dB Technologies

• 2-way passive speaker.
• Clean design.
• M8-thread rigging points.
• Rotatable horn for vertical or horizontal use.
• Wooden lightweight enclosure.

• 2-way passive speaker.
• Clean design.
• M8-thread rigging points.
• Rotatable horn for vertical or horizontal use.
• Wooden lightweight enclosure.

• 28/56-bit DSP processing.
• Parametric AEQ, delay, phase, compressor/limiter, level control.
• 24 bit/96 kHz AD/DA convertors.
• 2 balanced inputs x 6 balanced outputs with flexible routing.
• 2 x AES/EBU inputs and 2 x AES/EBU outputs.
• RDNet hardware interface.
• Front panel or USB / RDNet remote control support using dB Technologies software.

• Tri-Amped 2400W Peak.
• 2 x Top Satellites.
• Dual 12" Subwoofer.
• 5-Channel Mixer with Bluetooth Receiver.
• DSP with 3-Configuration Modes.

• 1200W Peak Power.
• 128 dB Max SPL.
• Class-D Amplifier.
• Asymmetrical Design Horn.
• Dual XLR-1/4" Combo Mic/line Inputs.

• 1800W of efficient Class-D Digipro G3 power drives a premium 18'' woofer.
• Intuitive design with integrated controls for sensitivity, polarity, and delay.
• Select your desired crossover frequency with ease from 70Hz up to 110Hz.
• Rugged design with excellent portability - perfect for mobile performers.
• Monitor and control your system in real-time via RDNet and Aurora Net.

• Professional acoustic performance on the move.
• An integrated wireless microphone system.
• Includes a bodypack transmitter.
• Channel 1/RF priority function.
• Onboard audio media player.
• SD card, USB and bluetooth connection.
• Up to 4 input channels (3 in plus 1 bluetooth).
• Compact and featherweight.
• Integrated wheels plus retractable handle for easy smooth transportation.

• Bluetooth® Connection
• 3 INPUT Channels
• DSP Presets for Wide Versatility
• Soft Cover Included

• Professional acoustic performance on the move.
• An integrated wireless microphone system.
• Includes a handheld transmitter.
• Channel 1/RF priority function.
• Onboard audio media player.
• SD card, USB and bluetooth connection.
• Up to 4 input channels (3 in plus 1 bluetooth).
• Compact and featherweight.
• Integrated wheels plus retractable handle for easy smooth transportation.

• For the Opera 15
• Waterproof cover
• Back and front vents

For the Opera 12 Waterproof cover Back and front vents

• In-ear system.
• Inputs: 2x XLR mic/line.
• Outputs: 2x XLR (thru).
• Frequency: VHF band 1 (170-230 MHz) divided in 3 bands of 10 MHz, 8 channels per band.
• Sensitivity: -90 dBm for 85 signal/noise ratio.
• Signal/noise ratio: 104 dB.
• Contents: beltpack, transmitter.

• Active 2-way stage monitor.
• Coaxial configuration.
• Linear phase FIR Filters.
• Ultra-precise directivity.
• Rotatable horn (90°x60° or 60°x90° dispersion).
• Front-rear grille design.
• Integrated handle on bottom side.

• Active Bass-reflex Subwoofers.
• 900W RMS Digipro G3 Amp.
• Up to 133 dB SPL.
• Real time control via RDNet.
• On-board delay control.
• On-board crossover point control.
• Designed to work vertically or horizontally.
• Integrated top-edge handles.
• 2x M20 threads on top and side.

• Designed for optimised acoustic and mechanical compatibility with VIO L210.
• New acoustic design featuring all-in-one phase plug and HF horn front panel.
• Low-latency processing thanks to powerful DSP with linear-phase FIR Filters.
• Full compliance with Aurora net remote control software.
• DSP presets for maximum acoustic customisation.
• Built-in flying hardware acoustic fast & easy set up and flying operations.