Miller
Miller Air Carbon Fiber Tripod System
- Lightweight Video/Photo Tripod System
- Carbon Fibre Tripod Legs with 75mm Bowl
- Pan & Tilt Fluid Head with Camera Plate
- Pan Handle, Carry Strap, Carry Case
- 2kg - 5kg Payload
Usually Ships in 2 - 3 Weeks
You Pay:
$1,879.00
Miller Air Alloy Tripod System
- Lightweight Video/Photo Tripod System
- Aluminium Tripod Legs with 75mm Bowl
- Pan & Tilt Fluid Head
- Camera Plate, Pan Handle, Carry Case
- 2kg - 11 lb Payload
Usually Ships in 2 - 3 Weeks
You Pay:
$1,499.00
Miller Sprinter II 2-Stage Carbon Fiber Tripod (Mid-Level Spreader Ready)
- For Heads with 100mm Bowl
- Two-Stage, Three-Section Legs
- Supports up to 100 Pounds
- 17.3 to 60.4" Height Range
- Carbon Fibre Construction
Usually Ships in 2 - 3 Weeks
You Pay:
$2,599.00
Miller 255 Hi-Hat with 150mm Bowl
- Mount video fluid head
- Less shakes at an extremely low camera angle
- Available in a variety of different sizes
Usually ships in 21 - 22 working days
You Pay:
$995.00
Miller Solo DV Aluminum Tripod with 75mm bowl- Supports up to 44 lb (20 kg)
- Ultra rigid aluminium alloy and magnesium design
- 3-position Leg Angle locking - no spreader
- Spike or wind-down rubber feet
Usually Ships in 2 - 3 Weeks
You Pay:
$749.00
Miller 465 Hi Hat with 75mm Bowl- Supports up to 33 lb (15 kg)
- Bolts to any flat surface
- Can be permanently mounted
- Accommodates 75mm ball levelling heads
Usually Ships in 2 - 3 Weeks
You Pay:
$679.00
Miller 1206X Sliding Plate Assembly Mini
- For 1208 camera plate (Mini Euro).
- Can be used with CX and Compass heads.
- 60mm of travel.
Usually Ships in 2 - 3 Weeks
You Pay:
$349.00
Miller Solo 75 2-Stage Bag (Black)
- For 75mm Solo Tripod Systems
- Use with 2 & 3 Stage Systems
- Tapered Triangular Shape for Secure Fit
- Extra Wide Opening for Easy Access
- D-Links for Optional Shoulder Strap
Usually Ships in 2 - 3 Weeks
You Pay:
$149.00
Miller Standard Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (6cm)
- For AIR, DS10, DS20, Compass, CompassX
- Standard Plate Size
- 2.4" of Travel
- 1/4"-20 and 3/8"-16 Camera Screws
- Sliding Quick Release Design
Usually Ships in 2 - 3 Weeks
You Pay:
$109.00
Miller Camera Plate Mini EURO (Quick Release)
- Mini Euro style quick release sliding camera platform with 60mm travel
- Suits Compass20 fluid head
- Includes 1/4" & pin, and 1/4" & 3/8" screws for attachment
- To suit 1206X
Usually Ships in 2 - 3 Weeks
You Pay:
$109.00
Miller 3/8" Camera Screw
- Used on Miller Euro (860) camera plate.
- Used on Mini Euro (1208) camera plate.
- Used on Large Euro (1060) camera plate.
- Used on ARRI (1065) camera plate.
- Used on Sliding (1204) camera plate.
Usually Ships in 2 - 3 Weeks
You Pay:
$23.95
Miller 75 Sprinter II 2-Stage Carbon Fibre Tripod (Mid-Level Spreader Ready)
- For Heads with 75mm Ball
- Two-Stage, Three-Section Legs
- Supports up to 30 kg
- 44 - 153 cm Height Range
- Carbon Fibre Construction
Usually Ships in 2 - 3 Weeks
You Pay:
$1,449.00
Miller HDC MB Mitchell Base 1-Stage Aluminium Tripod
- Mitchell Base, 90+ kg Payload
- Heavy-Duty 24mm Alloy Tubing
- Quick-Action Rotary Leg Locks
- Optimised for Miller 993 Mid-Spreader
Usually Ships in 2 - 3 Weeks
You Pay:
$2,499.00
Miller 681 Pan Bar Handle for Select Video Heads
- For DS5, DS10, DS20, Compass 23 Heads
- 15.4" Length
- Aluminium-Alloy Pan Bar
- Rubberised Handle
- Right or Left-Handed Use
Usually Ships in 2 - 3 Weeks
You Pay:
$209.00
Miller 1/4" Camera Screw Short
- Captive design.
