Wooden Camera: Camera Rigs & Support

• For 3/8"-16 Anti-Twist Threads
• Secure Mounting with Locating Pins
• 19mm Rod Diameter, 5" Length
• For Mounting Lens Motors, Handles & More
• Matte Black Finish

• Rod Mounts on Face or Side of Rig
• Two 3/8"-16 Anti-Twist Bolts
• Secure Mounting with Locating Pins
• 15mm Rod Diameter, 1.5" Length
• For Mounting Lens Motors, Handles & More
• Matte Black Finish

• Rod Mounts on Face or Side of Rig
• Two 3/8"-16 Anti-Twist Bolts
• Secure Mounting with Locating Pins
• 15mm Rod Diameter, 3" Length
• For Mounting Lens Motors, Handles & More
• Matte Black Finish

• 1.5, 3 & 5" Bolt-On 15mm Rods
• For 3/8"-16 Anti-Twist Threads
• Secure Mounting with Locating Pins
• 15mm Rod Diameter, Matte Black Finish
• For Mounting Lens Motors, Handles & More

• For Modern WC Cages/Components Only
• Secure Mounting with Locating Pins
• 1/4"-20 Stud with SmallHD Pin Spacing
• 15mm Rod Diameter, Matte Black Finish

• For Modern WC Cages/Components Only
• Secure Mounting with Locating Pins
• 1/4"-20 Stud with SmallHD Pin Spacing
• 15mm Rod Diameter, Matte Black Finish

• For Modern WC Cages/Components Only
• 1.5, 3 & 5" 15mm Bolt-On Rods
• 1/4"-20 Studs with SmallHD Pin Spacing
• Secure Mounting with Locating Pins
• 15mm Rod Diameter, Matte Black Finish

• Secures to Wooden Camera C70 Accessories
• Canon Accessory Mount Ridges
• 1/4"-20 Threads
• 3/8"-16 ARRI Accessory Mounts

• 4 Points of Articulation
• Interchangeable Mounting Knobs
• Removable Anti-Twist Pins
• 1/4"-20 and 3/8"-16 Centre Threads
• Compatible 25mm Ball System

• 4 Points of Articulation
• Interchangeable Mounting Knobs
• Removable Anti-Twist Pins
• 1/4"-20 and 3/8"-16 Centre Threads
• Compatible 25mm Ball System

• V-Lock Mounting Kit
• 1/4"-20, 3/8"-16, and M3 mounting points
• Removable screw-in set pins
• one 3/8"-16 and two 1/4"-20 mounting points

Pass-through 1/4"-20 hole One 1/4"-20 screw- six different positions One 3/8"-16 and one 1/4"-20 mounting point

• Offset an Accessory from Your Rig
• 3/8"-16 Male Screw with Locating Pins
• 3/8"-16 Female Thread & Locating Divots
• Bracket Measures 2 x 1", Offsets 1.1"
• Durable Aluminium Construction

• 15mm Dual Rod Clamp for Accessory Plate
• 15mm LWS Spacing
• 3/8"-16 Anti-Twist Threads
• Works with Bolt-On Accessory Rail Clamp
• Works with Universal Accessory Clamp
• Durable Aluminium Construction

• Add Rosette Handgrip to Rig
• ARRI-Standard Rosette with M6 Thread
• Anti-Twist 1/4"-20 Screw Mount
• Anti-Twist Locking Pins

• 7" Total Length
• Universal Front Connector
• 5" Extension, 1" Extension
• Allen Key

• Modular 8" Top Handle for Camera Rig
• Front and Rear Connectors
• 5" Extension and 1" Extension
• Allen Wrench

• 5" Total Length
• Universal Front Connector
• 3" Extension, 1" Extension
• Allen Key

• Mount Accessories onto your BURANO Rig
• Cheese-Style Mounting Plate
• Flat Plate Measures 3.5 x 2"
• Multiple 1/4"-20 and 3/8"-16 Threads
• Anti-Twist Divots around Each Thread
• Durable Aluminium Construction

• Accessory Plate for Sony BURANO
• Mounts on Left Side of Camera
• 1/4"-20 & 3/8"-16 Anti-Twist Threads
• Sensor Plane Markings
• Mounts onto Top Plate/Baseplate Options
• Lightweight Aluminium Construction

