FiiO X5 (2nd Gen) Portable High-Resolution Audio Player (Gold)
Overview
Description
The gold X5 (2nd Gen) from FiiO is a portable high-resolution audio player and USB DAC for audio enthusiasts. The unit features an audiophile-grade architecture and premium components capable of playing files up to 24-bit/192 kHz in a variety of formats including native DSD, WAV, WMA, ALAC, FLAC, APE, AIFF, and more.
The X5-II utilises a Texas Instruments PCM1792A DAC coupled to an OPA1652 for great dynamic performance, while the FET inputs for I/V conversion offer extra-low distortion and noise. Additionally, two top-flight OPA1612 chips provide low pass filtering and voltage amplification for extra-low distortion and noise. The headphone output employs two BUF634U chips for current buffering, resulting in a sufficient drive current for a wide sound stage, high dynamics, and good bass power. Dual crystal oscillators ensure the lowest jitter and highest precision playback of music at any sample rate, eliminating conversion artefacts.
The player offers a standard 1/8" / 3.5mm headphone output and a separate line out/digital (coaxial) out via 1/8" / 3.5mm. The X5-II has no on-board memory, but uses two microSD card slots supporting up to 256GB total. The 3300mAh Li-polymer battery provides up to 10 hours of playback under normal conditions. The user interface offers five unique themes, while the classic scroll wheel and 2.4" HD IPS colour display offers easy navigation. You can browse and play songs via folders, songs, albums, artists, genres, favourites, and playlists. The 10-band graphic AEQ and the 120-step digital volume control allow for custom-tailored sound and levels.
The X5-II is 15% lighter and 12% smaller than the original X5. The chassis is made of aluminium alloy and features a high-reflectance, fine-grain faceplate. The X5-II ships with a 3' / 1m high-current micro-USB data/charging cable, an 1/8" / 3.5mm coaxial S/PDIF adapter, a black silicone case, three screen protectors (1 applied in-factory), an HDtracks coupon, and a set of three Bodywork stickers (USA flag, wood grain, and carbon fibre).
Features
- Song Playback - Supports Browsing and Playback via Folders:
- All Songs
- Albums
- Artist
- Genres
- Favourites
- Playlists
- Play Mode: Sequential, Shuffle, Loop Single, Loop All
- Resume After Power Off: Can resume from last song or last position before power off
- Library Management:
- Supports adding and managing favourites and playlists on player
- Supports deleting favourites, playlists, songs and folders on player
- Supports batch deletion
- Hibernation: Player can automatically enter hibernation for instant wake-up / playback with minimal battery drain
- Screen Saver: Custom defined screen timeout time
- CUE Sheet Supported: Supports splitting songs by CUE sheets and skipping though tracks within cue sheet
- Themes: 5 different built-in themes
- Playback Display: Supporting embedded / external / folder-based album art, lyrics and ID3 display
- Gapless playback supported
- Volume Control: 120 steps digital potentiometer
- Output Protection: Power supply safety control over analogue circuit
- Gain Setting: Switchable between high and low gain
- Equaliser: 10-band AEQ (±6 dB)
- Hearing Protection: Customisable max volume setting to protect hearing
- Balance: Max bias 10 dB L/R (1 dB increments)
- On / Off Transients: Output relay prevents on / off transients
- Headphone Detection: Playback pauses on headphone disconnection
- Internal Battery: 3300mAh 3.7V Li-polymer
- Playtime: >10 hours (32 ohms; normal volume with display off)
- Firmware upgrade via microSD card (formatted in FAT32)
- Data Transfer: micro-USB 2.0 high speed
Specifications
Line Out | 1/8" / 3.5 mm (Shared line out / S/PDIF coaxial out) |
Digital Output | 1/8" / 3.5 mm (Shared line out / S/PDIF coaxial out) |
DAC | USB DAC: Supports up to 24-bit / 192 kHz and DSD (driver installation required) |
Headphone | 1/8" / 3.5 mm |
THD + N | <0.001% (1 kHz) |
Frequency Response | 20 Hz to 20 kHz |
Crosstalk | >115 dB (10 kOhms / 1 kHz) |
Signal to Noise Ratio (SNR) | =114 dB (A-weight) |
Dynamic Range | =110 dB |
Line Output Level | 1.53 Vrms (10 kOhms / 1 kHz) |
Output Power | Output Power 1: >245 mW (32 ohms / THD+N <1%) Output Power 2: >436 mW (16 ohms / THD+N <1%) Output Power 3: >27 mW (300 ohms /THD+N <1%) |
Frequency Response | 20 Hz to 20 kHz |
Signal-to-Noise Ratio (SNR) | =117 dB (A-weighted) |
Output Impedance | <0.2 ohms (32 ohms) |
Crosstalk | >75 dB (1 kHz) |
THD+N | <0.001% (1 kHz) |
Maximum Output Voltage | >8.2 Vp-p |
Maximum Output Current | >250 mA (For reference) |
Power | USB Charger: 5 VDC, 2 A (recommended) |
Battery Charge Display | Red light indicates, green light turns on after fully charged |
Battery Display | Yes (accurate battery % readings) |
Battery Capacity | 3300 mAh, 3.7 V Li-polymer |
Battery Life | >10 h (32 ohms; normal volume with display off) |
Charging Time | USB Charger: Approximately 4 hours |
Audio Formats | Lossless DSD: DSD64, DSD128 (.iso, .dsf & .dff) APE (Fast): 192 kHz/24-bit APE (Normal): 96 kHz/24-bit APE (High): 96 kHz/24-bit FLAC: 192 kHz/24-bit WAV: 192 kHz/64-bit WMA Lossless: 96 kHz/24-bit Apple Lossless: 192 kHz/24-bit Lossy Compression MP2, MP3, AAC, ALAC, WMA, OGG |
Material of Construction | Aluminium alloy |
Chipset | SoC: JZ4760B DAC: PCM1792A LPF: OPA1612 OP: OPA1612+BUF634 Volume Controller: PGA2311A |
Memory Capacity | 256 GB total via 2x microSD cards |
Display | 2.4" / 6.1 cm, 262,144-colour HD IPS screen with 400x360 resolution |
Drive Ability | 16 to 150 ohms |
Volume Control | 120 steps digital potentiometer |
Equaliser | 10-band equaliser (±6 dB) |
Balance Control | 10 dB |
Gain | Gain Low: 3.6 dB Gain High: 9.1 dB |
Dimensions (L x H x D) | 4.3 x 2.5 x 0.6" / 109.0 x 63.5 x 15.3 mm |
Weight | 5.8 oz / 165.0 g |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: FiiO X5 (2nd Gen) Portable High-Resolution Audio Player (Gold)
- Manufacturer: FiiO
- Model: X5-II-GOLD
- SKU: X5-II-GOLD
- RM Product #: 36853