Audio Technica AT8010 Microphone
Product #2611 | SKU AT8010
Available from supplier Usually ships in 2 - 3 working days
0.0 (no ratings yet) Thanks for your rating!

Audio Technica AT8010 Microphone

Product #2611 | SKU AT8010
Available from supplier Usually ships in 2 - 3 working days

OmniDirectional Instrument Condenser Microphone
Customer Reviews
0.0 (no ratings yet) Thanks for your rating!
Email me when stock arrives
Product Details
  • Product: #2611
  • SKU: AT8010
Our Price $259.00

Delivery - $7.90*
2 - 3 working days
2 - 3 working days
2 - 3 working days
*estimated shipping to Auckland

Read More: Description More Info


The AT8010 requires 11V to 52V DC phantom power or a 1.5V AA battery for operation. A battery need not be in place for phantom power operation.

Output from the microphone’s XLRM-type connector is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” – positive acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be wired consistently: Pin 1-to-Pin 1, etc.
An integral 80 Hz high-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.

The high sensitivity of the AT8010 assures useful output and an excellent match to most input sources. In some cases, however, an attenuator such as the Audio-Technica AT8202 may be required between the microphone and preamplifier to avoid overloading sensitive input stages.
The microphone is RoHS compliant–free from all substances specified in the EU directive on hazardous substances.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided.


  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
  • Open Circuit Sensitivity: –44 dB (6.3 mV) / –45 dB (5.6 mV) re 1V at 1 Pa*

(Phantom / Battery)

  • Impedance: 250 ohms / 300 ohms

(Phantom / Battery)

  • Maximum Input Sound Level: 137 dB / 123 dB SPL, 1 kHz at 1% T.H.D.

(Phantom / Battery)

  • DynamicRange (typical): 113 dB / 99 dB, 1 kHz at Max SPL

(Phantom / Battery)

  • Signal-To-Noise Ratio: 70 dB, 1 kHz at 1 Pa* 11-52V DC, 2 mA typical
  • Phantom Power Requirements: 1.5V AA/UM3
  • Battery Type: 0.4 mA / 1200 hours typical (alkaline)
  • Battery Current / Life: Flat, roll-off
  • Switch: 165 g (5.8 oz)
  • Weight (less accessories):
  • Dimensions: 178.0 mm (7.01") long, 26.0 mm (1.02") head diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; battery; soft protective pouch


0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review
  • Product: Audio Technica AT8010 Microphone
  • Manufacturer: Audio Technica
  • Model: AT8010
  • SKU: AT8010
  • RM Product #: 2611
  • Warranty: 1 year manufacturer warranty on all Audio Technica products. 5 year limited warranty on all Audio Technica Wired Microphones.

Recently Viewed

View All