• For Blackmagic URSA Mini
• Tape hook for accurate focus measuring
• Attaches by (4) 1/4-20 screws
• ARRI accessory mounts

• Ergonomic wooden handgrip
• Right hand version
• Attaches by ARRI standard rosette

• Use with Original FS5 Handle
• 1/4"-20 & 3/8"-16 Threaded Holes
• ARRI-Standard Accessory Mounts
• Includes Tape Hook
• Great for Magic Arms, Hot Shoes, & More

• 1/4"-20 and 3/8"-16 Tapped Holes
• Versatile 2-Piece Design
• Can Fit Around or Replace Top Handle
• Measuring Hook

• Three Points of Adjustment
• 5" of Travel with Safety Catch
• Spring-Loaded Locking Lever
• Attaches to top handle of Sony FS7

• For Safety NATO Rails
• Attach accessories to your existing rig
• Attaches Monitors, Handles, and More

• Single, 15mm Rod, 7.5 cm Length
• Chamfered Ends
• Hollow interior
• Provides maximum strength
• Aluminium construction

• Single, 15mm Rod, (15 cm) Length
• Chamfered Ends
• Aluminium construction

• Single, 19mm Rod, (23 cm) Length
• Chamfered Ends
• Hollow interior
• Provides maximum strength
• Aluminium construction

• Single, 19mm Rod, (30.5 cm) Length
• Chamfered Ends
• Hollow interior
• Aluminium construction
• Provides maximum strength

• Single, 19mm Rod, (46 cm) Length
• Chamfered Ends
• Aluminium construction
• Mount accessories

• ARRI Standard Mounting Plate
• Safety Catches on Each End
• Fits OConnor 2060, 2575, 120EX
• Fits Sachtler Cine 30
• Attaches to Most Tripods Head via Screws

• Bolts onto 1/4-20 Mounting Point
• Mounts 15mm Accessories to Cheeseplates

• Stainless Steel Construction
• M6 Internal Threads
• Securely mount a rosette
• Attach to any rig with 2+ female sockets

• Single, 15mm Rod, (30.5 cm) Length
• Chamfered Ends
• Maximum strength

• Single, 15mm Rod, (38 cm) Length
• Chamfered Ends
• For mounting accessories
• Provide maximum strength

• Single, 15mm Rod
• 46cm Length
• Chamfered Ends
• Aluminium construction
• Hollow interior

• Single, 15mm Rod
• 61 cm Length
• Chamfered Ends
• Mount accessories
• Aluminium construction

• Attaches Battery Plates to Camera
• Compatible with +1 Module & A-Lock
• Attach V-mount and Gold-mount battery plates
• Attaches to back of RED module

• Adjustable Mounting System
• For V-Mount & Gold Mount Battery Plate
• For QRC Gold Mount & RED/BLUESHAPE Plate
• Adjusts Counterbalance
• Studio to Handheld Mode Transition

• Mounts & Adjusts Viewfinder On Rig
• Viewfinder Mounting Bracket Included
• Adapter for Alphatron & SmallHD Included
• 4" NATO Rail w/ Standard-Size Dimensions
• Safety Pin Prevents Accidental Removal

• Provides 1/4" & 3/8" Accessory Threads
• For C100, C300, C500
• For EVF mounts and other accessories

• For use with UVF Mount and v2
• Slotted screw pattern
• Holes spaced 25 to 36 mm apart

• Rod clamp for attaching to 15mm studio rods
• 15mm rod posts for attaching LW 15mm accessories
• Height adjustment
• Threaded holes for attaching 15mm extensions

• Threaded 1/4-20 & 3/8-16 Holes
• Safety Catch Prevents Camera Detachment

• For 0.59" (15mm)Studio Rods
• Provides 1/4-20 & 3/8-16 Mounting Points
• Compact and Lightweight Design

• For 19mm Studio Rods
• Provides 1/4-20 & 3/8-16 Mounting Points
• Compact and Lightweight Design

• ARRI -Type Rosette
• Contoured Brown Leather Grip
• M6-threaded locking lever

• Supports Power Plate & On Board Recorder
• Multiple Hole Patterns
• Includes L-Bracket
• Dual Rosette Mounts

• Single ARRI Standard Rosette
• NATO Compatible Rail Clamp
• 3/8"-16 and 1/4"-20 Accessory Threads