impedance | 1 Kilohms |
Sensitivity | -32 dBV |
Dynamic Range | 126 dB (without Pad)146 dB (with Pad) |
Signal-to-Noise Ratio | 81 dB |
Equivalent Noise Level | 13 dB A-Weighted |
Connectivity | |
Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
Headphone Connector | None |
Power | |
Bus Power | None |
Operating Voltage | 48 V (Phantom Power) |
Operating Current Consumption | 2.7 mA |
Physical | |
Colour | Black |
Mounting | Mic Clip (Included) |
Included Case | Hard Case |
Included Filters | None |
Construction Material | Metal |
Dimensions | ø: 0.91 x L: 4.72" / ø: 23 x L: 120 mm |
Weight | 4.97 oz / 141 g |
In The Box
- sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)
- 2x Windscreen
- 2x Mic Clip
- 2x Thread Adapter
- 1x Stereo Mounting Bar
- 1x Metal Flight Case
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)
- Manufacturer: SE Electronics
- Model: SE_SE8PAIR
- SKU: SE_SE8PAIR
- RM Product #: 87792