- Used on Miller Euro (860) camera plate.
- Used on Mini Euro (1208) camera plate.
- Used on Sliding (1204) camera plate.
Usually Ships in 2 - 3 Weeks
You Pay:
$23.95
Miller 1643 Miller Solo DV Alloy Tripod with DS-20 Fluid Head, Camera Plate, Pan Arm, and Soft Case
- Positive-lock calliper braking system
- Wide 12-63" height range
- Three position fixed leg stops
- Solid sleeve-style rotary leg locks
- Retractable rubber feet and spikes
Usually Ships in 2 - 3 Weeks
You Pay:
$2,299.00
Miller 489 Camera Mounting Plate
- Comes with 1/4"-20 and 3/8"-16 threaded screws.
- Replacement for DS-20 fluid heads
Usually ships in 4 - 6 Weeks
You Pay:
$289.00
Miller 550 Rubber Feet Pads for Select Tripods (Set of 3)
- Compatible with Miller Tripods Featuring 835 & 508 Above Ground Spreaders
Usually Ships in 2 - 3 Weeks
You Pay:
$139.00
Miller 858 Offset Camera Plate
- Additional 60mm Sliding Range
- Works with Red One Camera
Usually Ships in 2 - 3 Weeks
You Pay:
$229.00
Miller 483 Studio Dolly with Cable Guards and Tracking Locks - for Sprinter and HD Tripods
- Independant Track locking
- Height Adjustable Cable Guards
- Reinforced centre hub
- Collapsible arm design
- Sturdy Tente roller castors
Usually Ships in 2 - 3 Weeks
You Pay:
$3,149.00
Miller 311 Solo Carbon Fiber Monopod
- Carbon fibre composite leg tubes
- Removable non-skid rubber foot
- Temperature-independent axial sleeve locks
Usually Ships in 2 - 3 Weeks
You Pay:
$379.00
Miller Baby Aluminum 2-Stage Tripod Legs (100mm Bowl) with On-Ground Spreader and Carry Case
- Aluminium alloy construction
- 100mm / 4" bowl base
- Single extension design
- Toggle clamping system
- Maximum height of 20.0-inch
Usually Ships in 2 - 3 Weeks
You Pay:
$1,679.00
Miller 480 Studio Dolly - for Sprinter and HD Tripods
- Reinforced centre hub
- Collapsible arm design
- Sturdy Tente roller castors
- Individual wheel brakes
- Integrated carry handle
Usually Ships in 2 - 3 Weeks
You Pay:
$1,799.00
Miller HDC 150 1-Stage Short Metal Alloy Tripod (Ground Spreader-Ready)
- For Heads with 150mm Bowl
- One-Stage, Two-Section Legs
- Supports up to 210 lb
- 16 to 35" Height Range
- Outfitted for Ground Spreader
Usually Ships in 2 - 3 Weeks
You Pay:
$1,869.00
Miller 481 Studio Dolly with Cable Guards for Sprinter and HD Tripods
- Height Adjustable Cable Guards
- Reinforced centre hub
- Collapsible arm design
- Sturdy Tente roller castors
Usually Ships in 2 - 3 Weeks
You Pay:
$2,299.00
Miller DS20 SOLO-Q 75 2-Stage Tripod (Carbon Fiber)
- DS-20 Fluid Head, 22 lb Payload
- SOLO DV 2-Stage Tripod, 69.5" Max Height
- 75mm Half Ball Levelling Base
- Variable Pan and Tilt Fluid Drag
- Independent Pan and Tilt Locks
Usually Ships in 2 - 3 Weeks
You Pay:
$2,699.00
Miller 3602 Resin Transit Case for CiNX Fluid Head & Accessories
- Fits CiNX 3, 5, or 7 & Accessories
- Waterproof and Impact-Resistant
- Air-Pressure Release Valve
- Double-Hinged Latches; TSA Lock Support
Usually Ships in 2 - 3 Weeks
You Pay:
$1,429.00
Miller DS-10 Fluid Head (75mm Ball Base)
