Manfrotto: Accessories

Manfrotto Round Quick Release Plate for Compact Action Tripods

  • Spare or Replacement Part
In stock Ships tomorrow

Manfrotto 200PL Rectangular Plate with 3/8 and 1/4 inch screw

Rectangular Plate with 3/8' and 1/4' screw
In stock Ships tomorrow

Manfrotto 165MV - On-Ground Tripod Spreader

  • For Tripods with Spiked Feet
  • Replaces 3138
In stock Ships tomorrow

Manfrotto 323 RC2 - Quick Change Rectangular Plate Adapter

  • Replaces #3299
  • 1/4" camera fixing screws.
  • Fixing 1/4" and 3/8" thread.
  • 200PL rectangular plate.
In stock Ships tomorrow

Manfrotto 385 - Air Cushioned Table Centre Post

A 2 section air cushioned center column - supports up to 10kg
No supplier stock Usually ships in 4-6 weeks

Manfrotto Set of Two 1/4" Camera Mounting Screws

  • Replacement 1/4" Screws
  • Select Manfrotto Quick Release Plates
Usually ships in 2 - 3 days

Manfrotto 410PL Quick Release Plate - for RC4 Quick Release System

  • Load Capacity of 4 kg
  • Fits RCS/Q2 Adapters
In stock Ships tomorrow

Manfrotto 3/8"-16 Quick Release Plate Screws (2-pack)

  • Replacement Part
  • Quick Release Plate Screws
  • Designed for 501 and 503 Pro Videos Heads
Usually ships in 2 - 3 days

Manfrotto R101,1086 Ratchet handle

Replacement handle
In stock Ships tomorrow

Manfrotto 785PL - Quick Release Plate for Modo/Digi

A wedge-shaped quick release plate with a 1/4 inch attachment.
In stock Ships tomorrow

Manfrotto 565 Rubber Shoe Set

  • Made in Italy
  • Snap these shoes onto your tripod
  • Ideal on slippery or glossy floors
In stock Ships tomorrow

Manfrotto 143S - Flash Shoe

Flash shoe with 1/4 inch male attachment
In stock Ships tomorrow

Manfrotto 200LT-PL Quick-Release Plate

  • Load Capacity: 4 kg
  • Fits RCS/Q2 Adapters
  • Lightweight technopolymer body
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 394 - Quick Release Plate Adapter

  • RC4 Quick Release System
  • Equipped with 2 built-in spirit levels
  • Supplied with 1/4' and 3/8' screws
In stock Ships tomorrow

Manfrotto 131D - Repro Arm for Tripods (Black)

Allows the positioning of two heads on a 90 degree perpendicular angle
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto Cross Arm - 131DD Double End with Double Head Support

Double End with Double Head Support
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 088LBP - Small Adapter

  • Replaces #3367
  • Reducing bushing
In stock Ships tomorrow

Manfrotto 030-14 - Hexagonal Adapter Plate

  • RC0 Quick Release System
  • For 3038, 3039, 3047, 3055, 3055S & 3063
  • Replaces #3049
  • Made from aluminum
In stock Ships tomorrow

Manfrotto 454 - Micro-Positioning Sliding Plate

  • Precise Fore/Aft Positioning
  • Supports 8 kg
In stock Ships tomorrow

Manfrotto 438 - Ball Camera Leveller

Provides fast and easy levelling for tripods - supports up to 15kg
No supplier stock Usually ships in 4-6 weeks

Manfrotto 208 - Platform Adapter for Camera Mounting

Provides a mounting plate with a 3/8 inch screw.
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 627 - Basic Panoramic Head Adapter

Basic adapter that can mount on top of a head monopod or tripod.
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 322RA - Additional Adapter for 322RC2

A replacement quick release or an additional camera adapter.
In stock Ships tomorrow

Manfrotto 300N - Panoramic Rotation Unit

Gives constant-angle shots around a single axis- supporting up to 14kg
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 400PL-HIG - Accessory Plate for Geared Head

A plate that is 42mm high to offer maximum clearance (Indent Only)
In stock Ships tomorrow

Manfrotto MSQ6 Quick Release Adapter with Plate

  • Adds Q6 to 050 and 468 Series Heads
  • Aluminium Construction
  • Includes Camera Plate
In stock Ships tomorrow

Manfrotto 131DDB - Accessory Arm for Four Heads

  • Replaces #3153B
  • Accessory arm for four heads
  • With 3/8" screws
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 166 Tripod Utility Apron

