The heavy-duty Neutrik NP2X-BAG Professional 1/4" Phone Plug features a thin A-gauge 1/4" plug with unique Neutrik chuck type strain relief. The slimline shell with a width of 0.57” (14.5mm) meets the requirements for high-density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. This plug serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers, and mixing desks.
Key Features
- Extra slim 1/4" plug for high packing density
- Robust diecast shell in stylish design
- Proven chuck type strain relief for reliable cable retention
- Sleek design for handling convenience
- Precision machined one-piece contact avoids hook up of tip contact
Specifications
| Connection Type |
Plug |
| Gender |
Male |
| Contact Resistance |
Depends on mating connector mΩ (inner) |
| Dielectric Strength |
1 kVDC |
| Insulation Resistance |
>2 GΩ (initial) |
| Rated Current Per Contact |
Depends on mating connector A |
| Rated Voltage |
50 V |
| Cable O.D. |
4 to 7 mm |
| Lifetime |
>1000 mating cycles |
| Wire Size |
1 mm², 18 AWG |
| Wiring |
Solder contacts |
| Bushing |
Polyacetal (POM) + PU |
| Contact Plating |
2 µm Ni (Su) |
| Contacts |
Brass (CuZn39Pb3) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell Plating |
Black chromium |
| Strain Relief |
Polyacetal (POM) |
| Standard Compliance |
IEC 60603-11 / EIA RS-453 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature Range |
-4 to 149°F (-20 to 65°C) |
