JBL Commercial Solutions Series CSS-H30 30W Paging Horn
this item may be nonreturnable
Overview
Description
The JBL Commercial Solutions Series CSS-H30 30W Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm, and industrial applications. Designed for demanding environmental conditions, the IP65-rated CSS-H15 is highly weather resistant, so it can be used in either indoor or outdoor applications. The focused coverage pattern is suitable for applications that require long throw capability. This paging horn is suitable for public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centres, civic centres, and other commercial sound and protective-signalling systems.
The CSS-H30 Paging Horn includes a UL-registered 30W multi-tap transformer for use with 70V or 100V distributed speaker lines. The power tap switch is screwdriver-adjustable for easily changing settings from 30W, 15W, 7.5W, 3.8W (and 1.9W at 70V only). For non-distributed systems there is an 8Ω bypass position. Connection is via bare wire on a built-in jacketed cable with water-tight entrance to the speaker. The transducer diaphragm is made of sturdy phenolic material to enhance durability, especially in outdoor applications, and to resist deformation under stressful temperature conditions. To further increase reliability, a 350 Hz high-pass filter is built-in to protect the paging horn against damage from frequencies below the operational frequency band. The horn is made of sturdy ABS plastic and the exterior hardware is made of corrosion-resistant stainless steel.
Key Features:
- Excellent voice range clarity for announcement and paging
- High sensitivity delivers high sound levels with minimal power amplification
- Wide 50° horizontal by 70° vertical coverage for long throw capability
- Phenolic diaphragm driver for outdoor durability and high reliability
- UL-registered 30W multi-tap transformer, with 8Ω direct bypass
- Built-in high-pass filter enhances reliability by protecting against low frequency damage
- IP65-rated weather-resistant with included stainless steel bracket and hardware
- Colour: RAL9016 (horn and bracket)
Specifications
System | |
Frequency Response | -10 dB: 380 Hz to 6 kHz (based on average 1 kHz to 6 kHz sensitivity) |
Coverage Pattern | 50° (H) x 70° (V) (at 2 kHz and averaged 1 kHz to 4 kHz) |
High-Pass Filter | Included: Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range |
Directivity Factor | 15.8 (2 kHz) |
Directivity Index | 12 (2 kHz) |
Power Rating | 30 W (120 W peak), 100 hours |
Sensitivity | 1 W, 2.83 V @ 3.3' (1.0 m): 108 dB, average 1 kHz to 6 kHz; 112 dB at 2 kHz |
Maximum SPL | 3.3' (1.0 m): 123 dB continuous averaged (129 dB peak), 1 kHz to 6 kHz 127 dB continuous average (133 dB peak), 1.4 kHz, 30 W input, 8 Ω setting |
Nominal Impedance | 30 W / 70 V, NC / 100 V Tap: 167 Ω 15 W / 70 V, 30 W / 100 V Tap: 333 Ω 7.5 W / 70 V, 15 W / 100 V Tap: 667 Ω 3.8 W / 70 V, 7.5 W / 100 V Tap: 1333 Ω 1.9 W / 100 V, 3.8 W / 100 V Tap: 2666 Ω 8 Ω at 8 Ω direct setting |
Transformer Taps | 70 V: 30 W, 15 W, 7.5 W, 3.8 W, 1.9 W 100 V: 30 W, 15 W, 7.5 W, 3.8 W |
Transducers | |
Driver | Full-Range: 1.5" (3.8 cm) diameter with phenolic diaphragm |
Physical | |
Material | Horn: ABS |
Mounting Hardware | Stainless steel powder-coated U-bracket (yoke) with 3 x 0.41" (1.04 cm) diameter mounting holes; stainless steel exterior hardware |
Input Connection Type | 12" (30 cm) pigtail to bare wire; entrance via water-tight fitting Wire colours: Red: Positive (+); Black: Negative (-) |
Environmental | IP65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware |
Safety Agency Approvals | Transformer UL registered per UL1876 "Isolating Signal and Feedback Transformers for Use in Electronic Equipment" |
Dimensions (H x W x D) | Horn Only: 8.2 x 11.2 x 11.3" (20.6 x 28.5 x 28.7 cm) With Mounting Bracket: 8.9 x 11.2 x 11.3" (22.4 x 28.5 x 28.7 cm) (depth excludes cable exit) |
Weight | 4.5 lb (2.0 kg) |
In The Box
- JBL Commercial Solutions Series CSS-H30 30W Paging Horn.
- Stainless Steel Mounting Bracket.
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: JBL Commercial Solutions Series CSS-H30 30W Paging Horn
- Manufacturer: JBL
- Model: Commercial Solutions
- SKU: CSS-H30
- RM Product #: 64848