MakerBot 1.75mm PLA Filament (Small Spool, 0.2 kg / 0.5 lb, Neon Orange)
Product #26790
SKU MP06051
Usually ships in 3 - 5 working days


MakerBot 1.75mm PLA Filament (Small Spool, 0.2 kg / 0.5 lb, Neon Orange)

Product #26790 | SKU MP06051
Usually ships in 3 - 5 working days

MakerBot Replicator Mini Compatible


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The 1.75mm neon orange PLA Filament from MakerBot is a bioplastic derived from corn. It's guaranteed not to have any heavy metals, phthalates, or BPA (Bisphenol A). The small spool provides 0.5 lbs (0.2 kg) of PLA plastic filament.

The MakerBot PLA Filament is comprehensively quality-tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that the MakerBot MakerWare software offers and will reliably slice and print every type of 3D printing available.

If you're new to 3D printing, the MakerBot PLA Filament is a good material to start with. The MakerBot PLA Filament also adheres well to acrylic and to blue painter's tape. Prints with a large bottom may have a tendency to curl. To prevent curling, use rafts.

To ensure high filament quality and performance, store the MakerBot PLA Filament in a cool, dry place when not in use. This is because the MakerBot PLA Filament will absorb moisture from the air if exposed to humidity for long periods of time. Also, your build plate must be level, clean, and oil-free to ensure the highest quality 3D printing. It is also recommended that you use the MakerBot PLA Filament and your MakerBot 3D printer in a well-ventilated area.

Specifications

Colour
Neon Orange
Compatible Printers
MakerBot Replicator Mini
Temperature
Glass Temperature
140 - 149°F / 60 - 65°C

Melting Temperature
302 - 320°F / 150 - 160°C

Nozzle Temperature
446°F / 230°C
Diameter
0.068" / 1.75 mm
Weight
0.5 lbs / 0.2 kg

Reviews

Own or use this product?
Give it a rating

Reviews

Own or use this product?
Give it a rating
Product:
MakerBot 1.75mm PLA Filament (Small Spool, 0.2 kg / 0.5 lb, Neon Orange)
Manufacturer:
Makerbot
Model:
MP06051
SKU:
MP06051
RM Product #:
26790