SHOP MARCH BRAND BLITZ! Up to 35% OFF!

Mounting Hardware




$
to
$



SAVE 23%
Impact 5/8" Snap-in Pin for Super Clamps (Black)

Impact 5/8" Snap-in Pin for Super Clamps (Black)

Used to connect a lighting fixture to a Super Clamp
In stock Ships tomorrow
$16.95
You Pay: $12.95
$16.95
SmallRig Crab-Shaped Clamp

SmallRig Crab-Shaped Clamp

  • Mounts on Surface 1.2 to 6.6cm Wide
  • 1/4"-20 & 3/8"-16 Mounting Threads
  • 3.5kg Load Capacity, Rubber Padding
  • Large Thumb-Lever Fastener
  • Aluminium & Stainless Steel Construction
In stock Ships tomorrow
You Pay: $31.95
(1) review
SAVE 15%
Manfrotto 026 Swivel Adapter

Manfrotto 026 Swivel Adapter

An adapter with the ability to rotate - supports up to 2.5kg
In stock Ships tomorrow
$89.99
You Pay: $75.95
$89.99
SAVE 25%
9.SOLUTIONS Savior Clamp

9.SOLUTIONS Savior Clamp

  • Load Capacity: 30 kg
  • Weighs 0.44 kg
  • 60 mm Jaw Opening
  • Accommodate odd shapes
In stock Ships tomorrow
$99.95
You Pay: $74.95
$99.95
SAVE 12%
SmallRig 4249 Super Clamp with ARRI Rosette Mount

SmallRig 4249 Super Clamp with ARRI Rosette Mount

  • 14mm-55mm clamping range
  • Features built-in 1/4"-20 threaded hole
  • Made of aircraft-grade aluminium alloy
  • Increased sturdiness and durability
In stock Ships tomorrow
$49.95
You Pay: $43.95
$49.95
SAVE $31
iFootage Spider Crab Vehicle Suction Cup VS-146

iFootage Spider Crab Vehicle Suction Cup VS-146

  • For Use with Spider Crab Vehicle Mount
  • Create Smooth Motion Shots on Vehicles
  • 1/4"-20 & 3/8"-16 Screws/Thread Mounts
  • 30 kg Maximum Payload
In stock Ships tomorrow
$236.00
You Pay: $205.00
$236.00
SAVE 31%
9.SOLUTIONS Python Clamp with 5/8" Pin

9.SOLUTIONS Python Clamp with 5/8" Pin

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • 5/8" Pin
  • 3/8"-16 (M10) Connection
In stock Ships tomorrow
$75.95
You Pay: $51.95
$75.95
Manfrotto 045 Background Triple Hooks

Manfrotto 045 Background Triple Hooks

A set of two background paper holders for three Expan 046.
In stock Ships in 1 - 2 working days
You Pay: $129.00
This item may be nonreturnable
SAVE 12%
Kupo KS-076 5/8" (16mm) Stud with 1/4"-20 Female

Kupo KS-076 5/8" (16mm) Stud with 1/4"-20 Female

  • Converts 1/4"-20 Stud to 5/8" Baby Stud
In stock Ships tomorrow
$7.95
You Pay: $6.95
$7.95
SAVE 12%
Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver

Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver

  • Eight Anchor Points
  • Metal Locking Knob
  • Chrome-Plated Steel Finish
In stock Ships tomorrow
$38.95
You Pay: $33.95
$38.95
SAVE 21%
Matthews Baby Ballhead Adapter

Matthews Baby Ballhead Adapter

  • Mounts Ball head to 5/8" or 1 1/8" Stud
In stock Ships tomorrow
$119.00
You Pay: $94.00
$119.00
SAVE 14%
Kupo KS-084 Quick Release Adapter (1/4"-20)

Kupo KS-084 Quick Release Adapter (1/4"-20)

