Electro-Voice ETX-10P Portable Powered Loudspeaker

Product #29999 | SKU F.01U.287.359 | Electro-Voice
In Stock with Supplier Usually ships in 2 - 3 working days what does this mean?
Our Price $4,179.00
In Stock with Supplier Usually ships in 2 - 3 working days what does this mean?
- +

Email me when stock arrives

Shipping & Availability
Usually ships in 2 - 3 working days. Deliver to Auckland for $40.00 Change location
Click & Collect Availability
Wellington Out of stock. Pickup in 3 - 4 working days
Click & Collect

Overview

2,000W Power Rating, 134dB Peak SPL, 10" Woofer, Lockout Mode

Description

The EXT-10P Portable Powered Loudspeaker from Electro-Voice is a portable powered Class-D loudspeaker that can be used as a floor monitor, mounted on a tripod, or suspended from the ceiling. It is capable of up to 2,000-watts of output for a peak SPL rating of up to 134dB and features a 10-inch woofer and a 1.25-inch titanium high-frequency driver. The speaker's integrated DSP can be controlled via the rear panel LCD as provides AEQ, boundary compensation, a limiting function, delay, and more.

Featuring Electro-Voice's SST waveguide, the EXT-10P has a uniform beamwidth, allowing for even distribution of sound thanks to the time-alignment of the high and low-frequency transducers. Sturdy construction is provided in the form of the die-cast aluminium chassis, pole cup, and handles.

Key Features

Signal Synchronised Transducers (SST) Waveguide Design

*

  • The waveguide is placed forward in the enclosure to help physically time-align the LF and HF transducers, minimising the need for latency correction via DSP
  • Placing the port under the waveguide positions it in its ideal acoustic location in the enclosure without spacing the woofer and driver apart. The port location minimises distortion and standing waves inside the loudspeaker
  • All waveguides are optimised using simulation software and proprietary algorithms for precise control and lowest distortion

High-Sensitivity, Low-Distortion Transducer Design

*

  • All ETX woofers use Faraday rings for better vocal reproduction
  • The woofers not only have high power handling but also feature a robust mechanical design to ensure long-term reliability
  • EV focuses on engineering transducers with linear frequency response, minimising the need for additional equalisation

Components and Testing

*

  • All ETX components are designed from the ground up by Electro-Voice. No off-the- shelf components are used
  • The handles, pole cups and amplifier chassis are die-cast aluminium, not plastic
  • 18-mm, 13-ply birch plywood with EVCoat is used throughout the ETX product line
  • In addition to industry-standard pink noise abuse tests, all models must survive EV's proprietary 1,000-hour torture test that uses real-world signals driven beyond full output

Processing and Control

*

  • System DSP presets support quick and easy setup via selections for type of use, crossover frequencies and top/sub combinations
  • ETX employs the same proprietary PAL and TEMP limiters developed for Electro Voice's concert loudspeakers
  • Boundary compensation filters are included so that an ETX loudspeaker sounds the same whether it is used as a floor monitor, on a tripod or suspended from a ceiling
  • ETX offers user-adjustable features including delay out to several hundred feet, three-band parametric equalisation, polarity and multiple high-pass crossover points
  • The Class-D design of the amplifier is designed to be efficient and features blower-controlled thermal management, allowing it to work in hot environments. The fan is of a quiet design and does not turn on under normal circumstances
  • Lockout mode helps prevent casual users from changing settings

LCD Interface

  • Complete full-function DSP control via a single-knob interface. LCD screen for easy system set-up and monitoring: location/application AEQ presets, limiter status, input level controls/metres and master volume control to ensure optimal gain structure

Specifications

Frequency Response
85 Hz to 20 kHz (-3 dB)
65 Hz to 20 kHz (-10 dB)
Maximum SPL
134 dB, peak
Coverage
90° x 60° (H x V)
Power Rating
2,000 W
Transducer
LF: 10" (254 mm)
HF: 1.25" (31.75 mm) titanium compression driver
Crossover
1700 Hz
Connectors
2x Combo XLR/TRS jacks
1x XLR Link output
Enclosure
0.7" (18 mm), 13-ply birch plywood with EVCoat
Grille
16 AWG steel with powdercoat
Suspension
8x M10 suspension points
Power Consumption
100 - 240 V, 50 - 60 Hz, 1.6 - 0.8 A
Dimensions (HxWxD)
526 x 330 x 365 mm (21 x 13 x 14")
Weight
20.3 kg (44.8 lb)

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: Electro-Voice ETX-10P Portable Powered Loudspeaker
  • Manufacturer: Electro-Voice
  • Model: ETX-10P
  • SKU: F.01U.287.359
  • RM Product #: 29999
  • Warranty: Click here for warranty terms view terms

Recently Viewed

View All