The Isolated BNC Cable Jack for Panel Mount, Solder Version from Neutrik is a machined brass connector with a gold plated center contact. The jack provides a rugged, non-abrasive connection that can stand up to long term use.
Key Features
- Gold plated center contact
- True 75-ohm design for serial and digital (HD) signals; meets stringent HD requirements
- Isolated panel mount solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential
- Grounded panel mount possible; simply remove isolation washer
Specifications
Connection Type |
BNC 75 ohm |
Gender |
Female |
Signal Type |
HD, SDI, Video, AES/EBU, composite, YUV, RGB, RGBH, RGBHV |
Contact Resistance |
≤ 3 mΩ (inner) (inner) |
Comment |
≤ 2 |
Dielectric Strength |
1,5 kVdc |
Impedance |
75 ohms |
Insulation Resistance |
> 5 GΩ |
Rated Voltage |
500 V |
VSWR |
≤ 1.03 / > 37 dB up to 1 GHz ≤ 1.05 / > 32 dB up to 2 GHz ≤ 1.08 / > 28 dB u |
Insertion Force |
< 25 N |
Lifetime |
> 1000 mating cycles |
Wiring |
Solder contacts |
Locking Device |
Bayonett |
Mounting Direction |
Front |
Chassis |
12.7 mm |
Contacts |
Brass (CuZn39Pb3), 0.2 µm AuCo (Center contact) |
Insert |
PTFE |
Shell |
Polyacetal (POM) (Insulation Shell) |
Shell Plating |
Optalloy |
Standard Compliance |
IEC 6016908, MIL 348A |
Temperature Range |
86 to 185° F (-30 to 85° C) |