DPA Microphones MMP-B Preamplifier
Special Order
Related Products
Features
- Modular Output Stage for MMC Capsules
- Low Cut & High Boost Filters
- Phantom Powered: 48V
Description
The DPA MMP-B Preamplifier is a preamplifier and output stage for DPA Reference Standard MMC series capsules. The modular capsules attach to the MMP-B and the preamplifier provides an XLR output, high quality output signal and 48V phantom power (via external source).
Key Features:
Compatible with the Following Capsules
- MMC4006 Omni Microphone Capsule
- MMC4011 Cardioid Microphone Capsule
- MMC4015 Wide Cardioid Microphone Capsule
- MMC4017 Shotgun Microphone Capsule
- MMC2006 Twin Diaphragm Omni Microphone Capsule
- MMC2011 Twin Diaphragm Cardioid Microphone Capsule
Specifications
| Output Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Low-Cut Filter | -3 dB: 50Hz |
| Noise | Noise with shorted input, A-weighted: 1.1 µV |
| Power Supply | 48 V Phantom power (± 4 V) Output voltage, RMS: > 1.8V Output voltage, peak: > 2.5V Type of electronic circuit: Active Current consumption: 4.5mA |
| THD | @1VRMS, 1kHz: < 0.5 % |
| Dynamic Range | 124 dB |
| Filters | High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz |
| Output Impedance | < 150 ohm |
| Output Balance Principle | Signal balanced |
| CMRR | > 40dB |
| Temperature | -40 to 113 °F (-40 to 45 °C) |
| Relative Humidity | Up to 90% |
| Cable Drive Capability | 328' (100m) |
| Colour | Matte Black |
| Dimensions (LxDiameter) | 3.9 x 0.75" (99 x 19mm) |
| Weight | 1.3 oz (38g) |
In The Box
- DPA Microphones MMP-B Preamplifier
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DPA Microphones MMP-B Preamplifier
- Manufacturer: DPA Microphones
- Model: MMP-B
- SKU: MMP-B
- RM Product #: 75688
Recently Viewed
View AllDPA Microphones MMP-B Preamplifier
Loading...
