Elinchrom ELB 1200 Power Pack with Battery has been discontinued, here are some related products you might like:
Elinchrom ELB 1200 Power Pack with Battery
Overview
Description
With its sleek, modernised casing and reduced form factor, Elinchrom introduces the powerful, portable ELB 1200 Power Pack with Battery . The power pack, lithium-ion battery, charger, and sync cord are included. The pack's good looks and convenience features are backed by high performance. Speed is the operative word. The pack can deliver its 1200Ws symmetrically or asymmetrically in 1/10 or 1 stop increments with 8.5 stops of power variability from 7 to 1200Ws. There are three flash modes: Eco, Default and Fast, and the pack recycles to full power in 1.7 seconds in Fast Mode. Flash duration is an action-stopping 1/8850 second at 33% power with the optional Action Flash Head.
Elinchrom has redesigned the separately purchased Action, Hi-Sync, and Pro flash heads with use with the ELB 1200 in mind. The Hi-Sync head is optimised for HS shooting up to 1/8000 second, while the Pro head will give you 1/5050 second flash duration at 140Ws. True to its name, the Action head will give you the fastest flash duration of 1/8850, when set to 172Ws. Each fan-cooled head is outfitted with a bright LED modelling light that draws minimal power from the pack. The ELB 1200 has settings on its OLED display for On, Free (selectable level), Timer (1-60 sec), Proportional (to power level), and Dimming (from 5 to 100%).
Triggering options include a 3.5mm sync port, but the EL 1200 has a built-in EL Skyport receiver that will allow you to wirelessly fire the unit at distances up to 656' with the addition of an EL Skyport transmitter.
The EL 1200 runs on your choice of two separately purchased lithium-ion batteries. The standard Air battery will give you 215 full-power flashes and 80 minutes of run time for the LED modelling light. The more powerful HD battery provides 400 full-power flashes and 120 minutes of run time. One of these batteries and a charger are required for use of the ELB 1200.
The Lithium-Ion Battery Air for ELB 1200 Pack from Elinchrom is a power source for the ELB 1200Ws battery powered pack. It will provide 215 full-power flashes and an 80-minutes LED run time for the optional flash head's modelling light.
The Charger for ELB 1200 Lithium-Ion Battery from Elinchrom recharges the Air or HD batteries that provide power for the ELB 1200 Battery Pack. Charging time is 1.5 hours for the Air battery and 2.5 hours for the HD battery. A full charge gives the Air battery 215 full-power flashes and 80 minutes of LED run time. It gives the HD battery 400 full-power flashes and 120 minutes of LED run time.
This is an Elinchrom 3.5 mm Jack to EL-Amphenol Sync Cord. It is 5 m long, and it is used to hardwire Elinchrom flash packs or monolights in cases where the units are too far-spread for the optical slaves to function. It may also be used in cases where your radio slave is ineffective, or not allowed.
Features
- 18 x 13 x 28 cm (with battery)
- 3.2 kg (without battery)
- Large OLED control display
- Fast recycling times (1.7 seconds in Fast Mode, 3 seconds in Default Mode)
- Strobo, sequence, and delayed flash mode
- USB for firmware updates
Specifications
ELB 1200 Power Pack | |
Maximum Watt/Seconds | 1200 Ws |
Flash Variability | 8.5 stops 7 - 1200 Ws in 1 stop or 1/10 stop increments |
Distribution | Asymmetrical 2:1 or Symmetrical |
Guide Number | F-stop at 1.0 m, 100 ISO, 48° reflector Pro 128, Action 90.6, Hi-Sync 128 |
Recycle Time | Full-Power Recycling: Fast: 1.7 sec Default: 3.0 sec Eco: 6.0 sec |
Flash Duration | 1/8850 sec at 33%, power setting 4.7 (Action Head) |
Head Outlets | 2 |
Colour Temperature | 5500K with optional flash head |
Modelling Light | LED in flash head On, Free, Proportional, Timer 1-60 sec, VFC, Dimming 5-100% |
Display | OLED |
USB | Yes for firmware updates USB output for devices (5 V in Shipping mode) |
Weather Resistant | Yes |
Triggering | 3.5 mm EL-Amphenol sync cord Built-In EL Skyport Radio Receiver: 20 channels, 4 groups |
Sync Voltage | 5.0 V |
Power Stability | +/- 0.03 % |
Auto Dump | Yes |
Battery | Optional Air: Lithium-ion 36V, 2.5 Ah, 90 Wh Optional HD |
Battery Life | With Optional Air Battery 215 full-power flashes, 80-minute LED modelling light run time With Optional HD Battery 400 full-power flashes, 120-minute LED modelling light run time |
Dimensions | 18 x 13 x 28 cm with optional battery |
Weight | 3.2 kg without battery |
Lithium-Ion Battery Air for ELB 1200 Pack | |
Weather Resistant | Yes |
Battery | Lithium-ion 36 V, 2.5 Ah, 90 Wh |
Battery Life | 215 full-power flashes, 80-minute LED modelling light run time |
Recharge Time | 1.5 hours |
USB | Yes Output for Devices: 5 V |
Dimensions | 13 x 18 cm |
Weight | 1.1 kg |
Charger for ELB 1200 Lithium-Ion Battery | |
Voltage Requirements | 100 - 240 VAC, 50/60 Hz |
Charge Time | Air Battery: 1.5 hr. HD Battery: 2.5 hr. |
Number of Flashes at Full Power | Air Battery: 215 HD Battery: 400 |
Run Time | For LED Modelling Lights Air Battery: 80 min. HD Battery: 120 min |
In The Box
- ELB 1200 Power Pack
- Lithium-Ion Battery Air for ELB 1200 Pack
- Charger for ELB 1200 Lithium-Ion Battery
- Sync Cord - Male 3.5mm to Elinchrom Amphenol 5 m
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Elinchrom ELB 1200 Power Pack with Battery
- Manufacturer: Elinchrom
- Model: 10289.1.AU
- SKU: 10289.1.AU
- RM Product #: 57413
- Warranty: 2 year manufacturer warranty