Light Stand Accessories
Kupo KSD-1680C 15.9kg Touch-Fastener Empty Refillable Sandbag
Convenient Closure &Sturdy Handle
In stock
Ships tomorrow
You Pay:
$63.95
Phottix Stay-Put Sandbag II (Medium)
Holds up to 6 kg, Ships Empty, Double Zippered, Saddlebag Design.
In stock
Ships tomorrow
You Pay:
$33.95
Orca OR-81 Water / Sand Bag
- Designed to carry water / sand
- Dual layers of hook and loop fasteners
In stock
Ships tomorrow
You Pay:
$53.95
Manfrotto 244N Variable Friction Magic Arm
- Authentic Italian standard
- Lightweight and long lasting durability
- Carries 3 kg
- Variable friction and ergonomic knob
- Standard-size attachments
No supplier stock
Usually ships in 8 - 12 weeks
You Pay:
$259.00
Avenger C1000 Drop Ceiling Scissor Clamp
Zinc Steel Construction, 5/8" Stud
Usually ships in 2 - 3 weeks
You Pay:
$27.95
Manfrotto LBAG110 - Light Stand Bag
- For 3 Quick Stack Light Stands up to 109.2 cm
- Padded Cordura Nylon Bag
- Attached Shoulder Strap with Pad
Usually ships in 2 - 3 weeks
You Pay:
$189.00
Impact Empty Saddle Sandbag - 8kg (Black)
Used for securing the bases of light stands and set walls
In stock with supplier
Usually ships in 6 - 9 days
You Pay:
$48.95
Impact Empty Saddle Sandbag Kit, Set of 6 - 12 Kg (Black)
A set of 6 black, double zippered bags that ship empty
In stock with supplier
Usually ships in 6 - 9 days
You Pay:
$239.00
Orca OR-81B Water Bladder Pocket
- Contain up to 6L
- Use with the OR-81 water / sand bag
Stock due this week
You Pay:
$11.95
Impact 40" Extension Grip Arm (Silver)
Large T-Handle, Universal 2.5" Grip Head, 5/8" Diameter Bar
In stock with supplier
Usually ships in 6 - 9 days
You Pay:
$119.00
Manfrotto 143A Magic Arm with Bracket
An articulating arm the will support up to 3kg
In stock
Ships tomorrow
You Pay:
$189.00
You Pay:
$129.00
Manfrotto 196AB-2 Articulated Arm
A 2 section articulated arm with bracket that can support up to 1.5kg
Estimated stock due 21st of September
You Pay:
$53.95
Impact Telescopic Collapsible Reflector Holder
The Impact Telescopic Collapsible Reflector Holder is ideal for mounti
In stock with supplier
Usually ships in 6 - 9 days
You Pay:
$149.00
Manfrotto 396B-2 Double Articulated Arm - 2 Sections With Camera Bracket
- Double articulated arms, to support loads up to 5 kg
- Very lightweight, weighs 0.64 kg
- Two sections articulated arm, max length 62.5 cm
- Sliding extension allow for flexible positioning.
- Supplied with camera bracket
In stock
Ships tomorrow
$199.00
You Pay:
$174.00
Impact Empty Sandbag - 12.2kg (Black Cordura)
Used for securing the bases of light stands and set walls
In stock with supplier
Usually ships in 6 - 9 days
You Pay:
$56.95
Manfrotto FF3512N86 Pantograph with Wire Cable
An option for lights to be suspended - supports up to 18kg
No supplier stock
Usually ships in 8 - 12 weeks
You Pay:
$769.00
9.SOLUTIONS Double El-Bo Arm
- Load Capacity: 6.0 kg
- 5/8" Pin with 3/8" Female Thread
- 3/8"-16 Male Thread
In stock
Ships tomorrow
$309.00
You Pay:
$274.00
Manfrotto 244 Variable Friction Magic Arm with Camera Bracket
- Meets high Italian standards
- Stretches 53 cm in length
- Secure locking function
- 035 Super Clamp to add more accessories
Usually ships in 2 - 3 weeks
You Pay:
$259.00
You Pay:
$159.00
9.SOLUTIONS 3/8" Rod Set (500mm)
Aluminum Construction, 3/8" Rods and Thread
In stock
Ships tomorrow
You Pay:
$38.95
9.SOLUTIONS Quick Mount Gooseneck
Magnetic Grip, Flexible Arm, Length: 25cm, Instant Thread Alignment
In stock
Ships tomorrow
You Pay:
$63.95
Manfrotto 237 Flexible Arm
A flexible arm designed to be used with the super clamp -12mm diameter
In stock with NZ supplier
Usually ships in 1 - 2 days
You Pay:
$52.95
Manfrotto 196AB-3 Articulated Arm
An articulated arm with 3 sections that can support up to 1.0kg
No supplier stock
Usually ships in 8 - 12 weeks
You Pay:
$64.95
9.SOLUTIONS Double Joint Arm (Long, 660mm)
2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 11 lb
In stock
Ships tomorrow
$199.00
You Pay:
$174.00
9.SOLUTIONS El-Bo Arm
