Light Stands & Mounting

Aputure LiteBase "200m" 2.8m Light stand
- Low weight
- Spring dampers
- Standard thread
- Operating height from 115 - 260cm
In stock
Ships tomorrow
$87.95
You Pay:
$71.95

Manfrotto 026 Swivel Adapter
An adapter with the ability to rotate - supports up to 2.5kg
In stock
Ships tomorrow
$72.95
You Pay:
$67.95

Aputure LiteBase 200S
- Low weight
- 1/4" thread
- Operating height from 80 - 190cm
- Rubber feet
In stock
Ships tomorrow
You Pay:
$50.95
(3) reviews

9.SOLUTIONS Python Clamp with Grip Joint
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- Grip Joint with 3/8" & 5/8" Receptacles
- 3/8"-16 (M10) Connection
In stock
Ships tomorrow
$75.95
You Pay:
$40.95

9.SOLUTIONS 5/8" Rod Set (500mm)
1-Set of 500mm Long Rods, 3/8"-16 Threads on Both Ends of the Rod
In stock
Ships tomorrow
$73.95
You Pay:
$36.95

9.SOLUTIONS Double Joint Arm (Short, 360mm)
2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 30.8 lb
In stock
Ships tomorrow
$189.00
You Pay:
$80.95

9.SOLUTIONS Savior Clamp Mini
- Load Capacity: 30 kg
- Weighs 135 g
- 30 mm Jaw Opening
In stock
Ships tomorrow
$65.95
You Pay:
$29.95
(1) review

Manfrotto 143N Magic Arm without Bracket
- Meets leading Italian standards
- Robust aluminium supports < 3 kg
- Reaches up to 53cm for ultimate practicality
- Maximum flexibility
- Inbuilt locking lever
In stock
Ships tomorrow
$209.00
You Pay:
$199.00

Manfrotto 119 Adapter Spigot
Features a double female thread with a 1/4 inch and a 3/8 inch thread.
In stock
Ships tomorrow
$10.95
You Pay:
$9.95

Saramonic Magic Boom Pole 5-section 10' Aluminum Boom Pole
With 3/8", 1/4"-20, & 5/8" Mounts
In stock
Ships tomorrow
$279.00
You Pay:
$179.00

9.SOLUTIONS Python Clamp with 3/8" Male Thread
Load Capacity: 20kg, Jaws Open from 0 to 50mm
In stock
Ships tomorrow
$64.95
You Pay:
$30.95

9.SOLUTIONS Savior Clamp
- Load Capacity: 30 kg
- Weighs 0.44 kg
- 60 mm Jaw Opening
- Accommodate odd shapes
In stock
Ships tomorrow
$82.95
You Pay:
$37.95

9.SOLUTIONS Python Double Clamp
- Load Capacity: 20 kg
- Jaws Open from 0 to 50 mm
- Two clamps
- Dual contoured jaws
In stock
Ships tomorrow
$99.95
You Pay:
$52.95

9.SOLUTIONS Python Clamp with Snap-In Socket
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- 5/8" Receiver
- 3/8"-16 (M10) Connection
In stock
Ships tomorrow
$88.95
You Pay:
$44.95

Matthews Hollywood Combo Steel Stand - 14.75' (4.5m)
- Steel Construction
- 4 Sections, 3 Risers
- Rocky Mountain Lazy Leg
- Junior (1-1/8") Receptor
- Baby (5/8") Spigot
In stock
Ships tomorrow
$739.00
You Pay:
$619.00

9.SOLUTIONS 5/8" Rod Set (250mm)
- 1-Set of 9.8" Long Rods
- 3/8"-16 Threads on Both Ends of the Rod
- Includes One Rod Connector
- Used for Rigging Lights and Cameras
- Used with a Variety of Other Accessories
In stock
Ships tomorrow
$49.95
You Pay:
$26.95

9.SOLUTIONS 5/8" Rod Set (150mm)
- 1-Set of 5.9" Long Rods
- 3/8"-16 Threads on Both Ends of the Rod
- Includes One Rod Connector
- Used for Rigging Lights and Cameras
- Used with a Variety of Other Accessories
In stock
Ships tomorrow
$40.95
You Pay:
$20.95

