JBL JRX 225 Loudspeaker System
Product #7450
SKU JRX225
0.0 (no ratings yet) Thanks for your rating!
Usually ships in 2 - 3 weeks


JBL JRX 225 Loudspeaker System

Product #7450 | SKU JRX225 | 0.0 (no ratings yet) Thanks for your rating!
Usually ships in 2 - 3 weeks

Product Features
  • For Live Stage, Theatre, DJ Setups
  • 2 x 15"(38.1 cm) Woofers
  • 500 to 1000 W into 4 Ohms
  • 42 Hz to 18 kHz Frequency Range
  • Aids in Providing Low-End Without Sub
Our Price $1,069.00
- +
Interest Free Monthly payments from $187.33


Email me when stock arrives

Suitable for live-music performances and DJ setups, the  JRX225 from JBL provides dual 15"(38.1 cm) woofers, and thus, offers much in the way of low-end without muddying up the midrange of your signal, providing a solid solution if you're looking for a speaker capable of reproducing thick, lower frequencies without a subwoofer. It can handle between 500 and 1000 W into 4 Ohms, and it provides SpeakON and 1/4" TS phone jacks. The JRX225 offers other features such as a rugged 19 mm MDF enclosure, steel handles, and a perforated steel grille. Its high-frequency driver is protected by SonicGuard technology, while its waveguide provides coverage control, minimised distortions, and an even frequency response.

Key Features

  • Dual JBL low-frequency drivers with a 2.5"(6.35 cm)-diameter edgewound-ribbon voice coil
  • JBL 2414H-C 1"(2.5 cm)-polymer-diaphragm compression driver
  • Crossover design shapes frequency response, delivering coherent summation in the crossover region
  • "Quasi 3-Way" design provides low-end without sacrificing performance in the critical midrange; the upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only, thus resulting in a reduction of midrange phase cancellation
  • High-voltage capacitors and inductors with cores and heavy-gauge wire enable the crossover network to handle high power without saturating
  • High-frequency waveguide provides coverage control, reduced distortion, and smooth frequency response
  • The rugged, acoustically efficient enclosure is constructed from 19 mm MDF (Medium Density Fibreboard) to ensure durability and low-frequency performance
  • SonicGuard protects the high-frequency driver from excess power without interrupting performance
  • Non-resonant, all-steel handles
  • 18-gauge perforated steel grille protects components from damage
Power Rating 500 / 2000 W
Frequency Range At -10 dB : 42 Hz to 18 kHz
Frequency Response At ±3 dB : 62 Hz to 13 kHz
Sensitivity 100 dB SPL (1 W / 1 m) (@1 m)
Nominal Impedance 4 Ohms
Amplifier Power 500 to 1000 W into 4 Ohms
Maximum SPL 133 dB
Nominal Dispersion: 90 x 50º
Crossover Frequency 2.2 kHz
High-Frequency Driver JBL 2414H-C 1" / 25 mm-polymer-diaphragm compression driver mounted on Progressive-Transition Waveguide
Low-Frequency Driver 2 x JBL M128
Input Connectors 1 x Neutrik Speakon NL-4; 1/4" / 6.35 mm
1 x TS phone jack; parallel
Dimensions (H x W x D) 43.0 x 18.3 x 16.8" / 109.2 x 46.4 x 42.6 cm
Weight 42.6 kg

In The Box

  • JBL JRX 225 Loudspeaker System

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

In The Box

  • JBL JRX 225 Loudspeaker System

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review
Product:
JBL JRX 225 Loudspeaker System
Manufacturer:
JBL
Model:
JRX225
SKU:
JRX225
RM Product #:
7450