Shotgun Wind Protection
Sennheiser MKE400 Foam Windscreen - Replacement
- For MKE400 shotgun microphone
- Replacement windscreen
In stock
Ships Monday
$13.95
You Pay:
$10.95
$13.95
Rode DeadCat VMPR Artificial Fur Wind Shield
- For VideoMic Pro with Lyre Shock-Mount
- Minimises Wind-Noise
- Acoustically Transparent
In stock
Ships Monday
$79.95
You Pay:
$54.95
$79.95
Rycote Mini Windjammer for Canon XF300 / XF305 HD Camcorders
- Provides 30 dB Wind-Noise Reduction
- Easy-Fitting, Slip-On Design
- Made from Synthetic Fur
- Absorbs the Impact from Wind
- Great for Recording Outside
- Compatible with Canon XF300 and XF305
In stock
Ships Monday
$65.95
You Pay:
$55.95
$65.95
Comica Audio CVM-MF2 Furry Windscreen Muff
- For CVM-V30 LITE Microphone.
- Made of High-Quality Artificial Fur.
- Reduces Noise When Recording Outdoors.
- Fits over Most Small Camera Microphones.
In stock
Ships Monday
$13.95
You Pay:
$12.95
$13.95
BOYA BY-B03 Fur Windscreen for Shotgun Microphones
- Reduces wind noise
- With elastic cord at the opening for free adjustment
In stock
Ships Monday
$20.95
You Pay:
$13.95
$20.95
Rode V2 Blimp System
- Protection from Wind Noise
- Isolates From Shock and Vibration
- Fits NTG1, NTG2, NTG3, NTG4 and NTG4+
- Fits Any Shotgun Mic up to 32.4 cm
- Integrated Mogami Mic Cable
In stock
Ships Monday
You Pay:
$439.00
Rode Long Shotgun Blimp Extension Kit
- Allows use of long shotgun microphones
- Add-on component kit
- 265 mm blimp extension piece
In stock
Ships Monday
$149.00
You Pay:
$109.00
$149.00
$299.00
You Pay:
$209.00
$299.00
BOYA BY-P240 Microphone Windshield (24cm)
- Reduces wind noise
- Compatible with the BOYA BY-PVM1000L and similar sized microphones
In stock
Ships Monday
$64.95
You Pay:
$41.95
$64.95
Saramonic Vmic5 Pro Super-cardioid Shotgun Microphone
- Super-cardioid polar pattern
- Built-in battery with automatic power On/Off; USB-C charging
- Two-stage High-pass filter (75Hz /150 Hz)
- Three-level output control (-10dB, 0dB, +20dB)
- High-frequency boost (5dB)
In stock
Ships Monday
$409.00
You Pay:
$289.00
$409.00
Rycote Micro Windjammers (6-Pack, 30 Stickies)
- Compatible w/DSLRs & Compact Cameras
- Cuts Wind Noise on Built-in Microphones
- Also Fits Mobile Phones, iPads
- Set of 6
In stock
Ships Monday
You Pay:
$28.95
Rode WS7 Deluxe Windshield
- Fits the Rode NTG3 Shotgun Microphone
- Soft Wind-Muff Texture
- Excellent Wind Noise Protection
In stock
Ships Monday
You Pay:
$119.00
Rode Dead Cat VMP+
- For VideoMic Pro+
- Deluxe furry wind cover
- Designed to reduce wind noise
- Rubber base
- Open-cell foam with artificial fur
In stock
Ships Monday
You Pay:
$69.95
Rycote Shotgun Mic Foam and Windjammer Combo (18cm, ME66)
Open Cell Foam: 10 dB Attenuation, Windjammer: 12 dB Attenuation
In stock
Ships Monday
You Pay:
$94.95
Rode Dead Cat - Videomic, NTG1, NTG2
- For the Rode NTG1 and NTG2
- Zip on Wind Muff
- Works with the Rode VideoMic
In stock
Ships Monday
You Pay:
$64.95
Sennheiser MZW66 Foam Windscreen
Provides protection against wind noise for the ME66 microphone.
