- Converts between audio level signals
- Tappings for 100V, 70V, 50V and 33V audio levels
- Stops hum and buzz created by ground loops
- Product: #76170
- SKU: ATU44MK2
The Audac ATU44MK2 Universal Input Adapter is a universal input adapter unit for conversion between various audio level signals, offering a wide variety of connection and extention possibilities to audio systems. The speaker level input features various tappings for 100V, 70V, 50V and 33V audio levels, while a balanced line input allows conversion between balanced and/or unbalanced line level audio signals.
A typical application example is the conversion of any loudspeaker level audio signal to balanced or unbalanced line level signals. Any type of loudspeaker level signal can get applied to its input. This can be useful for expansion of any constant voltage distributed audio system and feeding the transformed output to an additional amplifier. Another typical application is connection of recording equipment on loudspeaker lines. Using the galvanic isolation between all the in & outputs, it can be used as an audio isolation solution, solving hum and buzz problems caused by ground loops.
The front panel switch allows input signal selection between line or loudspeaker level input, while all inputs are connected using terminal block connectors. The line output is connected using a male XLR connector.
A variety of optionally available mounting brackets are allowing desk, closet or 19” equipment rack installation.
Not specified by manufacturer