SKB
SKB 3I-4217-18T iSeries Waterproof Acoustic Guitar Case (tan)
- Gasketed, waterproof, submersible design
- Automatic ambient pressure equalisation
- Moulded-in hinge
- Reinforced locking loops
- Convenient quiet-glide wheels
In stock
Ships tomorrow
You Pay:
$769.00
SKB Injection-Molded 2 RU Studio Flyer Rack Case
- Compact Carry-On Size
- Waterproof and Impact-Resistant
- Moulded-In, Front and Rear Rack Rails
- 2 RU Studio Rack and Laptop Combo Case
- Cord Pockets
In stock
Ships tomorrow
You Pay:
$579.00
SKB 1SKB-R6U 6U Roto Rack
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships tomorrow
You Pay:
$479.00
You Pay:
$57.95
SKB 2U Roto Shallow Rack Case with Steel Rails
- Holds "Rack-able" Equipment
- Two Vertical Rack Units
- Multiple Applications
- Rail-To-Rail Depth of 27.2 cm
- Steel Front & Rear Threaded Rails
In stock
Ships tomorrow
You Pay:
$319.00
SKB 1SKB-R2U 2U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships tomorrow
You Pay:
$369.00
SKB 8U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships tomorrow
You Pay:
$539.00
SKB 3i-2217M103U 3U iSeries Injection Moulded Fly Rack (13") - Open Box Special
- 3U Removable injection moulded shock rack cage
- 13 inch rack depth
- Interior foam protection
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case construction
In stock
Ships tomorrow
$899.00
You Pay:
$799.00
SKB 10U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
In stock
Ships tomorrow
You Pay:
$589.00
SKB 1SKB-R8UW Roto Rolling Rack Case (8 RU)
- 8 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
In stock
Ships tomorrow
You Pay:
$669.00
SKB 1SKB-R6UW Roto Rolling Rack Case (6 RU)
- 6 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
In stock
Ships tomorrow
You Pay:
$669.00
SKB-VS1 Rackmount Hook and Loop Fastener Shelf
- Fits Most SKB Rack Mount Cases
- HD Hook and Loop Fastener Surface
- Rackmount pull-out shelf
- Uses 2U of rack space
In stock
Ships tomorrow
You Pay:
$289.00
SKB-R908U20 8U Roto Shock Rack 20" ATA Case
- Standard 19" rack
- Meets most ATA and Military specifications
- Water resistant case
- Adjustable Elastomer shock absorbers
In stock
Ships tomorrow
You Pay:
$1,699.00
SKB iSeries 0705-3 Waterproof Single GoPro Case
- Holds GoPro & Accessories
- Polypropylene Copolymer Resin Exterior
- Custom-Cut Foam Interior
- Accessory Compartment
- Battery and BacPac Slots
In stock
Ships tomorrow
You Pay:
$129.00
SKB H4816W ATA Large Stand Case
- Meets ATA specifications
- Spring loaded reverse-cinch buckles
- Moulded-in bumpers
- Moulded in sure-grip handle
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$719.00
SKB 1SKB-R3S 3U Roto Shallow Rack Case with Steel Rails
- Holds "Rack-able" Equipment
- Three Vertical Rack Units
- Multiple Applications
- Rail-To-Rail Depth of 27.2 cm
- Steel Front & Rear Threaded Rails
Estimated stock due 26th of March
You Pay:
$359.00
SKB 4U Roto Rack Rack Case
- Rotationally Moulded Polyethylene Plastic
- Front and Rear Steel Rack Rails
- Recessed Steel Twist Latches
- Front and Rear Gasket Covers
- Heavy-Duty Flush-Mount Handles
Estimated stock due 19th of March
You Pay:
$409.00
SKB-H5020W ATA XL Stand Case
- Moulded-in bumpers
- Field replaceable components
- Sure-grip handle
- Roto-moulded indestructability
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$669.00
SKB iSeries Case for ATEM Mini or ATEM Mini Pro Switcher
- Custom-Cut Foam for ATEM Mini/Mini Pro
- Fits Switcher, Power Supply, Accessories
- 1 x Large Accessory Pocket
- Moulded Polypropylene Copolymer Resin
- Gasket-Sealed Design, Moulded-In Hinge
In stock
Ships tomorrow
You Pay:
$139.00
SKB 4U Roto Shallow Rack Case with Steel Rails (1SKB-R4S)
- Holds "Rack-able" Equipment
- Four Vertical Rack Units
- Multiple Applications
- Rail-To-Rail Depth of 27.2cm
- Steel Front & Rear Threaded Rails
Estimated stock due 30th of April
You Pay:
$399.00
SKB 1SKB-R4UW Roto Rolling Rack Case (4 RU)
- 4 RU of Rack Space
- One-Touch Pull Handle
- Rolling Wheels on Back Lid
- Military-Grade Butterfly Latches
- Threaded Steel Rails
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$549.00
SKB D1214 Floor Tom Case 12 x 14" (Black)
- Holds One 12 x 14" Floor Tom
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$289.00
SKB Mixer Safe 34 Universal Mixing Board Case
- ATA rated
- For wider non-rackable mixers
- Durable twist latches
- Cushioned rubber feet
- Spring-loaded handles
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$619.00
SKB iSeries RODECaster Pro Podcast Mixer Case
- Form-Cut Foam for RODECaster Pro.
- Main Removable Pocket for 2 x PodMics.
- 2 x Accessory Pockets.
- Mil-Standard Waterproof Case.
- Moulded Polypropylene Copolymer Resin.