In stock
Ships Monday
You Pay:
$62.95
JOBY Wavo Windjammer (Grey)
- Fits over Existing Foam Windscreen of Wavo
- Materials Specially Designed for Wind Noise Isolation
Available from supplier
Usually ships in 1 - 2 weeks
$55.95
You Pay:
$43.95
$55.95
Comica Audio CVM-MF3 Microphone Wind Muff
- For Comica VM10II and Rode Video Micro.
- Made of High-Quality Artificial Fur.
- Reduces Wind Noise When Recording.
In stock
Ships Monday
You Pay:
$13.95
Boya BY-WS1000 Blimp Windshield and Suspension System for Shotgun Microphones
- Effectively Reduces Wind Noise
- Isolates Mic from Shock and Vibration
- Fits Mics from 20 to 22mm in Diameter
- For Shotgun Mics up to 32 cm Long
- Integrated Coiled XLR Cable
Estimated stock due 1st of July
You Pay:
$149.00
Rode WS12 Deluxe Windshield for VideoMic GO II
- Fits Rode VideoMic GO II Microphone
- Pro-Grade Design
- Minimises Wind Noise and Plosives
- Open-Cell Foam and Synthetic Fur
- Wind Seal Blocks Unused Sockets
On Backorder
You Pay:
$55.00
You Pay:
$99.00
Audio Technica AT8132 Shotgun Microphone Windscreen
- Reduces wind noise
- For AT835ST microphone
Available from supplier
Usually ships in 2 - 3 working days
You Pay:
$26.95
Audio Technica Windshield AT8133
Shotgun Foam Windscreen
Available from supplier
Usually ships in 2 - 3 working days
You Pay:
$44.95
Shure Fur Windjammer for VP83 and VP83F LensHopper Microphones
- Synthetic Fur Cover
- Up to 25dB of Wind Noise Reduction
- Developed by Shure with Rycote
- Fits VP83 & VP83F Model Mics
Special Order
Usually ships in 8 - 12 Weeks
You Pay:
$149.00
Rycote Standard Hole Classic Softie Wind-Screen (180mm Long, 18 to 20mm Diameter Hole, Gray)
- Measures 180mm Long
- Standard Hole Diameter 18 to 20mm
Usually ships in 8 - 12 Weeks
You Pay:
$179.00
Rode DeadCat GO Artificial Fur Wind Shield for the VideoMic GO
- Furry Wind Cover for the VideoMic GO
- Minimises Wind Noise
Usually ships in 4 - 6 weeks
You Pay:
$51.95
Rycote - Sennheiser MKE400 Mini Windjammer
A windjammer suitable for Sennheiser MKE400 recorders.
Usually ships in 8 - 12 Weeks
You Pay:
$65.95
Rycote Super-Shield Kit for Shotgun Mics (Small)
For Shotgun Microphones up to 20cm in Length
Usually ships in 8 - 12 Weeks
You Pay:
$709.00
Rode Dead Cat - Videomic Pro
Rode DeadCat VMP Wind Muff for VideoMic Pro
Usually ships in 4 - 6 weeks
You Pay:
$79.95
Rycote Standard Hole Classic Softie Wind-Screen (150mm Long, 18 to 20mm Diameter Hole, Gray)
- Measures 150mm Long
- Standard Hole Diameter 18 to 20mm
Usually ships in 8 - 12 Weeks
You Pay:
$189.00
Rycote Mini Windjammer for Rode Videomic Go
For Rode Videomic Go Shotgun Mic, Easy-To-Fit Slip On
Usually ships in 8 - 12 Weeks
You Pay:
$65.95
Saramonic VWS Windshield and Suspension System for Shotgun and Pencil Microphones
- Enables Clean Audio in Extreme Weather
- Holds One Shotgun or Pencil Microphone
- For 0.75 to 0.91" Microphone Diameters
- Accommodates Mic Lengths up to 14.9"
Usually Ships in 4 - 6 Weeks
You Pay:
$327.00
Rycote BBG Basket Windshield
- Great windshielding, in a smaller package
- Perfect for hand-held operations and interviews
- Optional Windjammer available for windiest conditions
Usually ships in 8 - 12 Weeks
You Pay:
$219.00
