Rubber Monkey

DPA Microphones 5006A Surround Microphone Kit has been discontinued, here are some related products you might like:

DPA Microphones 4006A Omnidirectional Microphone

DPA Microphones 4006A Omnidirectional Microphone

$4,319
Special Order Usually ships in 3 - 4 weeks
DPA Microphones 3506A Stereo Kit with 4006A Omnidirectional Microphones

DPA Microphones 3506A Stereo Kit with 4006A Omnidirectional Microphones

$11,699
Special Order Usually ships in 3 - 4 weeks
DPA Microphones d:dicate 4007A Omnidirectional Microphone (12mm)

DPA Microphones d:dicate 4007A Omnidirectional Microphone (12mm)

$3,259
Special Order
DPA Microphones 4018A Supercardioid Microphone with Clip and Windscreen

DPA Microphones 4018A Supercardioid Microphone with Clip and Windscreen

$3,279
Special Order Usually ships in 3 - 4 weeks
DPA Microphones ST2006A Matched Stereo Pair of 2006A Omnidirectional Microphones

DPA Microphones ST2006A Matched Stereo Pair of 2006A Omnidirectional Microphones

$3,679
Special Order Usually ships in 3 - 4 weeks
Home Music & Audio Microphones Microphone Kits

DPA Microphones 5006A Surround Microphone Kit

Product #61971 | SKU 5006A | DPA Microphones
| Write a review
This product is no longer available what does this mean?
DPA Microphones 5006A Surround Microphone Kit
Not currently for sale
Contact us for more information
This product is no longer available what does this mean?

Features

  • 5 Matched 4006A Omnidirectional Mics.
  • Matched Within 0.5 dB Frequency Response.
  • For Decca Tree Orchestral Recording.
  • Includes Holders, Grids, & Windscreens.

Description

The DPA Microphones 5006A Surround Microphone Kit includes five 4006A omnidirectional microphones, matched within 0.5dB on both frequency response and sensitivity. They can be used for AB stereo, Decca Tree, or surround main array recording techniques for orchestral settings. DPA includes mic holders, grids, and windscreens for all mics. The included Peli foam-lined case can be used for transportation and storage.

Key Features:

  • 5 carefully matched microphones.
  • Suitable for Decca Tree and rear omni surround array.
  • Especially useful for acoustically accurate reproductions.
  • Peli case for transportation and protection.

Specifications
Transducer Pressure, Pre-Polarised Condenser
Polar Pattern Omnidirectional
Frequency Response 10 Hz to 20 kHz
Sensitivity Nominal ± 2 dB at 250Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
EIN Equivalent Noise Level, A-Weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent Noise Level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
Signal-to-Noise Ratio Typ. 79 dB(A)
THD < 1 % up to 139 dB SPL peak
Minimum Load Impedance 2k ohm
Dynamic Range Typ. 124 dB
Max Input Sound Level (SPL) 147 dB
Attenuation / Gain Switchable attenuator: 0 dB / -20 dB
Output Impedance < 200 ohm
Cable Drive Capability Up to 328' (100m) with DAD6001 XLR adapter
Output Connector: 3-pin XLR
Output Balance Principle: Impedance balancing with Active Drive
Common Mode Rejection > 60 dB
Colour Matte Black
Power Supply Power Supply: 48 V Phantom Power (+/- 4 V)
Current Consumption: 2.8 mA
Output Voltage: > 4 V
Polarity +V at Pin 2 for positive sound pressure
Temperature Range -40 ° to 122 °F (-40 ° to 50 °C)
Relative Humidity Up to 90%
Dimensions (Diam. x L) 0.63 x 6.70" (16.00 x 170.00 mm)
Weight 5.7 oz (163.0g)

In The Box

  • DPA Microphones 5006A Surround Microphone Kit.
  • DPA Microphones 4006A Omnidirectional Microphone.
  • Peli Case.
  • Holders.
  • Grids.
  • Windscreens.

Reviews

0.0 (no ratings yet)

Details

  • Product: DPA Microphones 5006A Surround Microphone Kit
  • Manufacturer: DPA Microphones
  • Model: 5006A
  • SKU: 5006A
  • RM Product #: 61971
Recently Viewed
View All