COVID-19 Update: Our branches are open for contactless pickups only. Orders continue to ship from our warehouse but may experience some delivery delays.
DPA d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (
Product #75650 | SKU FIDB00-2-IE1-B
Special Order Usually ships in 2 -3 days
0.0 (no ratings yet) Thanks for your rating!


DPA d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (

Product #75650 | SKU FIDB00-2-IE1-B
Special Order Usually ships in 2 -3 days


Product Features
  • Dual-Ear Mount & Single In-Ear Monitor
  • 120mm Boom
  • Directional Microphone
  • 20 Hz to 20 kHz Frequency Range
  • Connector
Customer Reviews
0.0 (no ratings yet) Thanks for your rating!
Email me when stock arrives
Product Details
  • Product: #75650
  • SKU: FIDB00-2-IE1-B
Our Price $1,299.00
- +
or apply for 12 months interest free with

Delivery - $6.90*
2 -3 days
Pickup AUCKLAND
2 -3 days
Pickup WELLINGTON
2 -3 days
*estimated shipping to Auckland

Related Products
Pearstone 0.5 x 8" Touch Fastener Straps (Multi-Colored, 10-Pack) Pearstone 0.5 x 8" Touch Fastener Straps (Multi-Colored, 10-Pack)
Pearstone 0.5 x 6" Touch Fastener Straps (Black, 10-Pack) Pearstone 0.5 x 6" Touch Fastener Straps (Black, 10-Pack)
Pearstone 1 x 9" Touch Fastener Cable Straps (Multi-Colored, 10-Pack) Pearstone 1 x 9" Touch Fastener Cable Straps (Multi-Colored, 10-Pack)
Pearstone 1 x 18" Touch Fastener Cinch Strap (Black, 2-Pack) Pearstone 1 x 18" Touch Fastener Cinch Strap (Black, 2-Pack)
Audio Technica AT8439 Clothing Clip for Cable Audio Technica AT8439 Clothing Clip for Cable
DPA Microphones DAD6034 MicroDot to Locking 1/8" Mini Connector DPA Microphones DAD6034 MicroDot to Locking 1/8" Mini Connector
Rycote - White Lavalier Windjammer Rycote - White Lavalier Windjammer
Rycote - Grey Lavalier Windjammer Rycote - Grey Lavalier Windjammer

Description

The black d:fine In-Ear Broadcast Headset Microphone from DPA is a dual-ear mount, single in-ear, broadcast and communication headset microphone, which is lightweight and allows you to monitor audio in one ear. It can be used in several environments for applications such as broadcast TV, radio hosts, sports announcers, producers, theatre actors, singers, and more.

The In-Ear Broadcast Headset Microphone features in-ear drivers that allow no audio leakage to the microphone capsule. The cable steer, located at the headset mount, controls the cable run down the neck, so you can adjust the headset mount size and choose between left and right ear orientation.

DPA's spring steel construction integrates the cable within the earhook of the headset so that it mounts quickly and comfortably to fit any ear size. With low noise and high sensitivity, this headset mic delivers a natural sound. In addition, the in-ear monitors also deliver clear communication. The In-Ear Broadcast Headset Microphone has a 1/8" mini-jack connector for the in-ear driver.

Key Features:

  • MicroDot connector
  • Mic and in-ear monitor integrated in one solution
  • Easy to mount with minimum cable clutter
  • The microphone cable can be changed independently of the headset mount

Specifications

Directional Characteristic Directional
Principle of Operation Pressure gradient
Cartridge Type Pre-polarised condenser
Frequency Range 20 Hz - 20 kHz
Frequency Range ± 2 dB: 0.8 to 1.2" (2-3 cm)
100 Hz to 20 kHz with 3 dB soft boost at 8 to 20 kHz
Sensitivity Nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent Noise Level A-Weighted: Typ. 28 dB (A) re. 20 µPa (max. 30 dB (A))
ITU-R BS.468-4: Typ. 40 dB (max. 42 dB)
Signal to Noise Ratio A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB (A)
Total Harmonic Distortion (THD)
Dynamic Range Typ. 95 dB
Maximum SPL 144 dB
Output Impedance From MicroDot: 30 - 40 ohms
From DAD6001-BC: 100 ohms
Cable Drive Capability Up to 984' (300 m) with DAD6001-BC XLR adapter
Output Balance Principle Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Current Consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter
Connector MicroDot connector
Boom Length Microphone: Standard: 4.7" (120 mm)
Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electro Magnetic Compatibility Fully compatible
Temperature Range -40 to 113°F (40 to 45°C)
Relative Humidity Up to 90%
Cable Diameter Microphone Cable: 0.06" (1.6 mm)
In-Ear Cable: 0.08" (1.95 mm)
Cable Length 4.3' (1.3 m)
Weight 0.92 oz (26 g)
In-Ear Broadcast Headset
Type Dynamic earplug (acknowledged Hi-Fi plugs)
Connector 1/8" (3.5 mm) stereo mini-jack
In-Ear Type Single: Signal at mini-jack tip
Dual: Signal at mini-jack tip (left) and ring (right)
Sensitivity 107 dBV
Impedance Nominal: 18 ohms

In The Box

  • DPA Microphones d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (Black)
  • Ear Adapters

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review
Details
  • Product: DPA d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (
  • Manufacturer: DPA Microphones
  • Model: FIDB00-2-IE1-B
  • SKU: FIDB00-2-IE1-B
  • RM Product #: 75650
  • Length Meters: 1.3 m
  • Length Feet: 4.3 ft