Platinum Tools VDV MapMaster 2.0 Test Kit
This product is no longer available
Features
- Tests CAT6/5e/5/4/3, Shielded Cables, & Coax Cables
- Displays Length Reading in ft or m
- Mapping: Video and Data Cables Using Remotes
- Low Battery Icon Indicator
- Voltage Detection Warning Icon
Description
Test, map, generate tone, and measure cable lengths with the Platinum Tools VDV MapMaster 2.0 Test Kit. Equipped with all the accessories required for voice, data, and video testing, and mapping in the field, this kit is handy.
In the Length Mode (LM), this equipment can measure the length of entire cables and its pin pairs. It even enables you to view and adjust the length constant value for video, data, and voice cables. Moreover, this testing kit lets you examine patch cables without removing the master remote.
Housed in a rugged double-walled blow-moulded case with custom cut-out high-density EVA foam, this kit stays durable for years.
Features
- Tests CAT6/5e/5/4/3, shielded cables, & coax cables
- Displays length reading in feet or metres
- Mapping: video and data cables using the included remotes
Please Note: Optional data and video, custom ID remotes available (sold separately) - Patch cables may be tested without removing the master remote from storage
- Cable test results displayed in a wire map format with connector pin numbers
- Low battery icon indicator
- Voltage detection warning icon
- LOOP ON sets up continuous mode for troubleshooting
Specifications
Maximum Voltage | Between any 2 connector pins without damage RJ Jack: 66 VDC or 55 VAC F-Connector: 50 VDC or AC |
Cable Types | Shielded or Unshielded; Cat7, Cat6x, Cat5e, Cat5, Cat4, Cat3, Coax |
Cable | Maximum RJ Cable Length Testing: 0 to 1,000’ (305 m) Minimum Cable Length for Split Pair Detection: 1.5’ (0.5 m) Maximum Coax Cable Length: Cable resistance varies |
Technology | For measurement: capacitance testing |
Length | Accuracy Without Length Constant Accuracy: ±3% plus ± 1’ Default Length Constant: Restored with power on reset |
Voices | 17.4 pF/ft |
Video | 16.5 pF/ft |
Data | 15 pF/ft |
Battery Life | Typical: 9 V alkaline battery Standby: 4 years Active: 425 hours |
Low Battery Warning | Icon flashes when battery voltage falls below 6 V |
Operating Temperature | 0 to 50˚C |
Storage Temperature | -20 to 60˚C |
Humidity | 10 to 90%, non-condensing |
Dimensions | 6.4 x 2.8 x 1.4" (16.3 x 7.1 x 3.6 cm) |
Weight | 256 g with battery and remote |
In The Box
####### Platinum Tools VDV MapMaster 2.0 Test Kit ######
- Case & Insert Foam
- RJ45 #1-12 Remote Set
- Coax F #1-8 Remote Set
- RJ45 Port Saver
- RJ45 to Alligator Clips Cable
- NO-Fault Cable
- BNC Female to F Female Adapter
- BNC Female to F Male Adapter
- 9V Battery
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Platinum Tools VDV MapMaster 2.0 Test Kit
- Manufacturer: Platinum Tools
- Model: T129K1
- SKU: T129K1
- RM Product #: 36657