Mackie Producer Bundle USB Audio/MIDI Interface, Condenser Mic, Dynamic Mic, and Headphones
Features
- Onyx Producer 2·2 USB Interface
- MC-100 Headphones with 1/4" Adapter
- EM-91C Large-Diaphragm Condenser Mic
- EM-89D Handheld Dynamic Vocal Mic
- Up to 24-Bit / 192 kHz Resolution
Related Products
Description
The Mackie Producer Bundle USB Audio/MIDI Interface, Condenser Mic, Dynamic Mic, and Headphones is a USB audio/MIDI interface designed for high-resolution recording and monitoring in home and project studios. With its dual Onyx microphone preamps, combo XLR-1/4" inputs, and 5-pin MIDI I/O, the unit is particularly suitable for singer-songwriters and producers who make use of MIDI instruments and MIDI hardware. In your own project studio, you'll be able to connect to your monitors by means of the 1/4" jacks located on the rear of the unit.
The interface is relatively lightweight at 1.4 lb and provides a 1/4" headphone output, so you can take it with you wherever you go. Mackie's all-metal chassis hardware design aids in this endeavour, giving you a robust, roadworthy chassis for the circuitry inside. Should you monitor through headphones, a direct monitor knob is provided, which mitigates any latency as you record your audio. At minimum value, the knob ensures that you hear your direct input from the preamps. At maximum, you'll hear the signal as it's routed through the DAW. Use the knob to blend between the two extremes if you wish. The unit is designed to connect to your Mac or Windows computer over USB, and is bus powered by the host computer.
Key Features:
Analogue Circuitry
The Onyx Producer 2·2 delivers high headroom and low noise by means of its analogue circuitry, including its Onyx mic preamps.
5-Pin DIN MIDI I/O
Two 5-pin MIDI jacks are provided—one for accepting MIDI signals and another for outputting MIDI to compatible devices.
Direct Monitoring
A true analogue monitoring path allows you to hear audio directly from the preamps as you record, so you can eliminate the latency of hearing the audio through your DAW. The knob allows you to blend between direct monitoring and listening off your DAW.
Bus Powered
The interface features connectivity over USB 2.0 for fast data transfers and minimal latency. It's also bus powered through this port, meaning no external power is required. The unit is compatible with Core Audio and ASIO drivers.
All-Metal Chassis Design
The Onyx Series Producer gives you an all-metal enclosure and heavy-duty potentiometers, as well as a robust internal construction.
Key Features at a Glance
- Dual Onyx mic preamps
- Combo XLR-1/4" TRS inputs accept mic, line, or instrument sources
- One Hi-Z switch per channel
- +48V phantom power for use with condenser mics
- 2x2 interface recording up to 24-bit / 192 kHz
- Zero-latency direct monitoring of analogue inputs
- Dedicated 1/4" TRS outputs for connecting studio monitors
- MIDI I/O for connecting synths, controllers and more
- 1/4" headphone output
- Bus powered for easy mobile recording with no power adapter needed
- USB 2.0 connectivity for fast transfer speed and low latency
- All-metal enclosure design to survive day-to-day abuse
- Compatible with all major DAWs on Mac or Windows
Specifications
| Interface | |
| Channels of I/O | Analogue: 2 Inputs / 2 Outputs at 192 kHz |
| Max Sample Rate/Resolution | 192 kHz / 24-Bit |
| Display and Indicators | 2 x LEDs (Clip, Signal) 1 x LED (Host Connection) 1 x LED (MIDI) |
| Connectivity | |
| Host Connection | 1 x USB Type-B (USB 2.0) |
| Analogue I/O | 2 x Combo XLR-1/4" TRS Balanced Mic Input 1 x 1/4" TRS Unbalanced Headphone Output 2 x 1/4" TRS Balanced Monitor Output |
| Phantom Power | +48 V |
| Digital I/O | None |
| MIDI I/O | 1 x MIDI 5-Pin In 1 x MIDI 5-Pin Out |
| Memory Card Slot | None |
| Performance | |
| Frequency Response | Inputs, Outputs: 20 Hz to 20 kHz ±0.5 dB (Min Gain) |
| Max Input Level | Mic Inputs: +11 dBu (Min Gain) Line/Hi-Z Inputs: +24 dBu (Min Gain) |
| Max Output Level | Monitor Outputs: +10 dBu Headphone Outputs: +10 dBu |
| THD | Mic Inputs: Line/Hi-Z Inputs: Monitor Outputs: Headphone Outputs: |
| EIN | Mic/Line/Hi-Z Inputs: < -100 dB Monitor Outputs: < -85 dBu Headphone Outputs: < -75 dBu |
| Digital Audio | |
| Sample Rates | Up to 192 kHz |
| Bit Depth | Up to 24-Bit |
| Sync Sources | Internal |
| Compatibility | |
| OS Compatibility | macOS Windows |
| Required Hardware | Available USB 2.0 Port |
| Power | |
| Power Requirements | USB Bus Power |
| Physical | |
| Anti-Theft Features | Kensington Security Slot |
| Dimensions | 7.4 x 4.49 x 2.01" / 18.8 x 11.4 x 5.1 cm |
| Weight | 1.4 lb / 0.6 kg |
| Microphone | |
| Form Factor | Handheld / Stand/Boom Mount |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Dynamic |
| Polar Pattern | Cardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Built-In |
| Performance | |
| Frequency Range | 50 Hz to 16 kHz |
| Impedance | 600 Ohms ± 30% at 1 kHz |
| Sensitivity | -52 dBV/Pa at 1 kHz |
| Connectivity | |
| Output Connectors (Analogue) | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
| Number of Conductors | 2 |
| Power | |
| Operating Voltage | Not Specified by Manufacturer |
| Physical | |
| Colour | Black |
| Mounting | Mic Clip (Included) |
| Dimensions | ø: 2 x L: 7.3" / ø: 5.08 x L: 18.54 cm |
| Weight | 0.66 lb / 0.3 kg |
| Microphone | |
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Condenser |
| Polar Pattern | Cardioid |
| Orientation | Side Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Built-In |
| Performance | |
| Frequency Range | 20 Hz to 18 kHz |
| Maximum SPL | 134 dB SPL (1 kHz, 1% THD) |
| Impedance | 150 Ohms ± 30% at 1 kHz |
| Sensitivity | -30 dBV/Pa at 1 kHz |
| Signal-to-Noise Ratio | 78 dB |
| Equivalent Noise Level | 16 dB A-Weighted |
| Connectivity | |
| Output Connectors (Analogue) | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
| Number of Conductors | 2 |
| Power | |
| Operating Voltage | 48 V |
| Physical | |
| Colour | Black |
| Mounting | Shockmount (with Included Hardware) |
| Dimensions | ø: 1.9 x L: 6.1" / ø: 4.83 x L: 15.49 cm |
| Weight | 0.46 lb / 0.21 kg |
In The Box
- Mackie Onyx Producer 2·2 USB Audio/MIDI Interface
- Mackie EM-89D EleMent Series Dynamic Vocal Microphone
- Mackie EM-91C EleMent Series Large-Diaphragm Condenser Microphone
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Mackie Producer Bundle USB Audio/MIDI Interface, Condenser Mic, Dynamic Mic, and Headphones
- Manufacturer: Mackie
- Model: Producer Bundle
- SKU: MACPRODUCER
- RM Product #: 76145
Recently Viewed
View AllMackie Producer Bundle USB Audio/MIDI Interface, Condenser Mic, Dynamic Mic, and Headphones
