Genaray SpectroLED Three Light Interview Kit (100-240VAC/12VDC)

Description

The SpectroLED SpectroLED Three Light Interview Kit by Genaray includes one 9.0" and two 14" LED lights, diffusers, cables, power sources and 3 light stands. A 5.4" Mini Boom and a 5/8" stud adapter are supplied so that you can use one of the SpectroLEDs overhead or at an offset angle. All of the fixtures offer 0-100% dimming and a 60 degree beam angle. Each light comes with a 100-240VAC power supply but if you need to shoot in out of the way locations you'll find its DC (battery) capability handy. A cigarette lighter adapter cord is included for each light to that end. Just add your choice of optional 12V battery.

With a beam angle of 60°, the SpectroLED-14 Light from Genaray is composed of a daylight-balanced fixture equipped with 1140 LEDs. The round 14.5" light provides 10-100% dimming with a maximum power output of 75W.

In a field dominated by rectangular or square arrays, Genaray has made the wise choice of making their studio lights circular. Not only does the increased surface area have more wrap-around light characteristics but the shape renders pleasing, natural-looking catchlights in your subject's eyes. And if you're doing portraiture, you can soften the SpectroLED-14's output by slipping the included 3/4 stop diffusion sock over the reflector. Heat is never a concern since the cool-running LEDs are barely warm to the touch.

Another way to soften the quality of light is to use the umbrella socket that is built into the mount. You can use reflective or translucent umbrellas for bounce or shoot-through effects. The socket accepts 7 or 8 mm shafts and the mount has a 65-degree tilting range for perfect placement.

Power is provided by an included multi-voltage power supply and adapter that accepts 100-240 VAC. The inclusion of a cigarette lighter adapter cord also gives you the option of using 12V batteries for convenience or location shooting. You can run the SpectroLED-14 for approximately 70 minutes on an average fully charged battery. Not only are you saving money every time you use the SpectroLED-14 due to its low current draw, but with a 50,000-hour lamp life the SpectroLED-14 is virtually maintenance-free. The light mounts to any compatible 5/8" baby pin stand and can be operated with an optional remote dimmer that connects via a 12.8' cable.

The SpectroLED-9 Light (100-240 VAC/12 VDC) by Genaray is built around a 10-100% dimming fixture with a 60° beam angle. 500 LEDs output an impressive brightness equivalent many times its nominal 35W rating.

In a field dominated by rectangular or square arrays Genaray has made the wise choice of making studio lights circular. Not only does the increased surface area have more wrap-around light characteristics but the shape renders pleasing, natural-looking catchlights in your subject's eyes. And if you're doing portraiture you can soften the SpectroLED-9's output while widening its native 60-degree coverage by slipping the included 3/4 stop diffusion sock over the reflector. Heat is never a concern since the cool-running SpectroLED-9 is barely warm to the touch.

Another way to soften the quality of light is the umbrella socket that's built into the mount. You can use reflective or translucent umbrellas for bounce or shoot-through effects. The socket accepts 7 or 8 mm shafts and the mount has a 65-degree tilting range for perfect placement.

Power is provided by the included multi-voltage power supply/adapter. The inclusion of a cigarette lighter adapter cord also gives you the option of using 12V batteries for convenience or location shooting. You can run the SpectroLED-9 for approximately 300 minutes on an average fully charged battery. Not only are you saving money every time you use the SpectroLED-9 due to its low current draw, but with a 50,000-hour lamp life the SpectroLED-9 is virtually maintenance-free.

Note: Runtime is approximate depending on battery selected

This Impact Air-Cushioned Light Stand is a black anodised aluminium support that rises to a height of 3 m and folds down to 85 cm for storage and transport. The stand will handle up to 3.8 kg and is topped with a 5/8" stud with 1/4"-20 threads. It has a wide footprint of 96.5 cm for greater stability. Air cushioning gently lowers the light when making height adjustments to protect equipment and fingers.

This Impact Mini Boom Arm is an aluminium lightweight boom arm with a 454 g counterweight and swivel handle light stand mount. It can hold a small light fixture.

Features

• Round, 14.5" LED fixture with daylight colour temperature of 5600K
• Beam angle of 60° for versatile use as a main or secondary light
• Accepts an included 3/4 diffusion sock that goes over the reflector and optional umbrellas via a dedicated socket
• Can be dimmed from 10 to 100% with on-board control knob
• Runs on 100-240 VAC power with included adapter, or on optional batteries via D-tap connection
• Mounts to any compatible light stand with standard 5/8" baby pin

AC or DC Operation
The SpectroLED-9 comes with a 100-240 VAC power source but if you need to shoot in out of the way locations you'll find its DC (battery) capability handy. A cigarette lighter adapter cord is included. Just add your choice of optional 12V battery.

Umbrella Mount
The SpectroLED-9's stand mount has an umbrella socket built into it giving you additional creative options.

Optional Remote Dimming
Squeezing the SpectroLED-9 into tight spaces is no problem. The optional Remote Dimmer gives you the same 10-100% dimming options that you have on the light's control panel but with a 12.8' cable. Operate 1 or several remote equipped SpectroLEDs from remote or central locations. It's also great for controlling a light that's mounted overhead.

Air-Cushioned
Protects equipment and fingers from damage

Compact Design
Will fit easily into most location cases

Accepts Casters
For easy positioning of lights