The D10C2 SDI to Analog Video Converter provides excellent quality 10-bit conversion of SDI to analog component or composite video at a low cost. In the Component mode, the D10C2 outputs are user configurable to YPbPr (SMPTE, EBU-N10), Betacam, or RGB. In the Composite mode, the D10C2 provides 2 composite outputs and a YC (S-Video) output. The D10C2 also provides two re- clocked, loop-thru SDI outputs and a composite sync output (Component mode). All functions are user configurable via dip-switches.
Specifications:
Inputs
SDI (SMPTE 259M), 1x BNC
Outputs
For Component Input Only (270Mb):
YPbPr - SMPTE, EBU-N10, Betcam
RGB, 3 x BNC
Sync, 1 x BNC
For Composite Input Only (142/177Mb):
NTSC/PAL 1 x BNC
YC (S-Video), 2x BNC
Re-Clocked Loop-Thru SDI, 2 x BNC
D/A Converters
10-bit, 4x oversampling
Frequency Response
Y +/- .15dB to 5.5Mhz
C +/- .15dB to 2.5 Mhz (Component)
C +/- .15dB to 1.3Mhz (Composite)
Less Than .5% K Factor (2T)
- Power: 5VDC Regulated, 4 Watts, Power Supply Required (sold separately)
- Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