- Supports 11 lbs
- Selectable Counterbalance
- Fluid Drag System with Friction Boost
Usually Ships in 2 - 3 Weeks
You Pay:
$1,169.00
Miller Sprinter II 2-Stage Carbon Fiber Tripod (Ground Spreader Ready)
- For Heads with 100mm Bowl
- Two-Stage, Three-Section Legs
- Supports up to 100 Pounds
- 17.3 to 60.4" Height Range
- Carbon Fibre Construction
Usually Ships in 2 - 3 Weeks
You Pay:
$2,599.00
Miller DS-10 Aluminum Tripod System DS-10 Fluid Head, 1-Stage Tripod, Mid-Level Spreader, Softcase
- Built-in bubble for horizontal levelling
- Aluminium alloy construction
- 75mm / 3" bowl base
- Single extension design
- Maximum height 52.0-inch (not including head)
Usually Ships in 2 - 3 Weeks
You Pay:
$2,749.00
Miller 3035 ArrowX 3 Sprinter II Single-Stage Aluminum Alloy Tripod System
Includes the ArrowX 3 Fluid Head, 1589 Sprinter II Aluminum Tripod, 475 Tripod Feet, 993 Mid-Level Spreader, 696 Telescopic Pan Handle with Carrier,
Usually Ships in 2 - 3 Weeks
You Pay:
$8,699.00
Miller Softcase for 2-Stage Toggle 2 Tripod Systems (Black)
- For 2-Stage Toggle 2 Tripod Systems
- Use with Light Weight Two Stage Systems
- Triangular Shape for Secure Fit
- Extra Wide Opening for Easy Access
- Double Zipper Closure and Dual Handles
Usually Ships in 2 - 3 Weeks
You Pay:
$229.00
Miller D150 Claw Ball Level Adapter for ArrowFX Fluid Head and 150mm Bowl
- For ArrowFX Fluid Heads
- Mount Flat Base Head on 150mm Bowl
- Removable Long Screw
- 3 x M5 Threads and 4 x 3/8" Holes
- Metal Alloy Construction
Usually Ships in 2 - 3 Weeks
You Pay:
$659.00
Miller HDC MB 1-Stage Short Metal Alloy Tripod (Mid-Level Spreader Ready)
- Flat Mitchell Base
- One-Stage, Two-Section Legs
- Supports up to 210 lb
- 14.4 to 35.4" Height Range
- Outfitted for Mid-Level Spreader
Usually Ships in 2 - 3 Weeks
You Pay:
$2,449.00
Miller CX8 Fluid Head
- Supports 0 to 26.4 lb
- 75mm Ball Base
- 16-Step Counterbalance (15+0)
- 5-Step Pan/Tilt Drag + Zero
- Sliding Sideload Plate
Usually Ships in 2 - 3 Weeks
You Pay:
$2,999.00
Miller Sliding Plate Assembly for 860 Camera Plate Euro & CX/Compass Fluid Heads
- For 860 camera plate (Euro).
- Can be used with Compass heads.
- 70mm of travel.
Usually Ships in 2 - 3 Weeks
You Pay:
$379.00
Miller 945 HD-MINI Aluminum Heavy-Duty Tripod Legs (150mm Bowl)
- Heavy-Duty aluminium alloy construction
- 150mm / 6" bowl base
- Toggle clamping system
Usually Ships in 2 - 3 Weeks
You Pay:
$2,249.00
Miller Toggle 75 2-Stage Alloy Tripod (Mid-Level Spreader Ready)
- For Heads with 75mm Bowl
- Two-Stage, Three-Section Legs
- Supports up to 55 Pounds
- 15.4 to 61.4" Height Range
- Alloy Construction
Usually Ships in 2 - 3 Weeks
You Pay:
$959.00
Miller HDC 100 1-Stage Tall Metal Alloy Tripod (Mid-Level Spreader Ready)
- For Heads with 100mm Bowl
- One-Stage, Two-Section Legs
- Supports up to 210 lb
- 35 to 69.1" Height Range
- Outfitted for Mid-Level Spreader
Usually Ships in 2 - 3 Weeks
You Pay:
$1,599.00
Miller CX2 2500 SOLO Q 75 2-Stage Carbon Fiber Tripod System
- Compact, light and versatile.
