Magewell USB 3.0 Capture Dongle (HDMI) Gen 2
Usually ships in 4 - 6 weeks
Our Price
$683.00
Usually ships in 4 - 6 weeks
Email me when stock arrives
Shipping & Availability
Usually ships in 4 - 6 weeks.
Deliver to
Auckland
for $5.90
Change location
Click & Collect Availability
Wellington
Out of stock.
Pickup in
4 - 6 weeks
Click & Collect
Overview
Record or stream an HDMI signal via USB 3.0
Description
Record or stream an HDMI signal via USB 3.0 with the Magewell XI100DUSB HDMI USB 3.0 Capture Dongle Gen 2 .
If you need to stream or record at a certain resolution, the XI100 will internally up or down-covert the input signal to the set resolution. It can also perform frame-rate conversion and de-interlacing in real-time with its own hardware, taking the processing load off of your computer's CPU.
Because the XI100 uses the existing drivers on your computer, the capture device will work with any software that supports those drivers. If you don't have a USB 3.0 port available, the XI100 will work with a USB 2.0 port, although the resolution and frame rate capabilities will be reduced due to the restricted bandwidth.
Specifications
| Supported OS | Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) |
| Linux (Ubuntu 12.04–16.10, CentOS 7) | |
| OS X 10.9–10.11 | |
| macOS 10.12 | |
| Chrome OS | |
| Supported APIs | Windows: |
| - DirectShow | |
| - Wave API/DirectSound/WASAPI | |
| Linux: | |
| - V4L2 | |
| - ALSA | |
| OS X/macOS: | |
| - QuickTime | |
| - AV Foundation | |
| Supported Software | VLC, VirtualDub, OBS, XSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, Adobe Flash Media Encoder, Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software |
| Input Interfaces | HDMI: |
| - DVI-D 1.0 | |
| - HDMI 1.3 | |
| Output Interfaces | USB 3.0: |
| - compatible with USB 2.0 | |
| -ncompatible with USB 3.1 Gen 1 | |
| Input Features | Support for input video resolutions up to 2048×2160 |
| HDMI Specific Features | 165MHz HDMIreceiver |
| Adaptive HDMI equalizer support for cables lengths up to 30M | |
| Support for customized EDID | |
| Support for extraction ofAVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames | |
| Full colorimetry support | |
| Support for 8/10/12-bit color depth | |
| Support for RGB 4:4:4,YCbCr 4:4:4,YCbCr 4:2:2 color sampling | |
| Support for 2-channel ISC60958 audio streams | |
| Support for extraction of audio formation information & channel status data | |
| Support for extraction of video timing information | |
| Support for extraction of 3D format information | |
| Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode | |
| Video Capture format | Support for capture resolutions up to 2048×2160 |
| Support for output frame rates up to 120fps (Actual output frame rate can be limited by the USB bandwidth and internal working frequency. Typical output frame rates on the Intel USB 3.0 controller are as follows.) | |
| - 1920×1080 YUY2 (up to 75fps) | |
| - 1920×1080 RGB24 (up to 60fps) | |
| Support for YUY2 & UYVY4:2:2 8-bit | |
| Support for RGB24 & RGB32 4:4:4 8-bit | |
| The default capture format is YUY2. More capture format can be set using USB Capture Utility. | |
| Video Processing Features | Video processing pipelines with 160 Mpixels/s processing bandwidth |
| Video cropping | |
| Video scaling | |
| Video de-interlacing | |
| - Weave | |
| - Blend top & bottom field | |
| - Top field only | |
| - Bottom field only | |
| Video aspect ratio conversion | |
| - Auto or manual selection of input aspect ratio | |
| - Auto or manual selection of output aspect ratio | |
| - Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) | |
| Video color format conversion | |
| - Auto or manual selection of input color format & quantization range | |
| - Auto or manual selection of output color format, quantization range & saturation range | |
| - Support for RGB, YCbCr 601, YCbCr 709 color formats | |
| - Support for Limited or Full quantization range | |
| - Support for Limited, Full & ‘Extended gamut’ saturation range | |
| Video frame rate conversion | |
| Vertical flip and mirror | |
| Multiple devices on one computer | Support for connecting multiple USB devices to one system |
| Support for setting the device serial number as the device name shown in the system using USB Capture Utility | |
| SDK | The USB Capture SDK provide functions including signal status extraction, capture configuration, etc. |
| Firmware Upgrade | Multiple devices in one system can be upgraded simultaneously |
| LED Indicator | Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed. |
| Form Factor | 92.2mm (L) x 40.2mm (W) x 12.3mm (H) |
| Power Consumption | 5V max current: ~0.5 A |
| max power consumption:~2.5 W | |
| Working Environment | |
| Operating temperature: 0 to 50 deg C | |
| Storage temperature: –20 to 70 deg C | |
| Relative Humidity: 5% to 90% non-condensing |
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Magewell USB 3.0 Capture Dongle (HDMI) Gen 2
- Manufacturer: Magewell
- Model: XI-100-D-USB-HDMI
- SKU: 32060
- RM Product #: 43410
Recently Viewed
View AllMagewell USB 3.0 Capture Dongle (HDMI) Gen 2
Loading...
