Transcend 64GB MTS800 SATA III M.2 Internal SSD
Features
- 64GB Drive Capacity
- M.2 2280 Form Factor
- SATA III 6 Gb/s Interface
- Up to 460 MB/s Sequential Write Speed
- Up to 560 MB/s Sequential Read Speed
Description
Increase your Windows or Linux system's performance by installing the Transcend 64GB MTS800 SATA III M.2 Internal SSD which delivers read speeds of 560 MB/s and write speeds of 460 MB/s. This SSD utilises an SATA III interface that provides 6 Gb/s transfers speeds and supports random 4K reads of 75,000 IOPS and 4K writes of 75,000 IOPS. Its form factor is type 2280 and is installed in a computer with an available M.2 slot that is 80mm long. When using this SDD with a hard drive, you can use Intel's Smart Response Technology to constantly monitor or move your most accessed programmes to the SSD, and stores all other programmes and files to the hard drive. It also offers TRIM support, which helps reduce write times to the drive allowing you to save information faster and prolongs the life the drive.
Features
- M.2 Type 2280 form factor (80mm) for mobile computing devices
- Supports Wear Levelling and Intelligent Block Management
- DDR3 DRAM cache
- Supports DevSleep mode, which allows devices to completely shut down the SATA interface and conserve battery life, unlike existing partial/slumber states
- Supports Power Shield, S.M.A.R.T., TRIM, and NCQ commands
- RoHS compliant
Intel Smart Response Technology
Transcend's SATA III 6 Gb/s MTS800 M.2 SSD supports Intel Smart Response Technology (ISRT), which allows you to configure your computer system with an SSD used as cache memory between the hard disk drive and system memory. This provides the advantage of having a hard disk drive for ample storage capacity while delivering an SSD-like overall system performance experience. ISRT works by monitoring which programmes and files you access most frequently and stores them on the SSD. As a result, application launch speed and overall system responsiveness are improved, while the large capacity of the hard drive is free to store all your other programmes and files. In this configuration, only one drive letter is displayed; no additional drive letter is required for the SSD used as cache.
Specifications
Storage | |
Drive Capacity | 64.00 GB |
Performance | |
Interface | SATA III (6 Gb/s) |
Random Read Speed | 75,000 IOPS (4 KB Files) |
Random Write Speed | 75,000 IOPS (4 KB Files) |
Sequential Read Speed | 570 MB/s |
Sequential Write Speed | 450 MB/s |
Physical | |
Drive Type | SSD |
Form Factor | M.2 2280 |
SSD Specs | |
Flash Memory Type | Multi-Level Cell (MLC) |
Electrical | |
Power Draw | 3.67 W (Active) 0.55 W (Standby) |
Supported Voltage | 3.3 VDC |
Environmental | |
Operating Shock | 1500 G / 0.5 ms |
Operating Vibration | 3 G / 5 to 800 Hz |
Storage Vibration | 5 G / 5 to 800 Hz |
Operating Temperature | 0 to 70°C |
Storage Temperature | -40 to 85°C |
Operating Humidity | 0 to 95% |
General | |
Certifications | BSMI, COE, FCC, RoHS, as per Manufacturer |
Dimensions (W x H x D) | 80.0 x 22.0 x 3.5 mm |
Weight | 9.0 g |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Transcend 64GB MTS800 SATA III M.2 Internal SSD
- Manufacturer: Transcend
- Model: MTS800
- SKU: TS64GMTS800
- RM Product #: 26076
- Capacity: 64 GB