SHOP MARCH BRAND BLITZ! Up to 35% OFF!

Beholder EC1 3-Axis Handheld Gimbal Stabilizer

Product #37151 | SKU EC1 | Beholder
This product is no longer available what does this mean?
Not currently for sale
Contact us for more information
This product is no longer available what does this mean?

Features

  • 360° Rotation Along All 3 Axes
  • 32-Bit Controller & 12-Bit Encoder
  • Adaptive PID Algorithm
  • Supports Cameras between 0.9 - 2 kg
  • Three Follow Modes Plus Auto-Inversion

Description

The EC1 Beholder is a 3-axis handheld gimbal stabiliser for DSLR and mirrorless cameras weighing between 0.9 - 2 kg. The EC1 offers unlimited 360° rotation along the yaw, pitch, and roll axes, and features an advanced 32-bit controller and 12-bit encoder system. The gimbal employs an adaptive PID algorithm to deliver stable rotation.

The EC1 offers three follow modes plus an auto-inversion mode that allows for upside down operation. Auto-inversion lets you use the gimbal with dual handle support systems. The EC1 also features a lock mode that sets the camera in a fixed position and a point-and-lock mode that locks the position you hold the camera in for a few seconds. The EC1 also has an OLED display on the rear that confirms the selected mode of operation and provides battery life info.

The EC1 is designed with a quick-release baseplate that allows for convenient camera attachment and tool-less balancing. It also has a 1/4"-20 threaded mounting hole on the handle for attaching accessories for advanced setups, and a 3/8"-16 threaded mounting hole on the bottom for mounting onto a tripod, monopod, and other support gear.

The EC1 is supplied with three 18650 batteries that provide up to 3 hours of operating life. These batteries are rechargeable from within the EC1 via an included micro USB adapter.

Features

Unlimited 360° Rotation
The EC1 Beholder features three 360° rotating brushless motors that give you a limitless range of motion along all three axes: yaw, roll, and pitch.

Advanced Stabilisation
Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabiliser.

Lock Mode
In Lock Mode, the Yaw, Pitch, and Roll axes work together to keep the camera fixed and pointed in one direction. The camera's position will stay the same no matter how you move the handle.

Point & Lock
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.

Multiple Follow Modes
The EC1 features 3 different follow modes. In yaw-axis follow mode, the EC1 will only follow your pan movements. In pitch and yaw-axis follow mode, the EC1 will follow your pan and tilt movements. The 3-axis follow mode gives you full control, allowing you to pan, tilt, and roll.

Auto Inversion
Switch to inverted mode at any time by simply flipping the handle over the camera. Inverted mode can be operated in conjunction with any of the lock and follow modes.

OLED Status Display
A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.

Quick-Release Baseplate
Featuring a newly-designed quick-release baseplate system, the EC1 is easy to balance without any tools.

Multiple Mounting Points
The EC1 handle a 1/4"-20 threaded mounting hole for attaching accessories such as a light, microphone, or monitor for advanced setups; and a 3/8"-16 threaded mounting hole on the bottom of the handle for to mount the EC1 on a tripod, jib, or dual handle support system.

Specifications

Load Capacity 0.9 - 2 kg
Rotation Range Yaw: 360°
Roll: 360°
Pitch: 360°
Tripod Mount Thread 1 x 3/8"-16
Accessory Mount Thread 1 x 1/4"-20
Battery 3 x 18650 model Li-ion batteries included (3.7 V)
Approx. 2-3 hours operating time
Approx. 3-4 hours charging time
Operating Temperature -10 to 70°C
Dimensions 36.0 x 18.4 x 7.9 cm
Weight 1.2 kg

In The Box

  • Beholder EC1 3-Axis Handheld Gimbal Stabilizer
  • Battery Cap with 3/8"-16 Mount
  • Battery Holder
  • Micro USB AC Adapter
  • Quick Release Plate
  • Travel Case
  • Travel Case Shoulder Strap
  • 3 x 18650 Battery

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: Beholder EC1 3-Axis Handheld Gimbal Stabilizer
  • Manufacturer: Beholder
  • Model: EC1
  • SKU: EC1
  • RM Product #: 37151
  • Battery: Lithium-Ion
  • Load Capacity: 1.0 kg
  • Warranty: 1 year manufacturer warranty

Recently Viewed

View All