The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required.
In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver loaded on a 1” rotatable constant directivity 90°x60°CD horn with a 8” high efficiency low-frequency transducer with a 1.5” voice coil.
The cabinet is equipped with 4 x M 8 brass inserts and a steel U-Bracket. The front logo is in aluminium and rotatable.
The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.
P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).
Product Features and Applications:
100 W RMS
Weatherproof cabinet IP 55
Aluminium grill and stainless steel bracket
One 8" high-output LF transducer with 1.5" voice coil
One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
90° x 60° constant directivity horn
2° x 15° enclosure sides for cluster configurations
PTC Driver Protection
LICC (Low Impedance Compensated Crossover) network
2 metres 4 x 1.5 Input cable
- Outdoor Sound Reinforcement in small and medium spaces
- Sound Reinforcement in outdoor and indoor applications
- High-Level AV Playback- AV Playback
- Flown cluster configurations
- Large speech systems
- Music Sound Reinforcement
- Voice and Music reproduction
Technical Specifications:
- Frequency Response -10 dB:80 Hz ÷ 20 kHz
- Max SPL @ 1m:121 dB
- Horizontal coverage angle:90°
- Vertical coverage angle:60°
- Directivity index; Q:11
- System Sensitivity:95 dB
- Nominal Impedance:16 O
- Power Handling:100 W
- Peak Power Handling:400 W
- Recommended Amplifier:200
- Protections:Dynamic protection on Compression Driver
- Crossover frequencies:2200 Hz
- Input connector:4 x 1.5 mm square 2 m Neoprene cable
- Constant voltage transformer:70/100
- Power Selection:70V/30W, 15W - 100V/60W, 30W
- Cabinet Material:8 mm Polyethylene rotomoulded
- Height: 266mm
- Width: 493mm
- Depth: 250mm
- Net Weight: 12.5kg