Rycote Nano Shield Windshield Kit NS4-DB for Microphones up to 256mm Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
- Mix-and-Match Basket Design
Usually ships in 8 - 12 Weeks
You Pay:
$1,265.00
Sennheiser Fur Windshield for MKE 440 Stereo Shotgun Microphone
- For MKE 440 Stereo Microphone
- Reduces Wind Noise
- Simulated Fur Windshield
Usually ships in 4 - 6 weeks
You Pay:
$99.00
Rycote BBG Windjammer
- Synthetic Fur Cover
- Works with Mono BBG Windshields
- Protects against Extreme Wind Noise
- Up to 50 dB of Wind-Noise Attenuation
Usually ships in 8 - 12 Weeks
You Pay:
$109.00
Rycote Classic-Softie Camera Kit for Shotgun Microphones (15cm)
An all-in-one kit for using your camera mounted shotgun microphone
Usually ships in 8 - 12 Weeks
You Pay:
$349.00
Rycote Shotgun Mic Foam and Windjammer Combo (12cm, Standard Hole)
Open Cell Foam: 10 dB Attenuation, Windjammer: 12 dB Attenuation
Usually ships in 8 - 12 Weeks
You Pay:
$94.95
Rycote 15cm Super-Softie Wind Shield for Shotgun Mics
For Mics Up to 15cm Long & 19-22mm Diam
Usually ships in 8 - 12 Weeks
You Pay:
$239.00
Rycote 104401 18cm Standard Hole SGM Foam (10-Pack)
Foam windscreen is designed to avoid high-frequency roll-off
Usually ships in 8 - 12 Weeks
You Pay:
$349.00
Rode WS-VM Windshield for Rode Shotgun
Suitable for Rode NTG1, NTG2 & VideoMic
Usually ships in 4 - 6 weeks
You Pay:
$29.95
Zoom WSS-6 Foam Windscreen for SGH-6 AND SSH-6 Shotgun Microphone Capsules
Reduces Wind Noise, Protects Mic from Moisture and Dirt, Reduces Vocal Plosives
Availability on Request
You Pay:
$15.95
Sennheiser MZW415 Windscreen (Grey)
- Length of 210 mm
- Diameter of 84 mm
- Suitable for the MKH416 microphones.
Usually ships in 4 - 6 weeks
You Pay:
$89.00
Rycote Standard Hole Shotgun Mic Foam (18cm)
- Foam windscreen is designed to avoid high-frequency roll-off
- Up to 20dB of wind noise attenuation
- UV and moisture resistant
- Excellent resistance to moisture and UV light
Usually ships in 8 - 12 Weeks
You Pay:
$40.95
Rycote BBG Windshield (22mm)
- Great windshielding, in a smaller package
- Perfect for hand-held operations and interviews
- Optional Windjammer available for windiest conditions
Usually ships in 8 - 12 Weeks
You Pay:
$219.00
Rode Dead Kitten Windshield for SVM, NT4
Rode Dead Kitten Artificial Fur Wind Shield
Usually ships in 4 - 6 weeks
You Pay:
$45.95
Rode WS8 Deluxe Windshield
- Easy to use
- High-performance windshield
- Reduces wind noise
- Rubber base
- Acoustically transparent artificial fur
Usually ships in 4 - 6 weeks
You Pay:
$43.95
Comica Audio CVM-MF5 Microphone Wind Muff
- For Comica VP2, and VP3.
- Fits Rode Rode NTG1, NTG2, NTG4, and NTG4+.
- Made of High-Quality Artificial Fur.
- Reduces Wind Noise When Recording.
- Protects Mic from Dust, Dirt & Moisture.
Usually Ships in 4 - 6 Weeks
You Pay:
$46.95
BOYA BY-B04 Fur Windscreen for Shotgun Microphones
- Reduces wind noise
- With elastic cord at the opening for easy adjustment
Usually ships in 4 - 6 weeks
You Pay:
$25.95
Rycote Standard Hole Shotgun Mic Foam (12cm)
- Foam windscreen is designed to avoid high-frequency roll-off
- Up to 20dB of wind noise attenuation
- UV and moisture resistant
- Excellent resistance to moisture and UV light
Usually ships in 8 - 12 Weeks
You Pay:
$40.95