Audac AMP20MK2 Mini Stereo Low Impedance Amplifier
Related Products
Features
- Compact size
- 2 x 15 Watts output (4 ohm stereo)
- Two gain potentiometers
- Perfectly suited to be hidden in a closet
Description
The Audac AMP20MK2 Mini Stereo Low Impedance Amplifier is a mini stereo power amplifier with a power rating of 2 x 15 Watt that lends itself perfectly to small speaker systems requiring compact and economical audio solutions.
It offers the ideal solution for applications such as class rooms, offices and meeting rooms where only a small amount of speakers are required. The compact size and very high efficiency makes it perfectly suited to be hidden in a closet, on a false ceiling or mounted under a desk or table.
The combination of the stereo balanced line, with microphone input, makes it perfectly suited for applications where it should be used in combination with projection screens and video sources while a microphone is connected.
Two gain potentiometers make it possible to control the sensitivity and balance between music and speech, while a switch allows bridging of the output channels to obtain one channel with merged output power. A remote wall mixer can be connected for applications where local mixing for the inputs is desirable, while large distances can be covered between the source and amplifier using simple CAT5 twisted pair cabling.
The volume controller input allows connection of an additional wall controller for overall volume control. The Class-D amplifier technology, standby mode and included switching power supply makes this device compliant to the highest energy efficiency and environmental requirements.
A variety of optionally available mounting brackets for the AUDAC S-Box product range are allowing desk, closet or 19” equipment rack installation.
Specifications
SYSTEM SPECIFICATIONS | |
RMS Power @ 4 Ohm: | Stereo 2 x 15 Watt |
RMS Power @ 8 Ohm: | Stereo 2 x 7.5 Watt |
RMS Power @ 8 Ohm: | Bridge 30 Watt |
Inputs: | 1 x Stereo Balanced Line (3-pin Euro Terminal Block - 3 81 mm) |
1 x Balanced Microphone (2 x 3-pin Euro Terminal Block - 3.81 mm) | |
1 x Remote Wall Mixer (RJ45) | |
1 x Remote Volume controller (RJ45) | |
Outputs: | 1 x Stereo Loudspeaker (4-pin Euro Terminal Block - 5 08 mm) |
Line input Impedance: | 20 k Ohm |
Line inputSensitivity: | - 12 dBV ~ +12 dBV |
Microphone input Impedance: | 47 k Ohm |
Microphone input Sensitivity: | - 50 dBV ~ -18 dBV |
THD+N at 1 kHz < 0.1 % | |
Crosstalk: | < -75 dB |
Signal / Noise ratio: | > 95 dB |
Standby power consumption: | 0.8 Watt (PSD241 included) |
Efficiency: | 87% |
Cooling: | Passive |
Protection: | Over-Heat / Over-Load / Short circuit / Limiter |
Energy certification: | Energy Star 3.0 |
PRODUCT FEATURES | |
Dimensions (Width x Height x Depth): | 108 x 44 x 164 mm |
Weight: | net 0.80 Kg |
Power supply: | 24V DC (PSD242 switching power supply included 100 ~ 240V AC / 47 ~ 63 Hz) |
SHIPPING & ORDERING | |
Shipping weight & volume: | 1.12 Kg - 0.0078 Cbm |
Accessories included: | PSD241 - Power supply 24V / 1.67 A (Efficiency Level V) |
In The Box
- Audac AMP20MK2 Mini Stereo Low Impedance Amplifier
- Power supply 24V / 1.67 A (Efficiency Level V)
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Audac AMP20MK2 Mini Stereo Low Impedance Amplifier
- Manufacturer: Audac
- Model: AMP20MK2
- SKU: AMP20MK2
- RM Product #: 76132