  • Replaces #3146
  • 3 compartments hang
  • Leather belt attachments adjust to most tripod leg diameters
  • Allows for storage space beneath center column
Usually ships in 2 - 3 days

Manfrotto 400PL - LOW Accessory Plate for Geared Head 400PL-LOW

A low profile plate that is only 13mm high (Indent Only)
In stock Ships tomorrow

Manfrotto L Bracket Q2

Helps to stabilize the whole camera set up
No supplier stock Usually ships in 4-6 weeks

Manfrotto Retractable Spiked Foot Set (3)

  • For the 190XB, 190XDB, 190XPROB, 190CX3, 190CXPRO3, & 055CXPRO4 Tripods
  • Tough spike made from durable alloy
  • Hard rubber retractable foot
Usually ships in 2 - 3 days

Manfrotto MSTRAP-1 Tripod Shoulder Strap

  • For 190 and 055 Series Manfrotto Tripods
  • Made of Rubberised Fabric
  • Spring Clip and a Closed Loop
Usually ships in 2 - 3 days

Manfrotto 030-38 - Hexagonal Assy Plate

A standard hexagonal quick-release with a 3/8 inch screw
In stock Ships tomorrow

Manfrotto MSQ6PL Quick Release Plate for Q6 Top Lock System

  • For 054 and 055 Q6 Ball Heads
  • For Q6 Quick Release Adaptor
  • Aluminium Construction
In stock Ships tomorrow

Manfrotto 241 - Pump Cup with Swivel Socket

Suction cup for small fixtures and light equipment - supports 2kg
No supplier stock Usually ships in 4-6 weeks

Manfrotto 241V Suction Grip with Camera Support

  • Replaces #3289
  • Attaches to most non-porous surfaces
  • Ideal camera support for the car or next to a window
  • Holds up to 3 kg
Special Order Usually ships in 6 - 9 weeks

Manfrotto 556B - Levelling Centre Column

Level photo/video head independently from the tripod - 190Pro series
No supplier stock Usually ships in 4-6 weeks

Manfrotto 338 - Levelling Base

Allow the operator to make fine adjustments up to +/- 5 degrees.
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 243 Car Window Mount Pod with 234RC Tilt Monopod Head

  • Clamps to a window or narrow sill
  • Allow to attach a lightweight scope
  • 3/8'' female thread
  • Supplied with quick release camera plate
Usually ships in 2 - 3 days

Manfrotto 204SPK3 Retractable Spiked Feet Set

A set of 3 spiked feet for the 055CX3 and 055CXPRO3 tripods.
Usually ships in 2 - 3 days

Manfrotto 324 - Survey Tripod Adapter (Indent Only)

A 5/8' bushing with a 3/8' female attachment to connect to a tripod.
No supplier stock Usually ships in 4-6 weeks

Manfrotto 241S Pump Cup with 5/8" (16mm) Socket

  • 150 mm Diameter
  • Takes Standard "Baby" Accessories
  • 2 kg Load Capacity
Usually ships in 2 - 3 days

Manfrotto 356 Wall Mount Camera Support

  • Replaces #3277
  • Designed to be mounted to a wall
  • Supplied with 3 holes for fixing or clamping
  • Comes complete with the Tilt Head
  • 1/4'' screw attachment
Usually ships in 2 - 3 days

Manfrotto 120 - Tripod Adapter

Converts tripod head screw from 3/8' to 1/4'
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 293 - Telephoto Lens Support

Ideal for telephoto lenses without a tripod collar - supports 2.5kg
No supplier stock Usually ships in 4-6 weeks

Manfrotto 030VHS-14 Quick Release w/Video Pin

  • For 3038, 3039, 3047, 3055, 3055S & 3063 heads.
  • 1/4"-20 threaded screw
  • Video locating pin
Usually ships in 2 - 3 days

Manfrotto 430 Long Plate (11") Double Camera Support Platform

  • Replaces #3269
  • Allows mounting of two cameras
Usually ships in 2 - 3 days

Manfrotto 337 2-Axis Flash Hot Shoe Double Bubble Level (337)

  • Effortless mounting
  • Ideal for QTVR shooting sessions
  • Mounts onto hot shoe of 35 mm SLR camera
Usually ships in 2 - 3 days

Manfrotto 190LC Leveling Center Column for Select 190 Series Tripods

  • 50mm Half Ball
  • Aluminium Construction
  • 3/8"-16 Mounting Thread
In stock with NZ supplier Usually ships in 1 - 2 days

Manfrotto 055LLA Low Angle Adapter

  • For O55D/CL Tripods
  • Positioning with minimum distance from the ground
Usually ships in 2 - 3 days