Estimated stock due 26th of March
You Pay:
$389.00
SKB iSeries 0907-4 Waterproof Double GoPro Case
- Holds Two GoPros & Accessories
- Polypropylene Copolymer Resin Exterior
- Custom-Cut Foam Interior
- Accessory Compartment
- Battery and BacPac Slots
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$139.00
SKB 3i-2217M103U 3U iSeries Injection Moulded Fly Rack (13")
- 3U Removable injection moulded shock rack cage
- 13 inch rack depth
- Interior foam protection
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case construction
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$899.00
SKB 1SKB-1916 Wheel Kit for Shock Rack
- Consumer installable caster kit
- Four 4" lockable casters
- Compatible with select cases
- Roto moulded polyethylene
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$579.00
SKB D6514 Snare Drum Case 6.5 x 14" (Black)
- Holds One 6.5 x 14" Snare Drum
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$239.00
SKB-3I-1610-5B-C Hard Case
- Polypropylene Copolymer Resin Case
- Gasketed, Waterproof and Dust-tight
- ATA Category 1 Rated
- Continuous Moulded-in Hinge
- Trigger Release Latch System
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$269.00
SKB 000 Sized Acoustic Guitar Case
- Reinforced nylon trigger release latching system
- TSA recognized and accepted locks
- Bumper protected valance
- Indestructible cushioned rubber over-molded handle
- Full length neck support
In stock
Ships tomorrow
You Pay:
$249.00
SKB SKB19-RSF4U 4U Studio Flyer Case
- Rotomolded Polyethylene Case
- Fits 4U Recording Device or Disk Drive
- Adjustable Laptop Compartment
- Removable Front & Back Doors
- Reinforced Nylon Trigger Release Latches
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$669.00
SKB 10x6 Roto Rack Console
- Slanted 10U Top and Standard 6U Front
- Roto-Moulded One Piece Base
- Works with the SKB AV-8 Shelf
- Flat hard top
- Durable steel threaded rails
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$669.00
SKB Snare Drum Case 5.5 x 14" (Black)
- Holds One 14 x 35.6 cm Snare Drum
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$239.00
SKB 4/4 Cello Shell Case
- Scratch resistant granite finish
- Built-in wheels
- Ergonomically crafted grip handles
- Two interior pockets
- Holds two bows
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$719.00
SKB DH3315W Mid Sized Hardware case
- Holds Seats, Pedals, Mounts
- Two Built-in Roller Blade Wheels
- Telescoping, Moulded Pull-out Handle
- Removable Lid
- Dual Nylon Web Cinch Closure
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$509.00
SKB SKB3I-1914-8B-C Military Standard Case
- Polypropylene Copolymer Resin Case
- Gasketed, Waterproof and Dust-Tight
- ATA Category 1 Rated
- Continuous Moulded-in Hinge
- Trigger Release Latch System
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$609.00
SKB D1113 Tom Case 11 x 13" (Black)
- Holds One 11 x 13" Tom
- Rotationally Moulded Polyethylene
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$289.00
SKB H4812W ATA Regular Stand Case
Designed specifically for transporting mic stands, drum hardware, etc.
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$529.00
SKB Snare Drum Case 4 x 14" (Black)
- Holds One 4 x 14" Snare Drum
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
- Heavy-Duty Web Strap / Reliable Closure
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$209.00
SKB Trap ATA Stand Case with Wheels - holds Audio and Lighting Stands up to 36 1/2 x 11 7/8 x 8 1/4"
- For Lighting, Audio, & Sports Equipment
- Fits Mic Stands and Drum Hardware
- ATA Certified
- Polyethylene Hard-Shell Construction
- Inline Skate Wheels
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$429.00
SKB Tom Case 8 x 10" (Black)
- Holds One 8 x 10" Tom
- Rotationally Moulded Polyethylene
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$179.00
SKB Contoured Pro Alto Sax Case
- Valances to help ensure a secure fit
- Reinforcing black hardware
- Interior compartment
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$289.00
SKB SKB3I-1813-5B-C Military Standard Case
- Polypropylene Copolymer Resin Case
- Cubed Foam Interior
- Gasketed, Waterproof and Dust-tight
- ATA Category 1 Rated
- Continuous Moulded-in Hinge
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$429.00
SKB SKB19-P12 ATA Pop-Up 12 Unit Mixer Case
unique angle-set feature lets you control the tilt of the board.
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$529.00
SKB Contoured Pro Tenor Sax Case
- Valances to secure instrument fit
- Hardware reinforced backplated latches
- Exterior pouches
- Interior compartment for neck and mouthpiece
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$269.00
SKB iSeries 1510-6 Waterproof Case for DJI Osmo
- Fits Osmo Handheld 4K Camera & Gimbal
- Compartment for Zenmuse X5
- Polypropylene Copolymer Resin Exterior
- Custom-Cut Foam Interior
- Slots for Batteries, Chargers, Filters
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$289.00
SKB SKB3I-1711-6B-E Military Standard Waterproof Case
- Gasketed, Water & Dust-Tight Design
- ATA Rated
- Moulded-In Hinges
- Cushion Grip Handle
- Auto Ambient Pressure Equalisation Valve
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$259.00
SKB Tom Case 10 x 10" (Black)
- Holds One 10 x 10" Tom
- Rotationally Moulded Polyethylene
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$209.00
SKB Roto-Molded Tripod Case with Wheels - 107cm
- Holds Tripod, Light Stands
- Quiet Glide Wheels
- Removable Top
- Rotationally Moulded Polyethylene
- Foam in Lid and Base
Out of Stock with Supplier
Usually ships in 8 - 12 weeks
You Pay:
$509.00
SKB Floor Tom Case 14 x 16" (Black)
- Holds One 14 x 16" Floor Tom
- Rotationally Moulded Polyethylene
- Roto-Moulded-X Design / Stackable
- Padded Interior for Added Protection
- Pedestal Feet for Upright Positioning
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$259.00
