StarTech Dual-Slot M.2 to SATA Adapter - RAID
this item may be nonreturnable
Features
- Install two M.2 SSD drives into a single 2.5” drive bay
- Supports 7 mm or larger 2.5" SATA bays
- Supports SATA I, II and III (up to 6Gbps)
- SMART support
- Easy to install with all necessary hardware included
Related Products
Description
Boost your system performance by enhancing the capacity, speed and security of your data storage. This StarTech Dual-Slot M.2 to SATA Adapter - RAID lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5” drive bay, and increase your storage options by configuring a powerful RAID array.
Key Features:
Build a RAID array to enhance system performance
The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independently of one another.
Maximize file transfer speeds
The M.2 SATA SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SATA SSDs in place of a platter drive reduces your data transfer bottlenecks, giving you file transfer speeds of up to 6Gbps.
The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs.
Easy installation
This open-frame adapter is easy to install as it comes with all the necessary installation hardware and doesn’t require any extra software or drivers, to get you up and running quickly.
Specifications
Connector | |
2 - Drive Connectors | M.2 (SATA, B-Key, NGFF) |
1 - Host Connectors | SATA Data & Power Combo (7+15 pin) |
Environmental | |
Operating Temperature | +5°C to +50°C (+41°F to +122°F) |
Storage Temperature | -25°C to +70°C (-13°F to +158°F) |
Humidity | 15% to 90% |
Hardware | |
Interface | SATA |
Number of Drives | 2 |
Compatible Drive Types | M.2 (SATA, B-Key, NGFF) |
Drive Installation | Fixed |
Supported Drive Height(s) | 2230 |
2242 | |
2260 | |
2280 | |
Chipset ID | ASMedia - ASM1092R |
Packaging Information | |
Shipping (Package) Weight | 3.9 oz [110 g] |
Package Length | 5.6 in [14.2 cm] |
Package Width | 6.8 in [17.2 cm] |
Package Height | 1.2 in [30 mm] |
Performance | |
Maximum Data Transfer Rate | 6 Gbps |
TRIM Support | Yes |
S.M.A.R.T. Support | Yes |
Type and Rate | SATA III (6 Gbps) |
Port Multiplier | Yes |
Hardware Raid Supported | Yes |
Supported RAID Modes | RAID 0 (Striped Disks) |
Hot Swap Capability | No |
Supported RAID Modes | RAID 1 (Mirrored Disks) |
JBOD - (Just a Bunch of Disks) | |
BIG (Spanning or Concatenation) | |
General Specifications | Not compatible with M.2 NVMe or AHCI PCI-Express SSDs |
In order to see multiple drives in JBOD mode, your computer’s SATA controller must also support Port Multiplier. |
In The Box
- Dual M.2 to SATA host adapter
- 2 x sets of drive-mounting hardware
- 4 x adapter-mounting screws
- Quick-start guide
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: StarTech Dual-Slot M.2 to SATA Adapter - RAID
- Manufacturer: Startech
- Model: S322M225R
- SKU: S322M225R
- RM Product #: 84230