  • 1/4"-20 Male to Male Adapter
  • Spring-Loaded Ball Bearing Mechanism
  • Accepts Four Different Top Mounts
In stock Ships tomorrow
$26.95
You Pay: $22.95
$26.95
SAVE 36%
9.SOLUTIONS Baby Pin Set

9.SOLUTIONS Baby Pin Set

Increase mounting utility to anything with a 3/8" thread
In stock Ships tomorrow
$51.95
You Pay: $32.95
$51.95
SAVE 14%
Kupo 838 Handcuff Clamp with T Handle (Silver)

Kupo 838 Handcuff Clamp with T Handle (Silver)

  • High Tensile 6061 Aluminium Extrusion
  • SWL: 440lbs / 200kg
  • TUV Approval
  • Rig Heavy Luminaries Quickly & Effortlessly
In stock Ships tomorrow
$47.95
You Pay: $40.95
$47.95
SAVE 25%
BIGSOFTI Universal Clip Accessory Mount for BIGSOFTI ONE

BIGSOFTI Universal Clip Accessory Mount for BIGSOFTI ONE

  • Lightweight Mount
  • Cold Shoe Mounting Foot with 1/4"-20
In stock Ships tomorrow
$27.95
You Pay: $20.95
$27.95
Impact Super Clamp with Ratchet Handle

Impact Super Clamp with Ratchet Handle

Versatile grip tool made of lightweight cast alloy
In stock Ships tomorrow
You Pay: $60.95
SmallRig 1610 1/4" to 3/8" Screw Adapter (5 pcs)

SmallRig 1610 1/4" to 3/8" Screw Adapter (5 pcs)

  • Female 1/4" Thread
  • Male 3/8" Thread
Usually ships in 3 - 4 weeks what does this mean?
You Pay: $5.95
(1) review
Manfrotto 035 Super Clamp without Stud

Manfrotto 035 Super Clamp without Stud

  • Lightweight cast alloy
  • Holds just about anything
  • Mount on any tube 13 - 55 mm
  • Jaw Opening of 1.3 - 5.3  cm
  • Stud not included
In stock Ships tomorrow
You Pay: $80.95
SAVE 32%
9.SOLUTIONS Savior Clamp Mini

9.SOLUTIONS Savior Clamp Mini

  • Load Capacity: 30 kg
  • Weighs 135 g
  • 30 mm Jaw Opening
In stock Ships tomorrow
$77.95
You Pay: $52.95
$77.95
(1) review
SAVE 28%
Manfrotto 039 U-Hook Holders

Manfrotto 039 U-Hook Holders

A set of two U-hooks that are ideal for cross poles.
In stock Ships tomorrow
$31.95
You Pay: $22.95
$31.95
SAVE $171
Avenger C339 Grab Clamp

Avenger C339 Grab Clamp

Zinc Steel Construction, 12.5 mm Hole, Load Capacity: 330 lb
In stock Ships tomorrow
$359.00
You Pay: $188.00
$359.00
SAVE $259
Fluotec Mounting Bracket with Stabilizer Arm for CineLight 120 Series

Fluotec Mounting Bracket with Stabilizer Arm for CineLight 120 Series

Available to order from Rubber Monkey Today.
In stock Ships tomorrow
$349.00
You Pay: $90.00
$349.00
Manfrotto 035C Super Clamp without Stud (Ratchet version)

Manfrotto 035C Super Clamp without Stud (Ratchet version)

  • Securely mounted on any tube from 13 to 45 mm
  • Equipped with ratchet handle
  • Universal 1/4'' thread attachment
  • Attachment is 5/8'' hexagonal socket
In stock Ships tomorrow
You Pay: $86.95
(1) review
SmallRig 2058 Super Clamp with 1/4" and 3/8" Thread (2pcs Pack)

SmallRig 2058 Super Clamp with 1/4" and 3/8" Thread (2pcs Pack)