9.SOLUTIONS 3/8" Gag
- Revolving 3/8" and 5/8" Receptacle
- Accepts Optional Pass-Through Rods
In stock
Ships tomorrow
$47.95
You Pay:
$20.95

Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping.
In stock
Ships tomorrow
$119.00
You Pay:
$94.95

Matthews Quacker Clamp
- AKA - Duck Bill or Platypus Clamp
- For Positioning Foam Core, Reflector or Bead Board
In stock
Ships tomorrow
$179.00
You Pay:
$139.00

Manfrotto 035 Super Clamp without Stud
- Lightweight cast alloy
- Holds just about anything
- Mount on any tube 13 - 55 mm
- Jaw Opening of 1.3 - 5.3 cm
- Stud not included
In stock
Ships tomorrow
You Pay:
$59.95

GRAVITY LS TBTV 28 Lighting Stand with T-Bar (Large)
Large telescopic lighting stand with T-Bar
In stock
Ships tomorrow
$149.00
You Pay:
$109.00

Matthews Hollywood 1.6m C-Stand with Sliding Leg Grip Head and 50cm Arm (Black)
- 50cm Riser
- Stands Will Nest, Saving Valuable Space
- 1 Sliding Leg for Use on Uneven Surfaces
- Grip Head & Arm to Position Flags, Etc.
In stock
Ships tomorrow
$379.00
You Pay:
$319.00

9.SOLUTIONS 16mm Rod Set (750 mm)
- 1-Set of 750mm Long Rods
- 3/8"-16 Threads on Both Ends of the Rod
- Includes One Rod Connector
- Used for Rigging Lights and Cameras
- Used with a Variety of Other Accessories
In stock
Ships tomorrow
$84.95
You Pay:
$46.95

9.SOLUTIONS Snap-in Socket
- Mounts to any 3/8"-16 male thread
- 3/8" Female Thread, 5/8" Receiver
- Enables 1-hand operation
In stock
Ships tomorrow
$43.95
You Pay:
$19.95

9.SOLUTIONS Mini Rigging Rod Set Nuts
- 2x Long Nuts
- 6x Finger Nuts
- 3/8" Thread
In stock
Ships tomorrow
$30.95
You Pay:
$14.95

Matthews C - Clamp with 2- 5/8" Baby Pins - 6"
- 2 Separate 5/8" Diameter Pins
- Clamp Jaw Offers a Maximum 6" Opening
- Allows Light Fixtures to Fit with Minimal Clearance
In stock
Ships tomorrow
$129.00
You Pay:
$99.95

Matthews Apple Box Half (50.8x30.5x10.2cm)
Smooth natural finish, Rounded-edge cut-outs for easy handling
In stock
Ships tomorrow
$99.95
You Pay:
$75.95

Kupo KCP-950P 4-Way Clamp for 1.4-2.0"(35 - 50 mm) Tube
Mounts Around Tubing Sized 1.4-2.0", Four Recessed Mounting Points
In stock
Ships tomorrow
$48.95
You Pay:
$37.95

CHAUVET CLP-35HC Lighting Clamp
Heavy duty aluminum clamp designed to fit the TRUSST® Arch and Goal Post truss kits
In stock
Ships tomorrow
$23.95
You Pay:
$16.95

Manfrotto 118 Spigot with Double Male Thread
A 16mm spigot with double male thread 1/4 inch and 3/8 inch.
In stock
Ships tomorrow
$11.95
You Pay:
$10.95

Kupo KS-023 3/8"-16 Threaded Mounting Plate with Baby 5/8"(16mm) Stud
Mounts Accessories to Convi Clamp
In stock
Ships tomorrow
$20.95
You Pay:
$16.95

9.SOLUTIONS Suction Cup
- Load Capacity: 1.9 kg
- Equipped with Cheese Block
- Multiple 1/4"-20 & 3/8"-16 Taps
- 2 x 3/8" Rod Clamps
In stock
Ships tomorrow
$149.00
You Pay:
$64.95