Load Capacity: 33 lb, 5/8" Pin with 3/8" Female Thread
In stock
Ships tomorrow
$159.00
You Pay:
$145.00
Kupo 350 Runway Stand Base
1-1/8" Receiver, Accepts C Stand Riser, Braked Casters
In stock
Ships tomorrow
You Pay:
$219.00
9.SOLUTIONS Double Joint Arm (Short, 360mm)
2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 30.8 lb
In stock
Ships tomorrow
$169.00
You Pay:
$152.00
9.SOLUTIONS Double Joint Arm (Medium, 460mm)
2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 9kg
In stock
Ships tomorrow
You Pay:
$199.00
9.SOLUTIONS Snap-in Socket
- Mounts to any 3/8"-16 male thread
- 3/8" Female Thread, 5/8" Receiver
- Enables 1-hand operation
In stock
Ships tomorrow
$44.95
You Pay:
$41.00
Tether Tools Rock Solid 22" Telescoping Arm
- Aluminium Construction
- 34.6 to 55.8 cm extension
- 3/8" Baby (5/8") Studs at Each End
In stock
Ships tomorrow
You Pay:
$49.95
Kupo KS-308 Monitor Adapter Arm with Baby Receiver
5/8"(16 mm) Receiver, VESA 3x3" TV Mounting Plate, Ratcheting Handles
Usually ships in 8 - 12 weeks
You Pay:
$189.00
9.SOLUTIONS EX-SUS Extension Suspension Pole
Load Capacity: 20kg, Telescoping Design: 110-198 cm
In stock
Ships tomorrow
$249.00
You Pay:
$221.00
Manfrotto 271 Panel Clamp (Black)
- Clamps onto rounded square tubes
- 5/8" female socket
Usually ships in 2 - 3 weeks
You Pay:
$73.95
Manfrotto 196B-3 Articulated Arm
- Payload 1 kg at full extension
- Very lightweight, weighs 0.63 kg
- Three sections articulated arm, max length 85 cm
- Sliding extension allow for flexible positioning.
- Supplied with camera bracket
Usually ships in 2 - 3 weeks
You Pay:
$129.00
Manfrotto 143N Magic Arm without Bracket
- Meets leading Italian standards
- Robust aluminium supports < 3 kg
- Reaches up to 53cm for ultimate practicality
- Maximum flexibility
- Inbuilt locking lever
No supplier stock
Usually ships in 8 - 12 weeks
You Pay:
$189.00
You Pay:
$99.95
9.SOLUTIONS 5/8" Rod Set (500mm)
1-Set of 500mm Long Rods, 3/8"-16 Threads on Both Ends of the Rod
In stock
Ships tomorrow
You Pay:
$73.95
9.SOLUTIONS 5/8" Rod Set (250mm)
- 1-Set of 9.8" Long Rods
- 3/8"-16 Threads on Both Ends of the Rod
- Includes One Rod Connector
- Used for Rigging Lights and Cameras
- Used with a Variety of Other Accessories
In stock
Ships tomorrow
You Pay:
$52.95
9.SOLUTIONS 5/8" Rod Set (1000mm)
1-Set of 1000mm Long Rods, 3/8"-16 Threads on Both Ends of the Rod
In stock
Ships tomorrow
You Pay:
$109.00
Manfrotto 396AB-3 Double Articulated Arm - 3 Sections Without Camera Bracket
- Quick lock mechanism
- Three adjustable sections
- Support loads up to 5 kg
- Extends to 86.4 cm
Usually ships in 2 - 3 weeks
You Pay:
$219.00
9.SOLUTIONS 5/8" Rod Set (150mm)
- 1-Set of 5.9" Long Rods
- 3/8"-16 Threads on Both Ends of the Rod
- Includes One Rod Connector
- Used for Rigging Lights and Cameras
- Used with a Variety of Other Accessories
In stock
Ships tomorrow
You Pay:
$42.95
Phottix Varos Pro M Multi-Function Flash Shoe Umbrella Holder
Supports up to 62 lb (28 kg), Female Threaded Insert, Metal Cold Shoe.
Usually ships in 2 - 3 days
You Pay:
$50.95
Kupo KS-029 Monitor Adapter
Aluminum Construction, 5/8"(16mm) Receiver, Ratcheting Handles
In stock
Ships tomorrow
You Pay:
$56.95
9.SOLUTIONS 3/8" Rod Set (150mm)
- Aluminium Construction
- 3/8" Rods and Thread
In stock
Ships tomorrow
You Pay:
$21.95
Avenger C1100 Sparrow Plate
Zinc-plated Steel Construction, 5/8" Stud
Special order from Supplier
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Manfrotto 237HD Flexible Arm
A flexible arm designed to be used with the super clamp -18mm diameter
In stock with NZ supplier
Usually ships in 1 - 2 days
You Pay:
$64.95
You Pay:
$62.95
Impact Six Empty Saddle Sandbag Kit - 6.8 kg (Black)
Six-Pack Kit, Cordura Nylon, Rugged and Durable Assembly
In stock with supplier
Usually ships in 6 - 9 days
You Pay:
$269.00
Manfrotto 035WDG Wedge Inserts for Super Clamp (Set of Four)
- Wedge insert for Super Clamp
- Increases gripping strength and stability on flat surfaces
- Made of technopolymer
Usually ships in 2 - 3 weeks
You Pay:
$15.95
