DPA d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (Beige)
Features
- Dual-Ear Mount & Single In-Ear Monitor
- 120mm Boom
- Directional Microphone
- 20 Hz to 20 kHz Frequency Range
- Connector
Related Products
Description
The beige d:fine In-Ear Broadcast Headset Microphone from DPA is a dual-ear mount, single in-ear, broadcast and communication headset microphone, which is lightweight and allows you to monitor audio in one ear. It can be used in several environments for applications such as broadcast TV, radio hosts, sports announcers, producers, theatre actors, singers, and more.
The In-Ear Broadcast Headset Microphone features in-ear drivers that allow no audio leakage to the microphone capsule. The cable steer, located at the headset mount, controls the cable run down the neck, so you can adjust the headset mount size and choose between left and right ear orientation.
DPA's spring steel construction integrates the cable within the earhook of the headset so that it mounts quickly and comfortably to fit any ear size. With low noise and high sensitivity, this headset mic delivers a natural sound. In addition, the in-ear monitors also deliver clear communication. The In-Ear Broadcast Headset Microphone has a 1/8" mini-jack connector for the in-ear driver.
Key Features:
- MicroDot connector
- Mic and in-ear monitor integrated in one solution
- Easy to mount with minimum cable clutter
- The microphone cable can be changed independently of the headset mount
Specifications
| Directional Characteristic | Directional |
| Principle of Operation | Pressure gradient |
| Cartridge Type | Pre-polarised condenser |
| Frequency Range | 20 Hz - 20 kHz Frequency Range ± 2 dB: 0.8 to 1.2" (2-3 cm) 100 Hz to 20 kHz with 3 dB soft boost at 8 to 20 kHz |
| Sensitivity | Nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa |
| Equivalent Noise Level | A-Weighted: Typ. 28 dB (A) re. 20 µPa (max. 30 dB (A)) ITU-R BS.468-4: Typ. 40 dB (max. 42 dB) |
| Signal to Noise Ratio | A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB (A) |
| Total Harmonic Distortion (THD) | |
| Dynamic Range | Typ. 95 dB |
| Maximum SPL | 144 dB |
| Output Impedance | From MicroDot: 30 - 40 ohms From DAD6001-BC: 100 ohms |
| Cable Drive Capability | Up to 984' (300 m) with DAD6001-BC XLR adapter |
| Output Balance Principle | Signal balanced with DAD6001-BC XLR adapter |
| Common Mode Rejection Ratio | >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter |
| Current Consumption | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter |
| Connector | MicroDot connector |
| Boom Length | Microphone: Standard: 4.7" (120 mm) |
| Polarity | +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter) |
| Electro Magnetic Compatibility | Fully compatible |
| Temperature Range | -40 to 113°F (40 to 45°C) |
| Relative Humidity | Up to 90% |
| Cable Diameter | Microphone Cable: 0.06" (1.6 mm) In-Ear Cable: 0.08" (1.95 mm) |
| Cable Length | 4.3' (1.3 m) |
| Weight | 0.92 oz (26 g) |
| In-Ear Broadcast Headset | |
| Type | Dynamic earplug (acknowledged Hi-Fi plugs) |
| Connector | 1/8" (3.5 mm) stereo mini-jack |
| In-Ear Type | Single: Signal at mini-jack tip Dual: Signal at mini-jack tip (left) and ring (right) |
| Sensitivity | 107 dBV |
| Impedance | Nominal: 18 ohms |
In The Box
- DPA Microphones d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (Beige)
- Ear Adapters
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DPA d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (Beige)
- Manufacturer: DPA Microphones
- Model: FIDF00-2-IE1-B
- SKU: FIDF00-2-IE1-B
- RM Product #: 75648
- Length Meters: 1.3 m
- Length Feet: 4.3 ft
Recently Viewed
View AllDPA d:fine In-Ear Broadcast Headset Mic, 2-Ear Mount, 1-In-Ear with MicroDot Connector (Beige)
