JBL VMA160 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier (5-In/1-Out)
Features
- 5-Input Mixer.
- Supports USB Drives and Bluetooth.
- 60W, 1-Output Amplifier.
- Euroblock, RCA, and 1/4" Inputs.
- Euroblock Outputs.
Description
The JBL VMA160 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier (5-In/1-Out) is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centres, and retail stores. It features a 5-in/1-out mixer and 60W of output power. It can be installed in a standard 19” equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge.
Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA160 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).
Key Features:
- Suitable for commercial and industrial use
- Euroblock, RCA, and 1/4" TRS input connectors
- Independent bass and treble controls for each output channel
- Voice-activated ducking during announcements
- Remote volume control capability using optional JBL CSR-V module and Cat5e cable with RJ45 connectors
- Priority muting using PTT switch closure
- Configurable output routing
- Barrier block output connections to drive 8 Ohms, 70V or 100V speaker systems
- Media player capable of playing MP3 files from a Bluetooth device or USB drive
Specifications
Output Power | 60 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD) |
Insertion Loss | 70 V and 100 V Outputs: 1 dB maximum |
Input Channels | 5 |
Output Channels | 1 |
Tone Controls | Bass and Treble non-detented potentiometers on each channel Bass: ±14 dB @ 50 Hz Treble: ±14 dB @ 10 kHz |
Input Sensitivity | To obtain full rated power (load of 8 Ohms) Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms |
Frequency Response | Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB |
Total Harmonic Distortion (THD) | Measured at 2.83 Vrms into rated load impedance at any output Power Amp Output: <0.5%, 20 Hz to 20 kHz |
Signal-to-Noise Ratio | >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted) |
Input Impedance | Nominal Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms |
Phantom Power | 27 VDC |
Crosstalk | -70 dB (reference rated power, volume at mid position, 1 kHz) |
Nominal Input Voltages | Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz |
Minimum Load Impedance | Low Impedance Output: 4 Ohms 70 V Output: 80 Ohms 100 V Output: 160 Ohms |
Operating Temperature | 32 to 95°F / 0 to 35°C |
Humidity | 95% RH (non-condensing) |
Storage Temperature | -4 to 185°F / -20 to 85°C |
Dimensions (W x D x H) | 17 x 16.3 x 3.5" / 432 x 415 x 88 mm |
Weight | 19.4 lb / 8.8 kg |
In The Box
- JBL VMA160 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier (5-In/1-Out).
- Rubber Feet.
- Rackmount Kit.
- Mounting Hardware.
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: JBL VMA160 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier (5-In/1-Out)
- Manufacturer: JBL
- Model: VMA160
- SKU: VMA160
- RM Product #: 64852