Can be mounted onto anything like cameras, lights, umbrellas, hooks, shelves, Lightweight and durable, Equipped with 1/4’’ and 3/8’’ threaded holes
In Stock with Supplier Usually ships in 2 - 4 weeks what does this mean?
You Pay: $19.95
(1) review
Kupo KCP-200B 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)

Kupo KCP-200B 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)

  • Aluminium & Steel
  • Four V-Shaped Jaws
  • Handle With Roller Bearings
  • Non-Slip Aluminium Friction Disc
In stock Ships tomorrow
You Pay: $45.95
(1) review
SmallRig 735 Super Clamp w/ 1/4" and 3/8" Thread

SmallRig 735 Super Clamp w/ 1/4" and 3/8" Thread

Mount onto cameras, lights, umbrellas and more
In Stock with Supplier Usually ships in 2 - 4 weeks what does this mean?
You Pay: $14.95
(1) review
Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)

Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)

  • For Super Clamp System
  • Replaces #2907
In stock Ships tomorrow
You Pay: $18.95
Kupo KS-054 3/8"-16 Male to 1/4"-20 Male Thread Adapter

Kupo KS-054 3/8"-16 Male to 1/4"-20 Male Thread Adapter

  • Conversion Adapter
In stock Ships tomorrow
You Pay: $6.95
Kupo KCP-600 Super Viser Clamp (End Jaw, 10cm)

Kupo KCP-600 Super Viser Clamp (End Jaw, 10cm)

  • Steel and Aluminium Construction
  • 30kg Load Capacity
  • Hex Receiver and 5/8" Knurled Pin
In stock Ships tomorrow
You Pay: $80.95
Tether Tools Rock Solid "A" Clamp (2", Black)

Tether Tools Rock Solid "A" Clamp (2", Black)

  • Ideal clamp pressure for light clamping and speedy application and removal.
  • Jaw opening: 2″ (5cm).
  • Nickel plated steel jaws.
  • Heavy-duty tempered steel springs.
  • Polyvinyl handles and tips.
  • Point-of-pressure remains near jaw.
  • Clamping Strength = 10KG / 22.7lbs.
In stock Ships tomorrow
You Pay: $19.95
Manfrotto 014-38 Rapid Adapter

Manfrotto 014-38 Rapid Adapter

  • 3/8'' screw
  • 5/8'' (16mm) socket
  • Aluminium
In stock Ships tomorrow
You Pay: $33.95
Manfrotto 123 Pivoting Boom Clamp for Super & Heavy Duty Boom

Manfrotto 123 Pivoting Boom Clamp for Super & Heavy Duty Boom

  • Pivoting clamps
  • For super/heavy duty booms
  • Use with 35 mm diameter boom shafts
In Stock with Supplier Usually ships in 4 - 6 working days what does this mean?
You Pay: $179.00
SAVE 19%
Nanlite PavoTube II 6C Coupler

Nanlite PavoTube II 6C Coupler

  • 1/4 20" Male to Male Adapter
  • Mount Multiple PavoTube II 6C's Together
In stock with supplier Usually ships in 2 - 3 working days what does this mean?
$9.95
You Pay: $8.00
$9.95
Manfrotto Column Clamp (349)

Manfrotto Column Clamp (349)

  • Accepts 190 & 055 Series Columns
  • Replaces #3424
In Stock with Supplier Usually ships in 4 - 6 working days what does this mean?
You Pay: $219.00
Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread

Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread

  • Allows Stand Mounting
  • Spring-Loaded Locking Knob
In stock Ships tomorrow
You Pay: $16.95
Manfrotto 088 Thread Adapter

Manfrotto 088 Thread Adapter

Converts a female 1/4 inch screw to a male 3/8 inch thread.
In stock Ships tomorrow
You Pay: $13.95
(1) review
9.SOLUTIONS Savior Clamp with 5/8" Stud

