The Isolated BNC Chassis Connector in D-Shape Housing (Nickel) from Neutrik is a feed-through connector which offers a true 75 Ω design for serial and digital (HD) signals. It features a machined brass connector body that provides an extremely rugged and non-abrasive connection over long term use. In addition, it is recessed and therefore well protected in a D-shape housing (audio industry standard).
Key Features
- The BNC Chassis Connector features a gold plated cage type center contact, which provides the best possible shielding and lowest contact resistance.
- It has an extremely robust closed contact design.
- It offers a true 75 Ω design that meets stringent HD requirements.
- The BNC Chassis Connector's isolated panel mount feature solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential.
- Its standard D-shape housing provides flush mounting and protection from damage.
Specifications
| Connection Type |
Female BNC 75 Ω |
| Signal Type |
HD, SDI, Video, AES/EBU, Composite, YUV, RGB, RGBH, RGBHV |
| Contact Resistance |
≤ 3 m Ω (inner) |
| Comment |
≤ 2 |
| Dielectric Strength |
1.5 kV DC |
| Impedance |
75 Ω |
| Insulation Resistance |
> 5 G Ω |
| Rated Voltage |
500 V |
| VSWR |
≤ 1.03 / > 37 dB up to 1 GHz ≤ 1.05 / > 32 dB up to 2 GHz ≤ 1.08 / > 28 dB u |
| Insertion Force |
< 25 N |
| Lifetime |
> 1000 mating cycles |
| Locking Device |
Bayonet |
| Mounting Direction |
Front |
| Chassis |
D-shape |
| Contacts |
Brass, 0.2 µm AuCo (center contact) |
| Insert |
PTFE |
| Shell |
Polyacetal (POM) (insulation shell) |
| Shell Plating |
Optalloy |
| Housing |
D-Shape Housing: Zinc diecast gal nickel plating |
| Standard Compliance |
IEC 6016908, MIL 348A |
| Temperature Range |
-22 to 185°F (-30 to 85°C) |