- 75mm ball levelling.
- Perfect for payloads to 0-8kg (17.6lbs).
- 15+0 CB Plus selectable counterbalance positions.
- Ergonomically located CB Plus switch.
Usually Ships in 2 - 3 Weeks
You Pay:
$3,299.00
Miller Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)
- For Heads with 100mm Bowl
- Two-Stage, Three-Section Legs
- Supports up to 100 Pounds
- 17.3 to 60.4" Height Range
- Alloy Construction
Usually Ships in 2 - 3 Weeks
You Pay:
$1,949.00
Miller HDR MB 1-Stage Alloy Tripod (Ground-Level Spreader Ready)
- For Heads with Mitchell Base
- Single-Stage, 2-Section Legs
- Supports up to 210 lb
- 29 to 61" Height Range
- Alloy Construction
Usually Ships in 2 - 3 Weeks
You Pay:
$2,499.00
Miller HDC 150 1-St Tall Alloy to suit HD Ground Spreader (2130)
- 150mm bowl.
- 1-stage rotary lock leg extension.
- Heavy duty black anodised alloy tubing.
- Integrated stainless steel spikes.
- Suited for HDC Ground spreader or dolly.
Usually Ships in 2 - 3 Weeks
You Pay:
$1,929.00
Miller 2111 HDC MB 1 Stage Tall Alloy
- Mitchell base.
- 1-stage rotary lock leg extension.
- Heavy duty black anodised alloy tubing.
- Integrated stainless steel spikes.
- Suited for mid-level spreader or dolly.
Usually Ships in 2 - 3 Weeks
You Pay:
$2,499.00
Miller Articulated Pan Handle with Extender for Cineline 70 Fluid Head (38cm)
- Multi-positional pan handle grip
- Includes 1234 pan handle short grip for dual control
- Includes 1238 serrated handle clamp extender
Usually Ships in 2 - 3 Weeks
You Pay:
$1,329.00
Miller Short Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (3cm)
- For AIR, DS10, DS20, Compass, CompassX
- Short Plate Size
- 1.2" of Travel
- 1/4"-20 and 3/8"-16 Camera Screws
- Sliding Quick Release Design
Usually Ships in 2 - 3 Weeks
You Pay:
$94.95
Miller HDC 100 1-Stage Short Metal Alloy Tripod (Mid-Level Spreader Ready)
- For Heads with 100mm Bowl
- One-Stage, Two-Section Legs
- Supports up to 210 lb
- 12.4 to 35.2" Height Range
- Outfitted for Mid-Level Spreader
Usually Ships in 2 - 3 Weeks
You Pay:
$1,549.00
Miller Hexagonal Transport Case for Heavy Duty 3350 Tripod (Black)
- For Miller 3350 Tripod
- Durable, Moulded Plastic ABS
- Woven Nylon Straps with Steel Rivets
- Side Grab Handle
- Upright Standing
Usually Ships in 2 - 3 Weeks
You Pay:
$779.00
Miller 2111G HDC MB 1 Stage Tall Alloy
- Mitchell base.
- 1-stage rotary lock leg extension.
- Heavy duty black anodised alloy tubing.
- Integrated stainless steel spikes.
- Suited for HDC Ground spreader or dolly.
Usually Ships in 2 - 3 Weeks
You Pay:
$2,499.00
Miller 466 Hi Hat with 100mm Bowl
- Supports Up to 55 lb (25 kg)
- Bolts into Board or Other Surface
Usually Ships in 2 - 3 Weeks
You Pay:
$679.00