9.SOLUTIONS Savior Clamp with 5/8" Stud

  • Load Capacity: 29.9 kg
  • Weighs 0.45 kg
  • 5.9 cm Jaw Opening
In stock Ships tomorrow
You Pay: $109.00
Manfrotto 148KN Reducing Bushing Set

Manfrotto 148KN Reducing Bushing Set

Convert a 3/8 inch screw and a 1/4 inch female thread - 5 set
In stock Ships tomorrow
You Pay: $15.95
K&M 216 Thread Adapter 5/8" 27 Gauge Female Thread to 3/8" Male Thread

K&M 216 Thread Adapter 5/8" 27 Gauge Female Thread to 3/8" Male Thread

For Microphone Mounts and Stands
In stock Ships tomorrow
You Pay: $12.95
(2) reviews
Kupo KS-046 Baby 3" Wall Plate, Baby 5/8" Stud

Kupo KS-046 Baby 3" Wall Plate, Baby 5/8" Stud

  • Eight Anchor Points
  • Chrome-Plated Steel Finish
In stock Ships tomorrow
You Pay: $31.95
Impact Female 1/4"-20 to Male 3/8" Thread Adapter

Impact Female 1/4"-20 to Male 3/8" Thread Adapter

Brass female to male thread adapter
In Stock with Supplier Usually ships in 4 - 6 working days what does this mean?
You Pay: $11.95
(1) review
Manfrotto 147 Adapter Spigot  3/8" + 1/4"

Manfrotto 147 Adapter Spigot 3/8" + 1/4"

A brass spigot with a 3/8 inch and a 1/4 inch screw.
In stock Ships tomorrow
You Pay: $12.95
Impact CA-106 Junior to Baby Pin Adapter

Impact CA-106 Junior to Baby Pin Adapter

1 1/8" (28 mm) and 5/8" (16 mm) spigots
In Stock with Supplier Usually ships in 4 - 6 working days what does this mean?
You Pay: $45.95
Impact 1/4"-20 To 1/4"-20 Adapter Spigot

Impact 1/4"-20 To 1/4"-20 Adapter Spigot

Male 1/4"-20 to male 1/4"-20 adapter
In Stock with Supplier Usually ships in 4 - 6 working days what does this mean?
You Pay: $13.95
SmallRig 2220 Super Clamp

SmallRig 2220 Super Clamp

The jaw is fitted with rubber pads on the inside removing the wear and tear of the rod it clamps on. The clamp can open 10 to 55 mm.
In Stock with Supplier Usually ships in 2 - 4 weeks what does this mean?
You Pay: $46.95
Impact Rapid Baby to 1/4"-20 Male Threaded Adapter

Impact Rapid Baby to 1/4"-20 Male Threaded Adapter

For mounting of a light fixture, flash, or camera
In Stock with Supplier Usually ships in 4 - 6 working days what does this mean?
You Pay: $23.95
(1) review
Kupo KS-017 Universal 5/8" Stud, 3/8"-16 M & 1/4"-20 M Threads

Kupo KS-017 Universal 5/8" Stud, 3/8"-16 M & 1/4"-20 M Threads

  • Double-Sided Stud
  • Fits into Any 5/8" Receiver
In stock Ships tomorrow
You Pay: $10.95
(1) review
SmallRig 828 Double Head Stud with 1/4" to 1/4" thread

SmallRig 828 Double Head Stud with 1/4" to 1/4" thread

Available to order today
In Stock with Supplier Usually ships in 2 - 4 weeks what does this mean?
You Pay: $7.95
Kupo KCP-411 Off-Set Female Baby Mounting Adapter - Kino Adapter
You Pay: $60.95
Titan Heavy Duty Metal Clamp (Grey)

Titan Heavy Duty Metal Clamp (Grey)

  • 4cm maximum clamping range
  • Perfect for hanging backgrounds
  • Metal construction
In stock Ships tomorrow
You Pay: $6.95

1 2 3 4 5 Next >