Matthews Apple Box Quarter (50.8x30.5x5cm)
Smooth natural finish, Rounded-edge cut-outs for easy handling
In stock
Ships tomorrow
$82.95
You Pay:
$79.95

Tether Tools Rock Solid Baby Ballhead Adapter
Aluminum Construction, 16mm Receiver, Barrel Fits in Junior 28 mm Receiver, Oversized Tightening Knob
In stock
Ships tomorrow
$73.95
You Pay:
$63.95

Kupo KS-091 Baby 5/8"(16mm) Stud, 4.25"(10.8cm) Long for 3 & 4-Way Clamp
Notch for Mounting Location, Locking Collar
In stock
Ships tomorrow
$14.95
You Pay:
$11.95

Matthews Baby Boa Weight Bag (2.2kg, Black)
Weighs 2.2kg, Cordura nylon shell, with 2 wings
In stock
Ships tomorrow
$109.00
You Pay:
$78.95

Tether Tools Dual Wing Sand Bag
Saddle style means it can be draped over a stand leg or boom, hung from a tripod with the included D ring, or hung from a J-Hook by the strap handle.
In stock
Ships tomorrow
$59.95
You Pay:
$52.95

Tether Tools RapidMount Cold Shoe Elbow
- Standard cold shoe mount with tightening screw.
- 180º Tilt head with tightening screw.
- 360º Swivel head for easy adjustment.
- Umbrella mounting hole.
- TruVu locking technology.
- All aluminum construction.
- Non-reflective black finish.
In stock
Ships tomorrow
$47.95
You Pay:
$38.95

Manfrotto 035C Super Clamp without Stud (Ratchet version)
- Securely mounted on any tube from 13 to 45 mm
- Equipped with ratchet handle
- Universal 1/4'' thread attachment
- Attachment is 5/8'' hexagonal socket
In stock
Ships tomorrow
You Pay:
$67.95

Manfrotto Nanopole Stand With Removable Column
- Lightweight, strong & compact professional lighting stand
- Detachable column for two-in-one use
- Additional stability with hook for sandbag and levelling leg
- 16mm male top stud with 3/8” or 1/4” thread attachments
- Strong construction supports payloads of up to 1.5 kg
In stock
Ships tomorrow
$135.00
You Pay:
$129.00

9.SOLUTIONS Savior Spring Clamp
- Load Capacity: 10 kg
- Weighs 320 g
- Wide jaws
- Strong torsion spring
- Support irregularly shaped objects
In stock
Ships tomorrow
$61.95
You Pay:
$32.95

Matthews Baby Plate - 3"
This item may be used on a wall, or free-standing as a floor-level light mount.
In stock
Ships tomorrow
$40.95
You Pay:
$33.95

Kupo CS-40MKB Master C-Stand 101.6cm (Black)
Master C-Stand with Sliding Leg - 325cm height
In stock
Ships tomorrow
You Pay:
$289.00

Impact Light Stand, Black - 6' (1.8m)
One of the most economical light stands available
You Pay:
$68.95
(1) review

Kupo CT-40MKB 101.6cm Riser C-Stand Turtle Base Kit (Black, 2.96m)
Load Capacity: 10kg, Max. Height: 2.96m, Min. Height: 1.34m
In stock
Ships tomorrow
You Pay:
$339.00
(1) review

Manfrotto 1004BAC Air Cushioned Master Stand
- Folds Flat, Stacks
- Three Risers
- Double-Braced Leg Base
- Aluminium Locking Collars
In stock
Ships tomorrow
You Pay:
$259.00
(1) review

9.SOLUTIONS Barracuda Clamp
- Load Capacity: 20 kg
- Weighs 0.55 kg
- 60 mm Jaw Opening
- 5/8" Receiver
- Fits all Super Clamp Accessories
In stock
Ships tomorrow
$86.95
You Pay:
$47.95
(1) review

Phottix Saldo 280 Air-Cushioned Light Stand (280cm)
Load Capacity: 3kg, Maximum Height: 280cm, Folded Length: 83cm
In stock
Ships tomorrow
You Pay:
$119.00
(1) review
