Ideal lighting kit for location and interview shoots
Our Price $2,549.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$29.75
South Island
$41.25

Ideal for location shooters, the Dracast Tungsten 3-Light Interview Kit with V-Mount Battery Plates and Stands is comprised of 2 x LED500 Pro Tungsten lights, each with a multi-voltage power adapter, soft case, an 8.7' light stand, V-Mount battery plate and battery. A dual charger is included for the batteries. An LED160A Tungsten light is also included with a power supply, built-in Sony NP-F series battery plate, battery, charger and soft case. And, this kit has two filter frames and two filter packs for use with the LED500 lights.

The Tungsten LED160A employs 160 LEDs, with a CRI rating of 95, providing 3,200K output with precise, accurate colour rendering and a beam spread of 45 degrees. It features an aluminium chassis for strength and durability but weighs only 1/2 pound. A built-in dimmer controls light output from 0 to 100% without flicker at any frame rate. A separate knob controls the colour temperature balance of the LEDs. The light runs on AC via an adapter or on NPF-type camera batteries that mount to its built-in battery plate.

At just 1.8 kg the LED500 Pro Tungsten LED Light is an ideal choice for location work, interviews and small sets where colour accuracy, control and flicker-free output are of major importance. A tungsten-balanced colour temperature of 3,200K means users can quickly and easily match natural lighting as well as other lights. Dimming is equally convenient via another knob that adjusts the light intensity from 0-100% with negligible colour shift. The LED500 outputs the hot light equivalent of 500W but you won't have to be concerned about the talent's comfort - the panel runs barely warm to the touch. And the low electrical draw of just 30W means a timely return on your investment. The durable anodized aluminum frame is supported by an oversized, U-shaped yoke with locking knobs on each side and a standard 5/8" receiver. The LED500 can be used worldwide, powered by a 100-240VAC adapter or by optional 12VDC batteries.

Features

  • 3200K tungsten-balanced LED light
  • 160W equivalent light output
  • 45° flood beam angle
  • Approximately 20 ft effective distance
  • >95 CRI
  • Brightness dimmer dial on the rear
  • Integrated L-series battery plate
  • 4-LED indicator on the rear
  • NP-F990 L Series battery (runs approximately 5-6 hours) and charger included

Photometrics

  • 3,800 lux / 353 fc at 3.0' (0.9 m)
  • 1,150 lux / 107 fc at 6.0' (1.8 m)
  • 530 lux / 49 fc at 9.0' (2.7 m)
  • 300 lux / 28 fc at 12' (3.6 m)

Specifications

LED500
MaterialAnodised aluminium
Light SourceLED
Colour Range3200K
CRI95
Dimming100-0%
Beam Angle45°
Power Consumption30 W
Operating Voltage100-240 VAC, 50/60 Hz, 12 VDC
Optional battery: 14.8 VDC
MountYoke with 5/8" (16 mm) receiver
Dimensions12 x 6.0 x 2.0" (305 x 152 x 51 mm)
Weight4.0 lb (1.8 kg)
LED160A
Light Source160 LEDs
Colour Temperature3200K
CRI>95
Beam Angle45° flood
BrightnessApproximately:
1550 lux at 3 ft (0.9 m)
390 lux at 6 ft (1.8 m)
175 lux at 9 ft (2.7 m)
100 lux at 12 ft (3.6 m)
Effective DistanceApproximately 20 ft (6 m)
LED Life Expectancy50,000 hours
Battery PlateIntegrated single battery plate supporting all Sony and third-party L-series batteries
Mount Type1/4"-20 threaded hole
Power Input7.2 - 8.4 VDC
Power ConsumptionApproximately 9.5 W (max)
Dimensions6 x 4 x 2" (15 x 10 x 5 cm)
WeightApproximately 0.5 lb (227 g)
MaterialAluminium
DimensionsApproximately: 12 x 6.0" (30.5 x 15.2 cm)
Product:
Dracast Tungsten 3-Light Interview Kit with V-Mount Battery Plates
Manufacturer:
Dracast
Model:
DR-INTK-TV
SKU:
DR-INTK-TV
RM Product #:
35552
Colour Temperature:
Tungsten