Add protection and accessories to your Sony FX2 digital cinema camera with this lightweight and modular Tilta Full Camera Cage Pro Kit for Sony FX2 (Titanium Gray). This cage kit includes the FX2 full cage, a NATO top handle, a 15mm LWS baseplate, two 15mm rods, a run/stop power handle, a handle attachment, a USB-C R/S cable, a bottom plate, and HDMI and USB-C/Multi cable clamps.
Tilta Full Camera Cage for Sony FX2 (Titanium Gray)
Add protection and accessories to your Sony FX2 digital cinema camera with this lightweight and modular Full Camera Cage from Tilta. This modular, formfitting full cage features numerous mounting options as well as an integrated side grip and a removable, bidirectional bottom plate that provides horizontal and vertical mounting options. The aluminum cage maintains access to the camera's controls and functions.
Mount a variety of accessories using the integrated NATO rail, shoe mount, and the 3/8"-16 and 1/4"-20 threads with anti-twist locating points. The removable base features an integrated DJI/Arca-standard plate for quick mounting onto tripod heads and DJI-style gimbal mounts. It also includes an HDMI cable clamp and a USB-C/Multi clamp to protect your cables from pulling.
Tilta Xeno Top Handle with NATO Clamp (Titanium Gray)
Integrate this Tilta Xeno Top Handle into your camera cage configuration for improved low-angle shooting. The top handle secures to your cage via a NATO clamp. Multiple 1/4"-20 and 3/8"-16 threads throughout the handle allow you to attach articulating arms, cable clamps, or other accessories. A single cold shoe slot accommodates a shotgun microphone or wireless transmitter. The handle's silicone grip makes for an ergonomic and anti-slip handgrip.
Tilta Height-Adjustable Arca-Type 15mm LWS Baseplate (Titanium Gray)
This Height-Adjustable Arca-Type 15mm LWS Baseplate from Tilta features a 15mm LWS rod clamp baseplate to accommodate standard 15mm rods, and a quick release top plate is included for integration with Arca-type tripod systems. The system is height adjustable within a 0.78" range to accommodate a follow focus system or matte box, and it features a range of 0.71 to 1.5" from the rod center to the Arca receiver.
A dovetail clamp on the base is compatible with Tilta dovetail plates, and there are also 1/4"-20 threads on the bottom for mounting onto a tripod, plate, or rig. The Arca-type quick release plate features a 1/4"-20 screw to secure your camera. The baseplate can support a camera rig load weighing up to 10 lb.
Tilta Tiltaing Advanced Left-Side Handle Adapter Type VI (Titanium Gray)
The Advanced Left-Side Handle Adapter Type VI from Tilta enables you to mount a Tiltaing Left-Side Wooden Handle to the NATO rail mount on select Tilting camera cages. This Type VI adapter is constructed of aluminum and stainless steel and comes with an Allen key.
Tilta Left-Side Advanced Power Handle with Run/Stop for F570 Battery (Type VI)
Add stability, accessory powering options, and the ability to start/stop your camera with this Type VI Tiltaing Left-Side Advanced Power Handle with Run/Stop for F570 Battery from Tilta. Designed with a finish for Tiltaing camera cages, it features a button for triggering recording on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available to suit your camera.
The handle attaches to the side of your Tiltaing cage using the included mounting arm, which features a NATO rail clamp. The handle accepts a Sony F570 battery, sold separately. There are two connections on the handle for powering accessories: an 8V regulated USB-C output and a 12 VDC output.
Tilta Threaded 15mm Rod (8", Single)
Tilta's 8" Threaded 15mm Rod is an 8" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join. The rod is made from machined aluminum for a balance between weight and strength, and then anodized for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.
Lightweight anodized aluminum construction
The chamfered end eases mounting of rod-based accessories.Both ends are threaded for extending the length of the rod
